Advertisement

Ecomaterials in Solar Cell Design

  • Verónica González
  • Israel LópezEmail author
Reference work entry

Abstract

The use of solar cells as a renewable alternative to energy generation is one of the most controversial topics nowadays. The goal of these photovoltaic devices is to meet worldwide energy demand which is mainly supplied by fossil fuels; however, materials and manufacturing costs related to this technology are high. On the other hand, synthesis and application of ecomaterials are trending topics because they lead to the design of new materials that can replace the conventional ones that have a higher environmental impact. Some solar cells use biodegradable materials or materials that can be recycled, which can be classified as ecomaterials. The use of ecomaterials in renewable energy technologies is crucial for the future of sustainability. Ecomaterials can be classified in to materials with less hazardous substance, such as those used in dye-sensitized solar cells, materials with green environmental profile, such as the organic solar cells, materials of higher resources productivity in which plasmonic solar cells can be mentioned, and finally, materials of higher recyclability, such as the silicon of which the cells are mainly composed. The use of ecomaterials leads to the reconceptualization of the way the devices are designed. This chapter gives a different point of view of the design of solar cells, thinking about reducing the environmental impact and improving its performance at the same time.

References

  1. 1.
    Petroleum B (2014) BP Statistical Review of World Energy. 1–48Google Scholar
  2. 2.
    Huen P, Daoud WA (2017) Advances in hybrid solar photovoltaic and thermoelectric generators. Renew Sustain Energy Rev 72:1295–1302.  https://doi.org/10.1016/j.rser.2016.10.042CrossRefGoogle Scholar
  3. 3.
    Marek PL (2013) Biomimetic Dye Aggregate Solar Cells. Springer, Cham.  https://doi.org/10.1007/978-3-319-00636-9CrossRefGoogle Scholar
  4. 4.
    Yu H, Zhang S, Zhao H, Will G, Liu P (2009) An efficient and low-cost TiO2 compact layer for performance improvement of dye-sensitized solar cells. Electrochim Acta 54:1319–1324.  https://doi.org/10.1016/J.ELECTACTA.2008.09.025CrossRefGoogle Scholar
  5. 5.
    Hosseinnezhad M, Moradian S, Gharanjig K (2015) Fruit extract dyes as photosensitizers in solar cells. Curr Sci 109:953–956.  https://doi.org/10.18520/v109/i5/953-956CrossRefGoogle Scholar
  6. 6.
    Shanmugam V, Manoharan S, Anandan S, Murugan R (2013) Performance of dye-sensitized solar cells fabricated with extracts from fruits of ivy gourd and flowers of red frangipani as sensitizers. Spectrochim Acta – Part A Mol Biomol Spectrosc 104:35–40.  https://doi.org/10.1016/j.saa.2012.11.098CrossRefGoogle Scholar
  7. 7.
    Calogero G, Di MG (2008) Red Sicilian orange and purple eggplant fruits as natural sensitizers for dye-sensitized solar cells. Sol Energy Mater Sol Cells 92:1341–1346.  https://doi.org/10.1016/j.solmat.2008.05.007CrossRefGoogle Scholar
  8. 8.
    Sadoughi G, Sivaram V, Gunning R et al (2013) Enhanced electronic contacts in SnO2-dye-P3HT based solid state dye sensitized solar cells. Phys Chem Chem Phys 15:2075–2080.  https://doi.org/10.1039/C2CP43434BCrossRefGoogle Scholar
  9. 9.
    Knipp D, Jovanov V, Tamang A et al (2017) Towards 3D organic solar cells. Nano Energy 31:582–589.  https://doi.org/10.1016/j.nanoen.2016.11.059CrossRefGoogle Scholar
  10. 10.
    Lira-Cantú M, González-Valls I (2016) Nanomaterials for excitonic solar cells. In: Bhushan B (ed) Encyclopedia of Nanotechnology. Springer, Dordrecht, pp 2486–2498CrossRefGoogle Scholar
  11. 11.
    Burke DJ, Lipomi DJ (2013) Green chemistry for organic solar cells. Energy Environ Sci 6:2053.  https://doi.org/10.1039/c3ee41096jCrossRefGoogle Scholar
