Definition
Surface integrity means the inherent or enhanced condition of a surface produced in a machining or other surface generating operations (according to Field and Kahles 1964).
Theory and Application
History
The term “surface integrity” in the context of machined surfaces was launched by Field and Kahles in the middle of the 1960s (Field and Kahles 1964). Subsequently more and more publications made use of this expression understanding plastic deformation, microcracking, phase transformations, hardness variations, tears and laps, residual stresses etc. as typical measures to investigate.
In 1991 Brinksmeier indicated the following quantities to be measured for the description of surface integrity, including the subsurface for characterization (see Fig. 1): surface – profile, orientation of machining grooves, topography, roughness, etc. and subsurface – material, microstructure, texture, residual...
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ammann N (1994) Quantitative Tiefenprofilanalyse mit der Elektronenstrahlmikrosonde - Entwicklung der Technik und Untersuchungen zur Diffusion von Gallium in ZnSe/GaAs. [Quantitative depth profile analysis by applying electron beam micro sensors – development of the technique and investigations on the diffusion of gallium in ZnSe/GaAs.] Thesis RWTH Aachen (in German), VDI-Verlag, Düsseldorf
Bargel H-J, Schulze G (eds) (1988) Werkstoffkunde [Materials science], 5th edn. VDI Verlag, Düsseldorf (in German)
Borbe C (2001) Bauteilverhalten hartgedrehter Funktionsflächen. [Component behaviour of hard turned functional faces.] Thesis Universität Hannover, Fortschritt-Berichte VDI, Reihe 2, Nr. 583, Berichte aus dem Institut für Fertigungstechnik und Spanende Werkzeugmaschinen, Universität Hannover, VDI-Verlag, Düsseldorf (in German)
Briggs D, Grant JT (eds) (2003) Surface analysis by Auger and X-ray photoelectron spectroscopy. IM Publications, Charlton
Brinksmeier E (1982) Randzonenanalyse geschliffener Werkstücke. [Subsurface analysis of ground workpieces.] Thesis, Universität Hannover (in German)
Brinksmeier E (1991) Prozess- und Werkstückqualität in der Feinbearbeitung. [Process- and workpiece quality in fine machining.] Postdoctoral lecture qualification, Universität Hannover (in German)
Bunge HJ (1969) Mathematische Methoden der Texturanalyse [Mathematical methods in textureanalysis.]. Akademie Verlag, Berlin (in German)
Cullity BD, Stock SR (2001) Elements of X-Ray diffraction, 3rd edn. Prentice Hall, Upper Saddle River
de León LR (2009) Residual stress and part distortion in milled aerospace aluminium. Thesis, Universität Hannover, Bd. 1 von Berichte aus dem IFW, Berichte aus dem IFW, PZH Producktions techn. Zentrum, Hannover
DIN 4760: 1982-06 (1982) Gestaltabweichungen; Begriffe, Ordnungssystem [Form deviations; concepts; classification system], Beuth, Berlin
DIN EN ISO 4287 (2010) Geometrische Produktspezifikation (GPS) – Oberflächenbeschaffenheit: Tastschnittverfahren - Benennungen, Definitionen und Kenngrößen der Oberflächenbeschaffenheit [Geometrical product specifications (GPS) – Surface texture: profile method – terms, definitions and surface texture parameters], Beuth, Berlin (in German)
Field M, Kahles JF (1964) The surface integrity of machined and ground high strength steels. DMIC Report 210:54–77
Gey C (2002) Prozessauslegung für das Flankenfräsen von Titan. [Process design for flank milling of Titanium.] Dissertation Universität Hannover, Verein Deutscher Ingenieure: [Fortschritt Berichte VDI/2] Fortschrittberichte VDI: Reihe 2, Fertigungstechnik; Nr. 625, Berichte aus dem Institut für Fertigungstechnik und Werkzeugmaschinen, Universität Hannover, VDI-Verlag, Düsseldorf
