Advertisement

Eco-friendly Materials for Chemical Products Manufacturing: Adhesives Derived from Biomass and Renewable Resources

  • O Gómez-Jiménez-AberasturiEmail author
Reference work entry

Abstract

Fossil resources are the main alternative for producing synthetic polymers as foams, plastics, coatings, or adhesives. The limited availability of petroleum, the economic volatility associated to the prices of the petrochemical products and the fact that they are not recyclable, promote the investment in the research of new materials that contain high levels of biomass.

In the specific case of adhesives, some compounds traditionally employed in their synthesis and manufacturing processes are now considered as toxic substances and present problems related to the health and the environment. Furthermore, petroleum-derived monomers present a limited production capacity that may cause the price instability of the final products. It must be noted that the use of renewable materials for adhesives production is not new. This is the case of wood adhesives, where casein or vegetable proteins were extensively employed prior to the development of synthetic adhesives. Further on, petro-derived resins monopolized the market of adhesives owing to their price and functional versatility.

Nowadays, new tendencies driven by academic and industrial groups push the research in new uses of biomass for “green” adhesives production that fulfill technical and economical characteristics equivalent to the corresponding ones of their petrochemical analogs.

References

  1. 1.
    Standard Definitions of Terms Relating to Adhesives, published in Volume 15.06 – Adhesives (1984) Annual book of ASTM standardsGoogle Scholar
  2. 2.
    Wake WC (1978) Theories of adhesion and uses of adhesives: a review. Polymer 19:291–308CrossRefGoogle Scholar
  3. 3.
    Ebnesajjad S, Landrock A (2015) Chapter 1 – Introduction and adhesion theories. In: Adhesives technology handbook, 3rd edn. William Andrew Publishing, Boston, pp 1–18Google Scholar
  4. 4.
    Biofuelsdigest (2017) Global 2016/17 vegetable oil production to hit record level: USDA. Available on web http://www.biofuelsdigest.com/bdigest/2016/09/25/global-201617-vegetable-oil-production-to-hit-record-level-usda/. Accessed 20 July 2017
  5. 5.
    Lligadas G, Ronda JC, Galia M, Cádiz V (2013) Renewable polymeric materials from vegetable oils: a perspective. Mater Today 16:337–343CrossRefGoogle Scholar
  6. 6.
    Metzger JO, Bornscheuer U (2006) Lipids as renewable resources: current state of chemical and biotechnological conversion and diversification. Appl Microbiol Biotechnol 71:13–22CrossRefGoogle Scholar
  7. 7.
    Baumann H, Bühler M, Fochem HF, Zoebelein H, Falbe J (1988) Natural fats and oils – renewable raw materials for the chemical industry. Angew Chem Int Ed Engl 27:41–62CrossRefGoogle Scholar
  8. 8.
    Lorenz CD, Stevens MJ, Wool RP (2004) Fracture behavior of triglyceride-based adhesives. J Polym Sci B Polym Phys 42:3333–3343.  https://doi.org/10.1002/polb.20198CrossRefGoogle Scholar
  9. 9.
    Satas D (1989) Handbook of pressure sensitive adhesive technology, 2nd edn. Van Nostrand Reinold, New YorkCrossRefGoogle Scholar
  10. 10.
    Wool R (2005) Pressure sensitive adhesives, elastomers and coating from plant oil. In: Bio-based polymers and composites, vol 8. Academic, Burlington, pp 256–291. ISBN: 9780127639529.  https://doi.org/10.1016/B978-012763952-9/50009-5CrossRefGoogle Scholar
  11. 11.
    Park SJ, Jin FL, Lee JR (2004) Synthesis and thermal properties of epoxidized vegetable oil. Macromol Rapid Commun 25:724–727.  https://doi.org/10.1002/marc.200300191CrossRefGoogle Scholar
  12. 12.
    Bunker S, Staller C, Willenbacher N, Wool R (2003) Miniemulsion polymerization of acrylated methyl oleate for pressure sensitive adhesives. Int J Adhes Adhes 23(1):29–38.  https://doi.org/10.1016/S0143-7496(02)00079-9. ISSN: 0143-7496CrossRefGoogle Scholar
  13. 13.
    Gettens RJ, Stout GL (1966) Painting materials: a short encyclopedia. Dover Publications, New YorkGoogle Scholar
  14. 14.
    Pizzi A, Dekker M (eds) (1994) Advanced wood adhesives technology. M. Dekker, New YorkGoogle Scholar
  15. 15.
