CIRP Encyclopedia of Production Engineering

2019 Edition
| Editors: Sami Chatti, Luc Laperrière, Gunther Reinhart, Tullio Tolio

Grinding Parameters

  • Jens KöhlerEmail author
Reference work entry
DOI: https://doi.org/10.1007/978-3-662-53120-4_6424

Synonyms

Definition

For grinding processes the actuated variables (e.g., cutting speed, feed velocity) and the system variables (e.g., grinding tool properties) have to be distinguished from the grinding parameters. The grinding parameters depend on the actuated and system variables and allow a good correlation to the process forces, process temperatures, surface roughness, and grinding tool wear. The most important grinding parameters, that are described here, are the material removal rate Qw, the material removal rate per unit active grinding wheel width Q′w, the geometrical contact length lg, the kinematic contact length lk, the equivalent chip thickness heq, and the medium single-grain chip thickness hcu.

Theory and Application

Introduction

The grinding process is a geometrically undefined cutting process due to the undefined number and geometry of cutting edges interacting with the workpiece. The load on the workpiece as...

This is a preview of subscription content, log in to check access.

References

  1. Brinksmeier E (1991) Prozess- und Werkstückqualität in der Feinbearbeitung [Process and workpiece quality in fine machining]. Habilitationsschrift, Universität Hannover, Fortschritt-Berichte VDI Reihe 2, Nr. 234. VDI-Verlag, Düsseldorf (in German)Google Scholar
  2. Denkena B, Tönshoff HK (2011) Spanen – Grundlagen [Cutting – basics], 3rd edn. Springer, Berlin/Heidelberg (in German)CrossRefGoogle Scholar
  3. ISO 3002-5 (1989) Basic quantities in cutting and grinding – part 5: basic terminology for grinding processes using grinding wheels. Beuth, BerlinGoogle Scholar
  4. Kurrein M (1927) Die Bearbeitbarkeit der Metalle in Zusammenhang mit der Festigkeitsprüfung [the machinability of metals in correlation to strength test]. Werkstatttechnik 21:612–621 (in German)Google Scholar
  5. Lierse T (1998) Mechanische und thermische Wirkungen beim Schleifen keramischer Werkstoffe [Mechanical and thermal effects in grinding of ceramic materials]. Dr.-Ing. dissertation, Universität Hannover, VDI-Verlag, Düsseldorf (in German)Google Scholar
  6. Reichenbach GS, Mayer JE, Kalpakcioglu S, Shaw MC (1956) The role of chip thickness in grinding. Trans ASME 78:847–859Google Scholar
  7. Saljé E (1991) Begriffe der Schleif- und Konditioniertechnik [Terms in grinding and dressing technology]. Vulkan Verlag, Essen (in German)Google Scholar

Copyright information

© CIRP 2019

Authors and Affiliations

  1. 1.ProWerk GmbHWedemark/HannoverGermany

Section editors and affiliations

  • Konrad Wegener
    • 1
  1. 1.Institut für Werkzeugmaschinen und Fertigung (IWF)ETH ZürichZürichSwitzerland