Advertisement

Recycled Materials and By-Products for Pavement Construction

  • Sherif M. El-BadawyEmail author
  • Alaa R. Gabr
  • Ragaa T. Abd El-Hakim
Reference work entry

Abstract

Over the last decade, there has been a dramatic increase in the use of recycled materials/by-products as alternative ecomaterials in pavement construction on widely varying estimates. This increase is due to the scarcity and depletion of the natural resources and the need of large material quantities for the construction of pavement layers. Many kinds of recycled materials or by-products are exclusively employed in pavement construction such as reclaimed asphalt pavement (RAP), construction and demolition (C&D) waste, waste rocks, glass, steel slag, cement dust, rice husk and straw, wood sawdust, waste plastic bags, crumb rubber, waste engine and cooking oils, and others. Undoubtedly, the use of these recycled materials/by-products in pavement construction has many benefits on the short and long terms. Some of these benefits are minimizing the use of natural resources, saving millions of cubic meters in landfills, reducing carbon dioxide emissions, reducing energy consumption, and constructing sustainable pavements. However, some barriers to adopt such materials in pavement construction still exist worldwide. Such barriers are that lack of clients’ confidence in such materials, lack of specifications and legalization, etc.

This chapter highlights the current status of using recycled materials/by-products in pavement construction worldwide, specifications, and the gained benefits in terms of economic savings, environmental impact, and sustainability. The chapter also outlines the existing barriers and limitations to the prevalence of recycled materials/by-products in pavement construction. Finally, it documents recent approaches and strategies to overcome some of these limitations for successful implementation of such materials in pavement construction.