  12. 12.
    Saunders BR, Turner ML (2008) Nanoparticle-polymer photovoltaic cells. Adv Colloid Interface Sci 138:1–23.  https://doi.org/10.1016/j.cis.2007.09.001CrossRefGoogle Scholar
  13. 13.
    Yang F, Kang D-W, Kim Y-S (2017) An efficient and thermally stable interconnecting layer for tandem organic solar cells. Sol Energy 155:552–560.  https://doi.org/10.1016/J.SOLENER.2017.06.054CrossRefGoogle Scholar
  14. 14.
    Xie F, Choy WCH, Sha WEI et al (2013) Enhanced charge extraction in organic solar cells through electron accumulation effects induced by metal nanoparticles. Energy Environ Sci 6:3372.  https://doi.org/10.1039/c3ee42440eCrossRefGoogle Scholar
  15. 15.
    Singh V (2017) Degradation of fill factor in P3HT:PCBM based organic solar cells. Curr Appl Phys 17:1450–1454.  https://doi.org/10.1016/j.cap.2017.08.010CrossRefGoogle Scholar
  16. 16.
    Shin J, Park J, Park N (2017) A method to recycle silicon wafer from end-of-life photovoltaic module and solar panels by using recycled silicon wafers. Sol Energy Mater Sol Cells 162:1–6.  https://doi.org/10.1016/J.SOLMAT.2016.12.038CrossRefGoogle Scholar
  17. 17.
    Klugmann-Radziemska E, Ostrowski P, Drabczyk K, Panek P, Szkodo M (2010) Experimental validation of crystalline silicon solar cells recycling by thermal and chemical methods. Sol Energy Mater Sol Cells 94:2275–2282.  https://doi.org/10.1016/J.SOLMAT.2010.07.025CrossRefGoogle Scholar
  18. 18.
    Huang W-H, Shin WJ, Wang L et al (2017) Strategy and technology to recycle wafer-silicon solar modules. Sol Energy 144:22–31.  https://doi.org/10.1016/j.solener.2017.01.001CrossRefGoogle Scholar
  19. 19.
    Dias P, Javimczik S, Benevit M et al (2016) Recycling WEEE: extraction and concentration of silver from waste crystalline silicon photovoltaic modules. Waste Manag 57:220–225.  https://doi.org/10.1016/j.wasman.2016.03.016CrossRefGoogle Scholar
  20. 20.
    Atwater HA, Polman A (2010) Plasmonics for improved photovoltaic devices. Nat Mater 9:205–213.  https://doi.org/10.1038/nmat2866CrossRefGoogle Scholar
  21. 21.
    Baek SW, Park G, Noh J et al (2014) Au@Ag core-shell nanocubes for efficient plasmonic light scattering effect in low bandgap organic solar cells. ACS Nano 8(4):3302–3312.  https://doi.org/10.1021/nn500222qCrossRefGoogle Scholar
  22. 22.
    Xiao H, Wang J, Huang H et al (2015) Performance optimization of flexible a-Si: H solar cells with nanotextured plasmonic substrate by tuning the thickness of oxide spacer layer. Nano Energy 11:78–87.  https://doi.org/10.1016/j.nanoen.2014.10.006CrossRefGoogle Scholar
  23. 23.
    Al-Azawi MA, Bidin N, Bououdina M, Mohammad SM (2016) Preparation of gold and gold-silver alloy nanoparticles for enhancement of plasmonic dye-sensitized solar cells performance. Sol Energy 126:93–104.  https://doi.org/10.1016/j.solener.2015.12.043CrossRefGoogle Scholar
  24. 24.
    Stratakis E, Kymakis E (2013) Nanoparticle-based plasmonic organic photovoltaic devices. Mater Today 16:133–146.  https://doi.org/10.1016/j.mattod.2013.04.006CrossRefGoogle Scholar
  25. 25.
    Liu A, Ren Q, Zhao M et al (2014) Photovoltaic performance enhancement of CdS quantum dot-sensitized TiO2 photoanodes with plasmonic gold nanoparticles. J Alloys Compd 589:218–225.  https://doi.org/10.1016/j.jallcom.2013.11.106CrossRefGoogle Scholar
  26. 26.
    Latunussa CEL, Ardente F, Blengini GA, Mancini L (2016) Life Cycle Assessment of an innovative recycling process for crystalline silicon photovoltaic panels. Sol Energy Mater Sol Cells 156:101–111.  https://doi.org/10.1016/j.solmat.2016.03.020CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Universidad Autónoma de Nuevo León, UANL, Facultad de Ciencias QuímicasLaboratorio de Materiales I, Av. Universidad, Cd. UniversitariaSan Nicolás de los GarzaMexico

Personalised recommendations