Guo YB, Sahni J (2004) A comparative study of hard turned and cylindrically ground white layers. Int J Mach Tools Manuf 44(2–3):135–145
Inasaki I, Karpuschewski B (2001) Abrasive processes. In: Toenshoff HK, Inasaki I (eds) Sensors applications. Vol 1: sensors in manufacturing. Wiley-VCH, Weinheim, pp 236–271
Jacobus K, DeVor RE, Kapoor SG (2000) Machining-induced residual stress: experimentation and modeling. Trans ASME 122:20–31
Jawahir IS, Brinksmeier E, M'Saoubi R, Aspinwall DK, Outeiro JC, Meyer D, Umbrello D, Jayal AD (2011) Surface integrity in material removal processes: recent advances. CIRP Ann Manuf Technol – Manuf Technol 60(2):603–626
Jenkins R, Snyder RL (1996) Introduction to X-ray powder diffractometry. Wiley, New York
Liu Q, Chen X, Gindy N (2006) Investigation of acoustic emission signals under a simulative environment of grinding burn. Int J Mach Tools Manuf 46(3–4):284–292. doi:10.1016/j.ijmachtools.2005.05.017
Macherauch E, Müller P (1961) Das sin2ψ-Verfahren der röntgenographischen Spannungsmessung. [The sin2ψ-method in X-ray residual stress measurement]. Z Angew Physik 13(7):305–312 (in German)
Renner F, Zenner H, Borbe C, Toenshoff HK (2000) Forschungsbericht P 337: Vergleich der Schwingfestigkeit hartgedrehter und geschliffener Bauteile. [Comparison of the dynamic strength of hard turned and ground workpieces] Studiengesellschaft Stahlanwendung e. V., Stiftung Industrieforschung, Verlag und Vertriebsgesellschaft mbH Düsseldorf (in German)
Saxler W (1997) Erkennung von Schleifbrand durch Schallemissionsanalyse. [Detection of grinding burn by acoustic emission analysis.] Thesis RWTH Aachen, VDI-Verlag, Düsseldorf (in German)
Schwartz AJ, Kumar M, Adams BL, Field DP (eds) (2009) Electron backscatter diffraction in materials science, 2nd edn. Springer, New York
Sollich A (1994) Verbesserung des Dauerschwingverhaltens hochfester Stähle durch gezielte Eigenspannungserzeugung. [Improvement of the fatigue behaviour of high strength steels by targeted generation of residual stress] Thesis Universität Kassel, VDI-Verlag, Düsseldorf (in German)
Spieß L, Teichert G, Schwarzer R, Behnken H, Genzel C (2009) Moderne Röntgenbeugung: Röntgendiffaktometrie für Materialwissenschaftler, Physiker und Chemiker. [Modern X-ray diffraction: X-ray diffractometry for material scientists, physicists and chemists], 2nd edn. Vieweg-Teubner, Wiesbaden (in German)
Thum A, Petersen C, Svenson O (1960) Verformung, Spannung und Kerbwirkung. [Strain, stress and notch effect]. VDI-Verlag, Düsseldorf
Toenshoff HK, Denkena B (2004) Spanen [Cutting], 2nd edn. Springer Verlag, Berlin (in German)
Volk R (2005) Rauheitsmessung – Theorie und Praxis. [Roughness measurement – theory and practice]. Beuth Verlag, Berlin (in German)
Wilken L (2004) Theoretische und experimentelle Untersuchungen zur Optimierung einer Glimmentladungsquelle für spektroskopische Messungen von elektrisch leitenden und nichtleitenden Materialien. [Theoretical and experimental investigations for the optimization of a glow discharge source for spectroscopic measurements of electrically conductive and not-conductive materials.] Thesis TU Dresden, Shaker Verlag, Aachen (in German)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 CIRP
About this entry
Cite this entry
Breidenstein, B. (2014). Surface Integrity. In: Laperrière, L., Reinhart, G. (eds) CIRP Encyclopedia of Production Engineering. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-20617-7_6600
Download citation
DOI: https://doi.org/10.1007/978-3-642-20617-7_6600
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-20616-0
Online ISBN: 978-3-642-20617-7
eBook Packages: EngineeringReference Module Computer Science and Engineering