Construction Materials Reinforced with Natural Products

Living reference work entry
First Online:
Received:
Accepted:

Abstract

Increasing environmental awareness leads to further research and investigation for new eco-friendly materials. The need for green and renewable materials has never been as prevalent as it currently is and undoubtedly there is increasing interest in materials demonstrating efficient use of renewable resources. Due to the challenges of petroleum-based products and the need to find renewable solutions, more and more companies are looking at natural fiber composite materials. The primary driving forces for new natural-composite materials are the decreased cost of natural fibers, weight reduction, recycling, and the desire for green products. Natural fibers are getting attention from researchers and academicians to utilize in composites mostly due to their eco-friendly nature and sustainability, since they can be sourced from plants or animals. A major goal of natural fiber composites is to alleviate the need to use expensive fibers, which has a relatively high density and is dependent on nonrenewable sources. Another benefit may also include the easy usage/handling of fibers due to their flexibility, because the problem arises when high percentage of fibers is to be used as in case of steel fibers. However, the main disadvantages of natural fibers in composites are the poor compatibility between fiber and matrix and the relative high moisture sorption. Therefore, chemical treatments are considered in modifying the fiber surface properties. The use of natural fibers in the construction sector, as reinforcement of composites (such as cement paste, mortar, and/or concrete), are economical for increasing their certain properties, such as tensile strength, shear strength, toughness, and energy absorption capacity. For all these, natural fibers need to be properly tested and results should be published in a systematic manner with further investigation for using the specific natural fibers as composite construction materials.

Keywords

Natural fibers Fiber-reinforced composites Green construction Eco-friendly materials 
This is a preview of subscription content, log in to check access.