    Wolfgang H, Jürgen L (2011) Phenolic resins. In: Ullmann’s encyclopedia of industrial chemistry. Wiley, SomersetGoogle Scholar
  16. 16.
    Dongre P, Driscoll M, Amidon T, Bujanovic B (2015) Lignin-furfural based adhesives. Energies 8:7897–7914.  https://doi.org/10.3390/en8087897CrossRefGoogle Scholar
  17. 17.
    Pizzi A (2006) Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues. J Adhes Sci Technol 20(8):829–846.  https://doi.org/10.1163/156856106777638635CrossRefGoogle Scholar
  18. 18.
    Kamide K (2005) 1 – Introduction. In: Cellulose and cellulose derivatives. Elsevier, Amsterdam, pp 1–23Google Scholar
  19. 19.
    Conner AH (1989) Cellulosic adhesives. Hemingway RW (ed) Adhesives from renewable resources. ACS Symposium Series, American Chemical Society, Washington DC, pp 271–288.  https://doi.org/10.1021/bk-1989-0385.ch020Google Scholar
  20. 20.
    Petrie EM (1996) Plastic and elastomer adhesives (chapter 7). In: Harper CA (ed) Handbook of plastics and elastomers. McGraw-Hill, New YorkGoogle Scholar
  21. 21.
    Baumann MGD, Conner AH (2003) Carbohydrate polymers as adhesives (chapter 22). In: Pizzi A, Mittal KL (eds) Handbook of adhesive technology, 2nd edn. Marcel Dekker, New YorkGoogle Scholar
  22. 22.
    Hon D N S Cellulosic Adhesives (1989) In: Hemingway RW (ed) Adhesives from renewable resources. ACS Symposium Series, American Chemical Society, Washington DC, pp 289–304.  https://doi.org/10.1021/bk-1989-0385.ch021Google Scholar
  23. 23.
    Shields J (3rd ed) (1984) Adhesives handbook. Butterworths Heinemann, LondonCrossRefGoogle Scholar
  24. 24.
    Rayner CA (1985) Synthetic organic adhesives (chapter 4). In: Houwink R, Salomon G (eds) Adhesion and adhesives, 2nd edn. Elsevier, AmsterdamGoogle Scholar
  25. 25.
    Gandini A, Belgacem MN (1996) Polymeric materials encyclopedia Salamone, vol 11. CRC Press, Boca Raton, pp 8518–8549Google Scholar
  26. 26.
    Application Report: L-Vis 510: Starch Adhesives measuring the dynamic viscosity of starch adhesives in the paper and packaging industry. Available on web https://www.automation.com/pdf_articles/StarchAdhesives.pdf. Accessed 13 May 2017
  27. 27.
    Petrie M (2012) In bio-based components in hot-melt adhesive formulations. Specialchem. Available on web http://www.iterg.com/IMG/pdf/biobased_components_in_hot_melt_adhesive_formulation.pdf. Accessed 25 July 2017
  28. 28.
    Viljanma M, Sodergard A, Mattila R, Tormala P (2002) Hydrolytic and environmental degradation of lactic acid based hot-melt adhesives. Polym Degrad Stab 78:269–278CrossRefGoogle Scholar
  29. 29.
    Viljanma M, Soderg A, Tormäla P (2002) Lactic acid based polymers as hot-melt adhesives for packaging applications. Int J Adhes Adhes 22:219–226CrossRefGoogle Scholar
  30. 30.
    Hu F, Ragauskas A (2012) Pre-treatment and lignocellulosic chemistry. Bioenergy Res 5:1043–1066CrossRefGoogle Scholar
  31. 31.
    Nimz HH (1983) Lignin based wood adhesives. In: Pizzi A (ed) Wood adhesives chemistry and technology, vol 2. Marcel Dekker, New York, pp 247–287Google Scholar
  32. 32.
    Felby C, Pedersen L, Nielsen B (2009) Enhanced auto adhesion of wood fibers using phenol oxidases. Holzforschung – Int J Biol, Chem, Phys Technol Wood 51(3):281–286.  https://doi.org/10.1515/hfsg.1997.51.3.281CrossRefGoogle Scholar
  33. 33.
    Blanchet P, Cloutier A, Riedl B (2000) Wood Sci. Technol 34:11–19CrossRefGoogle Scholar
  34. 34.
    Glasser WG, Sarkanen S (1989) Lignin, properties and materials. ACS symposium series 397, American Chemical Society, Washington, DCGoogle Scholar
  35. 35.
    Dumitrescu L, Manciulea I, Patachia S, Perniu D (2009) Wood adhesives based on lignocellulosic materials. 0577-0579, annals of DAAAM for 2009 & Proceedings of the 20th international DAAAM symposium. ISBN: 978-3-901509-70-4, ISSN: 1726-9679, pp 289, Editor B[ranko] Katalinic, Published by DAAAM International, ViennaGoogle Scholar
  36. 36.
    Gosselink RJA, Abächerli A, Semke H, Malherbe R, Käuper P, Nadif A (2004) Analytical protocols for characterization of Sulphur-free lignin. Ind Crop Prod 19:271–281CrossRefGoogle Scholar
  37. 37.
    Gupta R, Singh S, Jolly S (1978) Phenol–lignin–formaldehyde adhesives for plywood. Holzforsch Holzverwert 30:109–112Google Scholar
  38. 38.
