Encyclopedia of Membranes

Living Edition
| Editors: Enrico Drioli, Lidietta Giorno

Spiral Wound Membrane Module

  • Joerg BalsterEmail author
Living reference work entry
DOI: https://doi.org/10.1007/978-3-642-40872-4_1586-1

Synonyms

Spiral wound membrane; Spiral wound module

A number of membrane module designs are possible, and all are based on two types of membrane geometry: (i) flat sheet membranes and (ii) capillary fibers. Plate-and-frame as well as spiral wound modules house flat membranes (Mulder 1997).

The spiral wound module is an important module type for membrane applications. Initially it was developed for reverse osmosis applications and is nowadays also used in ultrafiltration and gas permeation applications (Blackmer and Hedman 1979).

Spiral wound modules are used where pressure drop has to be considered and when counter current flow is not needed to maximize separation efficiency. Higher pressure applications involving costly pressure vessels and piping make the hollow fiber modules more favorable because this reduces the component costs of the system by as much as a factor of ten in some cases (Koros and Fleming 1993).

The spiral wound module is the next logical step from a flat membrane....
This is a preview of subscription content, log in to check access.

References

  1. Baker RW (2002) Future directions of membrane gas-separation technology. Ind Eng Chem Res 41:1393–1411CrossRefGoogle Scholar
  2. Baker RW, Wijmans JG, Merkel TC, Lin H, Daniels R, Thompson S (2010) Gas separation process using membranes with permeate sweep to remove CO2 from combustion gases, US Patent 2,010,236,404Google Scholar
  3. Bao L, Lipscomb G (2002) Well-developed mass transfer in axial flows through randomly packed fiber bundles with constant wall flux. J Membr Sci 57:125–132Google Scholar
  4. Blackmer RH, Hedman JH (1979) Membrane oxygen enricher apparatus, US Patent 4,174,955Google Scholar
  5. Caro J, Caspary KJ, Hamel C, Hoting B, Kölsch P, Langanke B, Nassauer K, Schiestel T, Schmidt A, Schomäcker R, Seidel-Morgenstern A, Tsotsas E, Voigt I, Wang H, Warsitz R, St. Werth S, Wolf A (2007) Catalytic membrane reactors for process intensification – partial oxidation using perovskite hollow fiber membranes and selective hydrogenation in a catalytic membrane contactor. Ind Eng Chem Res 46:2286–2294CrossRefGoogle Scholar
  6. Feng X, Ivory J (2000) Development of hollow fiber membrane systems for nitrogen generation from combustion exhaust gas Part I. Effects of module configurations. J Membr Sci 176:197CrossRefGoogle Scholar
  7. Koros WJ, Fleming GK (1993) Membrane-based gas separation. J Membr Sci 83:1–80CrossRefGoogle Scholar
  8. Mulder M (1997) Basic principles of membrane technology, 2nd edn. Kluwer, DordrechtGoogle Scholar
  9. Scholz M, Wessling M, Balster J (2011) Design of membrane modules for gas separations. In: Drioli E (ed) Membrane engineering for the treatment of gases: gas-separation problems with membranes. RSC Publishing, (5)Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2013

Authors and Affiliations

  1. 1.Membrane TechnologyEvonik Fibres bmbhSchoerflingAustria