CIRP Encyclopedia of Production Engineering

2019 Edition
| Editors: Sami Chatti, Luc Laperrière, Gunther Reinhart, Tullio Tolio


  • Erhan BudakEmail author
Reference work entry



Chatter is one of the most important limitations in machining processes causing poor surface finish, decreased tool life, and damage to the machine tool. Additional operations are required to clean the marks left on the surface; however this may not be possible in cases of severe chatter. In short, chatter vibrations result in reduced productivity, increased cost, and inconsistent product quality.

Chatter is a self-excited vibration type resulting from the dynamic interaction between the cutting tool and the work material (Tobias 1965; Koenigsberger and Tlusty 1967). For forced vibrations arising in mechanical systems, the excitation is independent of the response, i.e., the vibrations do not affect the forces. In self-excited chatter vibrations, on the other hand, the chip thickness becomes modulated due to the vibration marks left on the surface in a previous pass and the present vibrations...
This is a preview of subscription content, log in to check access.


  1. Altintas Y, Budak E (1995) Analytical prediction of stability lobes in milling. Ann CIRP 44(1):357–362CrossRefGoogle Scholar
  2. Altintas Y, Weck M (2004) Chatter stability of metal cutting and grinding. CIRP Ann Manuf Technol 53(2):619–642CrossRefGoogle Scholar
  3. Budak E, Ozlu E (2007) Analytical modeling of chatter stability in turning and boring operations: a multi-dimensional approach. CIRP Ann Manuf Technol 56(1):401–404CrossRefGoogle Scholar
  4. Budak E, Tunc LT (2010) Identification and modeling of process damping in turning and milling using a new approach. CIRP Ann Manuf Technol 59(1):403–408CrossRefGoogle Scholar
  5. Koenigsberger F, Tlusty J (1967) Machine tool structures. Pergamon Press, OxfordGoogle Scholar
  6. Tlusty J (1978) Analysis of the state of research in cutting dynamics. Ann CIRP 27(2):583–589Google Scholar
  7. Tlusty J, Polacek M (1963) The stability of machine tools against self excited vibrations in machining. In: Proceedings of the ASME international research in production engineering conference, Pittsburg, pp 465–474Google Scholar
  8. Tobias SA (1965) Machine tool vibration (trans: Burton AH). Blackie and Sons, GlasgowGoogle Scholar

Copyright information

© CIRP 2019

Authors and Affiliations

  1. 1.Manufacturing Research Laboratory, Faculty of Engineering and Natural SciencesSabanci UniversityIstanbulTurkey

Section editors and affiliations

  • Hans-Christian Möhring
    • 1
  1. 1.Institut für WerkzeugmaschinenUniversität StuttgartStuttgartGermany