    Peng W, Barry AO, Riedl B (1992) Characterization of methylolated lignin by H-Nmr and 13C NMR. J Wood Chem Technol 12:299–312CrossRefGoogle Scholar
  39. 39.
    Ysbrandy R, Sanderson R, Gerischer G (1992) Adhesives from autohydrolysis bagasse lignin, a renewable resource – part II. DSC thermal analysis of novolac resins. Holzforschung 46:253–256CrossRefGoogle Scholar
  40. 40.
    Ghaffar SH, Fan M (2014) Lignin in straw and its applications as an adhesive. Int J Adhes Adhes 48:92–101CrossRefGoogle Scholar
  41. 41.
    Widsten P, Kandelbauer A (2008) Adhesion improvement of lignocellulosic products by enzymatic pre-treatment. Biotechnol Adv 26:379–386CrossRefGoogle Scholar
  42. 42.
    Forss K, Fuhrmann A (1979) Finnish plywood, particleboard, and fiberboard made with a lignin-base adhesive. For Prod J 29:25–29Google Scholar
  43. 43.
    The up style woodguide.org Available on web http://www.woodguide.org/guide/casein-glue-2/. Accessed 25 July 2017
  44. 44.
    Johnson O (1923) Adhesive formula and the product produced. US Patent 1,460,757Google Scholar
  45. 45.
    Lambuth AL (2001) Blood and casein glues. In: Satas D, Tracton AA (eds) Coatings technology handbook. Marcel Dekker, New York, pp 519–530Google Scholar
  46. 46.
    Backhaus RA (1998) Natural rubber from plants. In: Biopolymers from renewable resources. Springer, Berlin, pp 323–354CrossRefGoogle Scholar
  47. 47.
    Komi EAD, Hamblin MR (2016) Chitin and chitosan: production and application of versatile biomedical nanomaterials. Int J Adv Res 4(3):411–427Google Scholar
  48. 48.
    Rinaudo M (2006) Chitin and chitosan: properties and applications. Prog Polym Sci 31:603–632CrossRefGoogle Scholar
  49. 49.
    Otness JS, Medcalf DG (1972) Chemical and physical characterization of barnacle cement. Comp Biochem Physiol 43:443CrossRefGoogle Scholar
  50. 50.
    Rigby GW (1936) Chemical process and chemical compounds derived therefrom. US Patent 2,047,226Google Scholar
  51. 51.
    Ibrahim V, Mamo G, Gustafsson P, Hatti-kaul R (2013) Production and properties of adhesives formulated from laccase modified Kraft lignin. Ind Crop Prod 45:343–348CrossRefGoogle Scholar
  52. 52.
    Shah NV, Meislin R (2013) Current state and use of biological adhesives in orthopedic surgery. Orthopedics 36:945–956CrossRefGoogle Scholar
  53. 53.
    Burkatovskaya M, Tegos GP, Swietlik E (2006) Use of chitosan bandage to prevent fatal infections developing from highly contaminated wounds in mice. Biomaterials 27:4157–4164CrossRefGoogle Scholar
  54. 54.
    Chu XH, Shi XL, Feng ZQ, Gu ZZ, Ding YT (2009) Chitosan nanofiber scaffold enhances hepatocyte adhesion and function. Biotechnol Lett 31:347–352CrossRefGoogle Scholar
  55. 55.
    Arteche M, Pérez-Álvarez L, Cesteros LC, Katime I (2013) Biodegradable chitosan nanogels crosslinked with genipin. Carbohydr Polym 94:836–842CrossRefGoogle Scholar
  56. 56.
    Belgacem MN, Gandini A (2003) In: Pizzi A, Mittal KL (eds) Handbook of adhesive technology, 2nd edn. Marcel Dekker, New York, pp 615–634Google Scholar
  57. 57.
    Belgacem MN, Gandini A (2003) Handbook of adhesive technology. Revised and expanded A. Pizzi and K. L. Mittal. Print ISBN: 978-0-8247-0986-0Google Scholar
  58. 58.
    Khan I, Poh BT (2011) Natural rubber-based pressure-sensitive adhesives: a review. J Polym Environ 19:793–811.  https://doi.org/10.1007/s10924-011-0299-zCrossRefGoogle Scholar
  59. 60.
    Bertaud F, Tapin-lingua S, Pizzi A, Navarrete P, Conil M (2012) Development of green adhesives for fiberboard manufacturing, using tannins and lignin from pulp mill residues cellulose. Chem Technol 46(7–8):449–455Google Scholar
  60. 61.
    Herbert LH (1989) Condensed tannins in adhesives introduction and historical perspectives hemingway et al. Adhesives from renewable resources ACS symposium series; American Chemical Society, Washington, DCGoogle Scholar
  61. 62.
    Pizzi A (2008) Tannins: Major sources, properties and applications (chapter 8). In: Belgacem MN, Gandini A (eds) Monomers, polymers and composites from renewable resources. Elsevier, Amsterdam, pp 179–199.  https://doi.org/10.1016/B978-0-08-045316-3.00008-9CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Tecnalia Corporación Tecnológica, Energy and environment divisionBasque CountrySpain

Personalised recommendations