Encyclopedia of Wildfires and Wildland-Urban Interface (WUI) Fires

Living Edition
| Editors: Samuel L. Manzello

Building Codes and Standards for New Construction

  • Nelson P. BrynerEmail author
Living reference work entry
DOI: https://doi.org/10.1007/978-3-319-51727-8_69-1

Synonyms

Definition

Building and fire codes are regulations, ordinances, and laws that govern the design, construction, and alteration of buildings. Both codes and standards are comprehensive sets of recommended language or design procedures created by a consensus standards development organization, or by state or national governments. While codes tend to cover broader aspects of exposure to fire, standards tend to focus on more narrow components of exposure to fire. Here, codes and standards will be used interchangeably. Wildland-Urban Interface (WUI) communities exists where humans and their development meet or intermix with wildland fuel (Federal Register 2001). For this contribution, WUI includes the classic interface, mixed interface, occluded interface, and the intermix. WUI building...

This is a preview of subscription content, log in to check access.

References

  1. ASTM E-84 (2018) Standard Test Method for Surface Burning Characteristics of Building Materials, ASTM International, West Conshohocken, PA. https://www.astm.org/Standards/E84.htm
  2. Australian Standard AS 1530.8.1-2007 (2007) Methods for fire tests on building materials, components and structures. Part 8.1: tests on elements of construction for buildings exposed to simulated bushfire attack-Radiant Heat and small flaming sources. Standards Australia, SydneyGoogle Scholar
  3. Australian Standard AS 1530.8.2-2007 (2007) Methods for fire tests on building materials, components and structures. Part 8.1: tests on elements of construction for buildings exposed to simulated bushfire attack-Large flaming sources. Standards Australia, SydneyGoogle Scholar
  4. CalFIRE (2007) California Building Code, California Code of Regulations Title 24, Part 2, Volume 1 of 2, California Building Standards Commission. Chapter 7A, Materials and construction methods for exterior wildfire exposure. https://codes.iccsafe.org/public/chapter/content/1756/
  5. Carnahan JA (1977) In: Jeans DN (ed) Inside back cover, “Australia: a geography”. Sydney University Press, SydneyGoogle Scholar
  6. Cohen JD (2004) Relating flame radiation to home ignition using modeling and experimental crown fires. Can J For Res 34(8):1616–1626MathSciNetCrossRefGoogle Scholar
  7. Construction of buildings in bushfire-prone areas (2009) Australian Standard AS 3959-2009, Standards Australia, Sydney, 110 pp. https://infostore.saiglobal.com/en-us/standards/
  8. Deeming JE, Burgan RE, Cohen JD (1983) The national fire-danger rating system – 1978. USDA forest service, intermountain forest and range experiment station, General Technical Report INT-39, Ogden, UT 63 ppGoogle Scholar
  9. Federal Register, vol 66, Number 3, January 4, 2001.; https://www.gpo.gov/fdsys/pkg/FR-2001-01-04/html/01-52.htm
  10. Hazard Severity Zone Maps (2007) California Department of Forestry and Fire Protection Fire (CalFIRE), Sacramento. www.fire.ca.gov/fire_prevention/fire_prevention_wildland_zones
  11. International Wildland-Urban Interface Code (2015) International Code Council, Washington, DC, 56 ppGoogle Scholar
  12. Jenkins M (2004) WILD4520 Wildland Fire Management and Planning, Spring 2004, Utah State University, Logan, 2004. http://ocw.usu.edu/Forest__Range__and_Wildlife_Sciences/Wildland_Fire_Management_and_Planning/Unit_2__Fuels_Classification_2.html
  13. NFPA 1141: Standard for Fire Protection Infrastructure for Land Development in Wildland, Rural, and Suburban Areas (2017) National Fire Protection Association, Quincy, 28 ppGoogle Scholar
  14. NFPA 1142: Standard on Water Supplies for Suburban and Rural Fire Fighting (2017) National Fire Protection Association, Quincy, 73 ppGoogle Scholar
  15. NFPA 1143: for Wildland Fire Management (2018) National Fire Protection Association, Quincy, 44 ppGoogle Scholar
  16. NFPA 1144: Standard for Reducing Structure Ignition Hazards from Wildland Fire (2018) National Fire Protection Association, Quincy, 38 pGoogle Scholar
  17. Protection Fire and Resource Assessment Program (FRAP) (2017) California Department of Forestry and Fire Protection (CalFIRE), Sacramento, CA. http://frap.fire.ca.gov/
  18. Residential Structural Design Guide (2000) Edition, A State-of-the-Art Review and Application of Engineering Information for Light-Frame Homes, Apartments, and Townhouses, U.S. Department of Housing and Urban Development Office of Policy Development and Research, Washington, DC, Contract H-21065CA, p 434. Feb 2000Google Scholar
  19. Smith JE, Heath LS, Jenkins JC (2002) Forest volume-to-biomass models and estimates of mass for live and standing dead trees of U.S. Forests, General Technical Report NE-298, Northeastern Research Station, U.S. Forest Service, 62 ppGoogle Scholar
  20. Specht RL (1970) Vegetation. In: Leeper GW (ed) Australian environment, 4th edn. Melbourne University Press, Melbourne, pp 44–67Google Scholar
  21. Thurston W, Tory KJ, Fawcett RJB, Kepert JD (2016) Long-range spotting by bushfire plumes: the effects of plume dynamics and turbulence on firebrand trajectory, 5th international fire behaviour and fuels conference, Melbourne, April 2016Google Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  1. 1.Fire ResearchNational Institute of Standards and TechnologyGaithersburgUSA

Section editors and affiliations

  • Michael Gollner
    • 1
  1. 1.Department of Fire Protection EngineeringUniversity of MarylandCollege ParkUSA