References

  1. 1.
    Environmental Protection Agency (EPA) (2009) Using recycled industrial materials in Roadways. EPA-530-F-08-024, Environmental Protection Agency-United States, USA. Available from: http://www.epa.gov/industrialmaterials (Last viewed on 5th of July 2017)
  2. 2.
    Jeffrey C (2011) Construction and demolition waste recycling: a literature review. Waste Management Committee, Financial Support Provided by Resource and Recovery Fund Board of Nova Scotia, Dalhousie University’s Office of Sustainability, p 35, Nova Scotia, Canada. https://cdn.dal.ca/content/dam/dalhousie/pdf/dept/sustainability/Final%20C%26D%20literature%20review.pdf (Last viewed on 11th December 2017)
  3. 3.
    Eurostat Statistics Explained. Waste statistics July 2017; May 2017. Available from: http://ec.europa.eu/eurostat/statistics-explained/index.php/Waste_statistics
  4. 4.
    Department of Sustainability, Environment, Water, Population and Communities (DSEWPaC) (2014) Waste generation and resource recovery in Australia, reporting period 2010/11. Final report version 2.6, P321, DSEWPaC and Blue Environment Pty Ltd. Victoria. http://www.environment.gov.au/system/files/resources/4b666638-1103-490e-bdef-480581a38d93/files/wgrra.pdf
  5. 5.
    PIARC (2008) Review of the growth and development of recycling in pavement construction, PIARC Technical Committee C4.3 Road Pavements, ISBN : 2-84060-205-9, World Road Association (PIARC), La Défense cedex, FranceGoogle Scholar
  6. 6.
    Kandhal PS, Mallick RB (1998) FHWA, pavement recycling guidelines for State and Local Governments, report number FHWA-SA-98-042, Federal Highway Administration, Office of Engineering / Office of Technology Applications, 1200 New Jersey Avenue SE, Washington, DC 20590Google Scholar
  7. 7.
    Lee J, Edil T, Tinjum J, Benson C (2010) Quantitative assessment of environmental and economic benefits of recycled materials in highway construction. Transp Res Rec 2158: 138–142CrossRefGoogle Scholar
  8. 8.
    Lee J, Edil TB, Benson CH, Tinjum JM (2013) Building environmentally and economically sustainable transportation infrastructure: green highway rating system. J Constr Eng Manag 139(12):A4013006CrossRefGoogle Scholar
  9. 9.
    Austoroads (2009) Guide to pavement technology: part 4E: recycled materials, Publication No. AGPT04E/09, Project No. TP1565, Austroads, Melbourne, AustraliaGoogle Scholar
  10. 10.
    Chesner WH, Collins RJ, MacKay M (1998) User guidelines for waste and by-product materials in pavement construction. Publication number: FHWA-RD-97-148. FHWA, Washington DCGoogle Scholar
  11. 11.
    Arisha A (2017) Evaluation of recycled clay masonry blends in pavement construction. MSc. thesis, Public Works Engineering Department. Mansoura University, EgyptGoogle Scholar
  12. 12.
    Copeland A (2011) Reclaimed asphalt pavement in asphalt mixtures: state of the practice. Federal Highway Administration, Office of Research, Development and Technology, Turner-Fairbank Highway Research Center, McLeanGoogle Scholar
  13. 13.
    Arshad AK, Mohammad M, Shaffie E, Hashim W, Halim AA (2017) Volumetric analysis and performance of hot mix asphalt with variable rap content. MATEC Web Conf., 103 (2017) 09004, EDP SciencesCrossRefGoogle Scholar
  14. 14.
    Maher, M.H., and Popp, W.J., Jr. 1997. Recycled asphalt pavement as a base and subbase material. In Testing soil mixed with waste or recycled materials. Edited by M.A. Wasemiller and K.B. Hoddinott. ASTM STP 1275. ASTM International, West Conshohocken, PA. pp. 42–53Google Scholar
  15. 15.
    Mousa E, Azam A, El-Shabrawy M, El-Badawy S (2017) Laboratory characterization of reclaimed asphalt pavement for road construction in Egypt. Can J Civ Eng 44(999):417–425CrossRefGoogle Scholar
  16. 16.
    Moon KH, Falchetto AC, Marasteanu M, Turos M (2014) Using recycled asphalt materials as an alternative material source in asphalt pavements. KSCE J Civ Eng 18(1):149CrossRefGoogle Scholar
  17. 17.
    Arulrajah A, Piratheepan J, Disfani M, Bo MW (2012) Geotechnical and geoenvironmental properties of recycled construction and demolition materials in pavement subbase applications. J Mater Civ Eng 25(8):1077–1088CrossRefGoogle Scholar
  18. 18.
    Arisha A, Gabr A, El-Badawy S, Shwally S (2016) Using blends of construction & demolition waste materials and recycled clay masonry brick in pavement. Proc Eng 143:1317–1324CrossRefGoogle Scholar
