CIRP Encyclopedia of Production Engineering

2019 Edition
| Editors: Sami Chatti, Luc Laperrière, Gunther Reinhart, Tullio Tolio

Superfinishing

  • Hitomi YamaguchiEmail author
Reference work entry
DOI: https://doi.org/10.1007/978-3-662-53120-4_6436

Synonyms

Definition

Superfinishing is a process in which a rotating workpiece is finished by a relatively soft stone with fine abrasive oscillating parallel to the workpiece surface. The stone typically oscillates at an amplitude of 1–4 mm and a frequency of 10–50 Hz, and it contacts the workpiece at light pressure, typically 0.1–0.2 MPa. The superfinishing process consists of three phases: (1) the cutting phase, which is characterized by a high material removal rate due to sharp cutting edges; (2) the transition phase, which is characterized by a decrease in the material removal rate due to dulling and loading of the stone; and (3) the finishing phasein which dulling and loading results in only slight or no material removal. In the subsequent superfinishing process, the loaded stone contacts the rough surface of the next workpiece to initiate self-dressing of the stone – providing sharp cutting edges – and the three phases described are repeated. In comparison with...

This is a preview of subscription content, log in to check access.

References

  1. Asaeda T (1952) Superfinishing. J Metal Finish Soc Japan 3(5):165–168 (in Japanese)CrossRefGoogle Scholar
  2. Chang SH, Balasubramhanya S, Chandrasekar S, Farris TN, Hashimoto F, Show MC (1997) Forces and specific energy in superfinishing of hardened steel. Ann CIRP 46(1):257–260CrossRefGoogle Scholar
  3. Farago FT (1980) Abrasive methods engineering. Industrial Press, New YorkGoogle Scholar
  4. Kawamura S, Yano A, Higuchi M, Sugita T (1989) Kakogaku Kiso 2, Kensakukako to Toryukako (Fundamentals of machining technologies 2, Grinding and abrasive technologies), 5th edn. (in Japanese). Kyoritu Shuppan, Tokyo, pp 182–190Google Scholar
  5. Matsui M, Nakasato S (1965) Choshiagesagyo to Sono Genri (Superfinishing processes and their principles) (in Japanese). Yokendo, TokyoGoogle Scholar
  6. Onchi Y, Matsumori N, Ikawa N, Shimada S (1995) Porous fine CBN stones for high removal rate superfinishing. Ann CIRP 44(1):291–294CrossRefGoogle Scholar
  7. Puthanangady TK, Malkin S (1995) Experimental investigation of the superfinishing process. Wear 185:173–182CrossRefGoogle Scholar
  8. Swigert AM (1940) The story of superfinish. Lynn Publishing, DetroitGoogle Scholar
  9. Varghese B, Malkin S (1998) Experimental investigation of methods to enhance stock removal for superfinishing. Ann CIRP 47(1):231–234CrossRefGoogle Scholar

Copyright information

© CIRP 2019

Authors and Affiliations

  1. 1.Mechanical and Aerospace EngineeringUniversity of FloridaGainesvilleUSA

Section editors and affiliations

  • Konrad Wegener
    • 1
  1. 1.Institut für Werkzeugmaschinen und Fertigung (IWF)ETH ZürichZürichSwitzerland