References

  1. 1.
    Fan M, Fu F (2017) Introduction: a perspective natural fibre composites in construction. In: Advanced high strength natural fibre composites in construction. Woodhead publishing series. Elsevier, U.K.Google Scholar
  2. 2.
    Ali M (2012) Natural fibres as construction materials. J Civil Eng Constr Technol 3(3):80–89Google Scholar
  3. 3.
    Bledzki AK, Gassan J (1999) Composites reinforced with cellulose based fibres. Prog Polym Sci 24(2):221–274CrossRefGoogle Scholar
  4. 4.
    Faruk O, Bledzki AK, Fink HP, Sain M (2014) Progress report on natural fiber reinforced composites. Macromol Mater Eng 299:9CrossRefGoogle Scholar
  5. 5.
    Domke VDM, Vishnu P (2015) Natural fiber reinforced building materials. IOSR J Mech Civil Eng (IOSR-JMCE) 12(3):104–107Google Scholar
  6. 6.
    Bledzki AK, Faruk O, Sperber VE (2006) Cars from bio-fibres. Macromol Mater Eng 291:449–457CrossRefGoogle Scholar
  7. 7.
    Ramakrishna G, Sundararajan T (2005) Studies on the durability of natural fibres and the effect of corroded fibres on the strength of mortar. Cem Concr Compos 27(5):575–582CrossRefGoogle Scholar
  8. 8.
    Saheb DN, Jog JP (1999) Natural fiber polymer composites: a review. Adv Polym Technol 18(4):351–363CrossRefGoogle Scholar
  9. 9.
    Mothé CG, Araujo CRD (2004) Thermal and mechanical characterization of polyuretane composites with curaua fibers. Polímeros 14(4):274–278CrossRefGoogle Scholar
  10. 10.
    Silva RV (2003) Composite based on polyurethane resin derived from castor oil and vegetable fibers. Doctoral dissertation, University of São PauloGoogle Scholar
  11. 11.
    Satyanarayana KG, Arizaga GGC, Wypych F (2009) Biodegradable composites based on lignocellulosic fibers – an overview. Prog Polym Sci 34(9):982–1021CrossRefGoogle Scholar
  12. 12.
    Mohanty AK, Misra M, Hinrichsen G (2000) Biofibres, biodegradable polymers and biocomposites: an overview. Macromol Mater Eng 276(1):1–24CrossRefGoogle Scholar
  13. 13.
    Riedel U, Nickel J (1999) Natural fibre-reinforced biopolymers as construction materials –new discoveries. Angew Makromol Chem 272:34–40CrossRefGoogle Scholar
  14. 14.
    Goda K, Sreekala MS, Gomes A, Kaji T, Ohgi J (2006) Improvement of plant based natural fibers for toughening green composites – effect of load application during mercerization of ramie fibers. Compos A: Appl Sci Manuf 37(12):2213–2220CrossRefGoogle Scholar
  15. 15.
    Dan-Mallam Y, Abdullah MZ, MegatYusoff PSM (2012) Predicting the tensile properties of woven kenaf/polyethylene terephthalate (PET) fiber reinforced polyoxymethylene (POM) hybrid laminate composite. Int Organ Sci Res J Mech Civ Eng 2(3):6–13Google Scholar
  16. 16.
    Paul A, Joseph K, Thomas S (1997) Effect of surface treatments on the electrical properties of low-density polyethylene composites reinforced with short sisal fibers. Compos Sci Technol 57(1):67–79CrossRefGoogle Scholar
  17. 17.
    Summerscales J, Dissanayake NPJ, Virk AS, Hall W (2010) A review of bast fibres and their composites. Part 1. Fibres as reinforcements. Compos A: Appl Sci Manuf 41(10):1329–1335CrossRefGoogle Scholar
  18. 18.
    Petinakis E, Yu L, Simon G, Dean K (2013) Natural fibre bio-composites incorporating poly (lactic acid). In: Masuelli M (ed) Fiber reinforced polymers – the technology applied for concrete repair. Intech Open Science, pp 42–59Google Scholar
  19. 19.
    Kalia S, Dufresne A, Cherian BM, Kaith BS, Avérous L, Njuguna J, Nassiopoulos E (2011) Cellulose-based bio-and nanocomposites: a review. Int J Polym Sci 2011:1–35Google Scholar
  20. 20.
    Wambua P, Ivens J, Verpoest I (2003) Natural fibres: can they replace glass in fibre reinforced plastics? Compos Sci Technol 63(9):1259–1264CrossRefGoogle Scholar
  21. 21.
    Mohanty AK, Misra M, Drzal LT (eds) (2005) Natural fibers, biopolymers, and biocomposites. Taylor & Francis, Boca RatonGoogle Scholar
  22. 22.
    Sedan D, Pagnoux C, Smith A, Chotard T (2008) Mechanical properties of hemp fibre reinforced cement: influence of the fibre/matrix interaction. J Eur Ceram Soc 28(1):183–192CrossRefGoogle Scholar
  23. 23.
    Bledzki AK, Jaszkiewicz A, Scherzer D (2009) Mechanical properties of PLA composites with man-made cellulose and abaca fibres. Compos A: Appl Sci Manuf 40(4):404–412CrossRefGoogle Scholar
  24. 24.
    Bledzki AK, Mamun AA, Jaszkiewicz A, Erdmann K (2010) Polypropylene composites with enzyme modified abaca fibre. Compos Sci Technol 70(5):854–860CrossRefGoogle Scholar
  25. 25.
    Heijenrath R, Peijs T (1996) Natural-fibre-mat-reinforced thermoplastic composites based on flax fibres and polypropylene. Adv Compos Lett 5:81–86Google Scholar
  26. 26.
    Roe PJ, Ansell MP (1985) Jute-reinforced polyester composites. J Mater Sci 20(11):4015–4020CrossRefGoogle Scholar
  27. 27.
    Shivnand HK, Inamdar PS, Sapthagiri G (2010, November) Evaluation of tensile and flexural properties of hemp and polypropylene based natural fiber composites. Paper presented at the 2010 2nd international conference of chemical, biological and environmental engineeringGoogle Scholar
  28. 28.
    Joseph PV, Joseph K, Thomas S (1999) Effect of processing variables on the mechanical properties of sisal-fiber-reinforced polypropylene composites. Compos Sci Technol 59(11): 1625–1640CrossRefGoogle Scholar
  29. 29.