  19. 19.
    Mashaan NS, Karim MR (2014) Waste tyre rubber in asphalt pavement modification. Mater Res Innov 18(sup6):S6-6–S6-9CrossRefGoogle Scholar
  20. 20.
    Huang Y, Bird RN, Heidrich O (2007) A review of the use of recycled solid waste materials in asphalt pavements. Resour Conserv Recycl 52(1):58–73CrossRefGoogle Scholar
  21. 21.
    Lee S-J, Akisetty CK, Amirkhanian SN (2008) The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements. Constr Build Mater 22(7):1368–1376CrossRefGoogle Scholar
  22. 22.
    Xiao F, Zhao PW, Amirkhanian SN (2009) Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives. Constr Build Mater 23(10):3144–3151CrossRefGoogle Scholar
  23. 23.
    Xiao F, Amirkhanian SN, Shen J, Putman B (2009) Influences of crumb rubber size and type on reclaimed asphalt pavement (RAP) mixtures. Constr Build Mater 23(2):1028–1034CrossRefGoogle Scholar
  24. 24.
    Modarres A, Ayar P (2016) Comparing the mechanical properties of cold recycled mixture containing coal waste additive and ordinary Portland cement. Int J Pavement Eng 17(3): 211–224CrossRefGoogle Scholar
  25. 25.
    Biligiri KP, Kaloush KE (2010) Laboratory evaluation of noise-dampening properties of asphalt mixtures. In: 39th international congress on noise control engineering, INTER-NOISE 2010, Vol. 9, pp. 7298–7307, Lisbon, PortugalGoogle Scholar
  26. 26.
    Way, GB, Carlson DD, Sousa JB, Kaloush KE, Biligiri KP (2010) Introduction to asphalt-rubber pavement noise reducing characteristics. In: 39th international congress on noise control engineering, INTER-NOISE 2010, Vol. 9, pp. 7408–7417, Lisbon, PortugalGoogle Scholar
  27. 27.
    Carlson, DD, Way GB, Zareh A, Kaloush KE, Biligiri KP (2009) Noise characteristics and field performance of five different wearing Courses in Arizona. In: Asphalt rubber 2009 Conference proceedings, 2–4 November, Nanjing, China Google Scholar
  28. 28.
    Khan MS, Hossain S, Kibria G (2015) Slope stabilization using recycled plastic pins. J Perform Constr Facil 30(3):04015054CrossRefGoogle Scholar
  29. 29.
    Vasudevan R, Sekar ARC, Sundarakannan B, Velkennedy R (2012) A technique to dispose waste plastics in an ecofriendly way–application in construction of flexible pavements. Constr Build Mater 28(1):311–320CrossRefGoogle Scholar
  30. 30.
    Hınıslıoğlu S, Ağar E (2004) Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix. Mater Lett 58(3):267–271CrossRefGoogle Scholar
  31. 31.
    Sojobi AO, Nwobodo SE, Aladegboye OJ (2016) Recycling of polyethylene terephthalate (PET) plastic bottle wastes in bituminous asphaltic concrete. Cogent Eng 3(1):1133480Google Scholar
  32. 32.
    Yazoghli-Marzouk O, Vulcano-Greullet N, Cantegrit L, Friteyre L, Jullien A (2014) Recycling foundry sand in road construction–field assessment. Constr Build Mater 61:69–78CrossRefGoogle Scholar
  33. 33.
    Kang D-H, Gupta SC, Ranaivoson AZ, Siekmeier J, Roberson R (2011) Recycled materials as substitutes for virgin aggregates in road construction: I. Hydraulic and mechanical characteristics. Soil Sci Soc Am J 75(4):1265–1275CrossRefGoogle Scholar
  34. 34.
    Bakis R, Koyuncu H, Demirbas A (2006) An investigation of waste foundry sand in asphalt concrete mixtures. Waste Manag Res 24(3):269–274CrossRefGoogle Scholar
  35. 35.
    Guney Y, Aydilek AH, Demirkan MM (2006) Geoenvironmental behavior of foundry sand amended mixtures for highway subbases. Waste Manag 26(9):932–945CrossRefGoogle Scholar
  36. 36.
    Athanasopoulou A, Kollaros G (2015) Fly ash exploited in pavement layers in environmentally friendly ways. Toxicol Environ Chem 97(1):43–50CrossRefGoogle Scholar
  37. 37.
    Saride S, Avirneni D, Javvadi SCP, Puppala AJ, Hoyos LR (2015) Evaluation of fly ash treated reclaimed asphalt pavement for base/subbase applications. Indian Geotech J 45(4):401–411CrossRefGoogle Scholar
  38. 38.
    Lav MA, Lav AH (2014) Effects of stabilization on resilient characteristics of fly ash as pavement material. Constr Build Mater 54:10–16CrossRefGoogle Scholar
  39. 39.
    El-Assaly A, Ellis R (2001) Evaluation of recycling waste materials and by-products in highway construction. Int J Sust Dev World 8(4):299–308CrossRefGoogle Scholar
  40. 40.
    Khan RA, Ganesh A (2016) The effect of coal bottom ash (CBA) on mechanical and durability characteristics of concrete. J Build Mater Struct 3(1):31–42Google Scholar
  41. 41.