    Devi LU, Bhagawan SS, Thomas S (1997) Mechanical properties of pineapple leaf fiber-reinforced polyester composites. J Appl Polym Sci 64(9):1739–1748CrossRefGoogle Scholar
  30. 30.
  31. 31.
  32. 32.
    Sapuan SM, Yusoff NB (2015) The relationship between manufacturing and design for manufacturing in product development of natural fibre composites. Book chapter. In: Salit MS, Jawaid M, Yusoff NB, Enamul Hoque M (eds) Manufacturing of natural fibre reinforced polymer composites. Springer, Cham. ISBN: 978-3-319-07943-1 (Print) 978-3-319-07944-8 (Online)Google Scholar
  33. 33.
    Ku H, Wang H, Pattarachaiyakoop N, Trada M (2011) A review on the tensile properties of natural fiber reinforced polymer composites. Compos Part B 42(4):856–873CrossRefGoogle Scholar
  34. 34.
    Shalwan A, Yousif BF (2013) In state of art: mechanical and tribological behaviour of polymeric composites based on natural fibres. Mater Des 48:14–24CrossRefGoogle Scholar
  35. 35.
    Sassoni E, Manzi S, Motori A, Montecchi M, Canti M (2014) Novel sustainable hemp-based composites for application in the building industry: physical, thermal and mechanical characterization. Energ Buildings 77:219–226CrossRefGoogle Scholar
  36. 36.
    Shinoj S, Visvanathan R, Panigrahi S (2010) Towards industrial utilization of oil palm fibre: physical and dielectric characterization of linear low density polyethylene composites and comparison with other fibre sources. Biosyst Eng 106(4):378–388CrossRefGoogle Scholar
  37. 37.
    Gallo E, Schartel B, Acierno D, Cimino F, Russo P (2013) Tailoring the flame retardant and mechanical performances of natural fiber-reinforced biopolymer by multi-component laminate. Compos Part B 44(1):112–119CrossRefGoogle Scholar
  38. 38.
    Azwa ZN, Yousif BF, Manalo AC, Karunasena W (2013) A review on the degradability of polymeric composites based on natural fibres. Mater Des 47:424–442CrossRefGoogle Scholar
  39. 39.
    Uddin N (2013) Developments in fiber-reinforced polymer (FRP) composites for civil engineering. Woodhead Publishing. Elsevier, U.K.Google Scholar
  40. 40.
    Yan LB, Chouw N (2013) Crashworthiness characteristics of flax fibre reinforced epoxy tubes for energy absorption application. Mater Des 51:629–640CrossRefGoogle Scholar
  41. 41.
    Yan LB (2012) Effect of alkali treatment on vibration characteristics and mechanical properties of natural fabric reinforced composites. J Reinf Plast Compos 31(13):887–896CrossRefGoogle Scholar
  42. 42.
    Yan LB, Chouw N, Yuan XW (2012) Improving the mechanical properties of natural fibre fabric reinforced epoxy composites by alkali treatment. J Reinf Plast Compos 36(6):435–437Google Scholar
  43. 43.
    Balaguru PN, Shah SP (1992) Fiber-reinforced cement composites. McGraw-Hill, New YorkGoogle Scholar
  44. 44.
    Li Z, Wang L, Wang X (2006) Flexural characteristics of coir fibre reinforced cementitious composites. Fibers Polym 7(3):286–294CrossRefGoogle Scholar
  45. 45.
    Hasan NMS, Sobuz HR, Sayed MS, Islam SM (2012) The use of coconut fibre in the production of structural lightweight concrete. J Appl Sci 12(9):831–839CrossRefGoogle Scholar
  46. 46.
    Azeredo H (2009) Nanocomposites for food packaging applications. Food Res Int 42(9): 1240–1253CrossRefGoogle Scholar
  47. 47.
    Corradi S, Isidori T, Corradi M, Soleri F (2009) Composite boat hulls with bamboo natural fibres. Int J Mater Prod Technol 36(1):73–89CrossRefGoogle Scholar
  48. 48.
    Youssef AM, El-Samahy MA, Rehim MHA (2012) Preparation of conductive paper composites based on natural cellulosic fibers for packaging applications. Carbohydr Polym 89(4): 1027–1032CrossRefGoogle Scholar
  49. 49.
    Uddin N, Kalyankar RR (2011) Manufacturing and structural feasibility of natural fiber reinforced polymeric structural insulated panels for panelized construction. Int J Polym Sci 2011:Article 963549CrossRefGoogle Scholar
  50. 50.
    Alvarez-Valencia D, Dagher HJ, Lopez-Anido RA, Davids WG, Gardner DJ, Center AC (2009) Behavior of natural-fiber/thermoplastic sheet piling. Presented at ACMA-composites and polycon conference, 15–17 Jan 2009, TampaGoogle Scholar
  51. 51.
    Drzal L, Mohanty A, Burgueno R, Misra M (2004) Biobased structural composite materials for housing and infrastructure applications: opportunities and challenges. In: Proceedings of the NSF housing research agenda workshop, 12–14 Feb, Orlando, pp 129–140Google Scholar
  52. 52.
    Asasutjarit C, Hirunlabh J, Khedari J, Charoenvai S, Zeghmati B et al (2007) Development of coconut coir-based lightweight cement board. Constr Build Mater 21(2):277–288CrossRefGoogle Scholar
  53. 53.
    Ali M, Briet R, Chouw N (2013) Dynamic response of mortar-free interlocking structures. Constr Build Mater 42:168–189CrossRefGoogle Scholar
  54. 54.
    Cook DJ, Pama RP, Weerasingle HLSD (1978) Coir fibre reinforced cement as a low cost roofing material. Build Environ 13:193–198CrossRefGoogle Scholar
  55. 55.
    Luisito J. Peþamora, Neil J. Melencion and RolendioN (2005). http://www.ecocoboard.net/dwnloads/Presentations%20workshop/Penamora_Coconut%20fibre%20cement%20boards.pdf (November 02, 2009)

Copyright information

© Springer International Publishing AG 2018

Authors and Affiliations

  1. 1.Department of Civil Engineering, Faculty of Engineering and Natural SciencesBahcesehir UniversityIstanbulTurkey
  2. 2.Department of Mechanical EngineeringGraphic Era Hill UniversityDehradunIndia

Personalised recommendations