    Bassani M, Santagata E, Baglieri O, Ferraris M, Salvo M, Ventrella A (2009) Use of vitrified bottom ashes of municipal solid waste incinerators in bituminous mixtures in substitution of natural sands. Adv Appl Ceram 108(1):33–43CrossRefGoogle Scholar
  42. 42.
    Fall M, Samb S (2008) Pore structure of cemented tailings materials under natural or accidental thermal loads. Mater Charact 59(5):598–605CrossRefGoogle Scholar
  43. 43.
    Nasir O, Fall M (2008) Shear behaviour of cemented pastefill-rock interfaces. Eng Geol 101(3): 146–153CrossRefGoogle Scholar
  44. 44.
    Saltan M, Fındık FS (2008) Stabilization of subbase layer materials with waste pumice in flexible pavement. Build Environ 43(4):415–421CrossRefGoogle Scholar
  45. 45.
    Fall M, Célestin J, Pokharel M, Touré M (2010) A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill. Eng Geol 114(3):397–413CrossRefGoogle Scholar
  46. 46.
    Collins RJ, Ciesielski SK (1994) Recycling and use of waste materials and by-products in highway construction, Synthesis of highway practice series 199, National Research Council (U.S.). Transportation Research Board National Cooperative Highway Research Program, Washington, D.C.: National Academy PressGoogle Scholar
  47. 47.
    Barišić I, Dimter S, Rukavina T (2014) Strength properties of steel slag stabilized mixes. Compos Part B 58:386–391CrossRefGoogle Scholar
  48. 48.
    Dumitru I, Walter P (2001) The use of recycled construction materials in the manufacture of road building materials. In: Beneficial use of recycled materials in transportation applications. Road Transport Authority (RTA), November 13–15, Arlington, AustraliaGoogle Scholar
  49. 49.
    Gabr A, Cameron D, Andrews R, Mitchell P (2011) Comparison of specifications for recycled concrete aggregate for pavement construction. J ASTM Int 8(10):1–15CrossRefGoogle Scholar
  50. 50.
    Reid M (1998) ALT-MAT: alternative materials in road construction. In: Polluted+ marginal land-98. Proceedings of the 5th international conference on re-use of contaminated land and landfills, 7–9 July 1998. Brunel University, LondonGoogle Scholar
  51. 51.
    Souliman M, El-Hakim RA, Davis M, Walubita L (2017) Quantifying the mechanistic and economic impacts of using asphalt rubber mixtures. In: Materials for Sustainable Infrastructures, Struble, Leslie, Tebaldi, Gabriele (Eds.), Proceedings of the 1st GeoMEast International Congress and Exhibition, Egypt 2017,  SpringerGoogle Scholar
  52. 52.
    Rao A, Jha KN, Misra S (2007) Use of aggregates from recycled construction and demolition waste in concrete. Resour Conserv Recycl 50(1):71–81CrossRefGoogle Scholar
  53. 53.
    Stroup-Gardiner M (2013) Recycled materials and byproducts in highway applications, vol 1. Transportation Research Board, Washington, DCCrossRefGoogle Scholar
  54. 54.
    Sonnevera International Corporation (2006) Construction, renovation and demolition waste materials: opportunities for waste reduction and diversion,Final Report, Pub. No: J/105,  Environmental Partnerships and Education Branch, Alberta Environment, Main Floor, Oxbridge Place, Edmonton, Alberta T5K 2J6Google Scholar
  55. 55.
    Llatas, C. (2013) Method for estimating Construction and Demolition (C&D) waste. In: Handbook of recycled concrete and demolition waste. F. Pacheco-Torgal, V. W. Y. Tam, J. A. Labrincha, Y. Ding and J. de Brito (Eds), ISBN: 978-0-85709-682-1, Woodhead Publishing Series in Civil and Structural Engineering, 25-52,  https://doi.org/10.1533/9780857096906.1.25CrossRefGoogle Scholar
  56. 56.
    EPA (2010) Standard for the production and use of waste derived fill. Environmental Protection Agency-South Australia. ISBN 978-1-921495-07-6. Available from: http://www.epa.gov.au
  57. 57.
    Andrews B, Sharp K, Robinson P (2009) Report on construction and demolition waste recycled materials workshop. Draft report, Contract No. RC74540-1, Supported by Zero Waste SA, Resourceco and Adelaide Resource Recovery (ARR), Australian Road Research Board (ARRB), AustraliaGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Sherif M. El-Badawy
    • 1
    Email author
  • Alaa R. Gabr
    • 1
  • Ragaa T. Abd El-Hakim
    • 2
  1. 1.Public Works Engineering Department, Faculty of EngineeringMansoura UniversityMansouraEgypt
  2. 2.Public Works Engineering Department, Faculty of EngineeringTanta UniversityTantaEgypt

Personalised recommendations