Definitions
Bending of plates refers to internal states of stress such that the membrane stress resultants vanish. From the kinematic point of view, it means that the in-plane displacements of the material points of the plate are null. In other words, the degrees of freedom of plates in bending are the out-of-plane displacement (thick and thin plates), together with the two material rotations (thick plates only) – see article “Direct Derivation of Plate Theories”.
The out-of-plane displacement is usually called deflection of the plate.
Introduction
This article discusses a few classical, closed-form solutions of plate problems. It is restricted to bending problems of isotropic, homogeneous, linearly elastic plates subjected to distributed forces only (no distributed couples).
The general field equations that govern the bending of such plates (both thick and thin) were...
References
Arnold DN, Falk R (1989) Edge effects in the Reissner-Mindlin plate theory. In: Noor A, Belytschko T, Simo J (eds) Analytical and computational models for shells. American Society of Mechanical Engineers, New York pp 71–90
Arnold DN, Falk RS (1990) The boundary layer for the Reissner–Mindlin plate model. SIAM J Math Anal 21(2):281–312. https://doi.org/10.1137/0521016
Arnold DN, Falk RS (1996) Asymptotic analysis of the boundary layer for the Reissner–Mindlin plate model. SIAM J Math Anal 27(2):486–514. https://doi.org/10.1137/S0036141093245276
Babuška I, Pitkäranta J (1990) The plate paradox for hard and soft simple support. SIAM J Math Anal 21(3):551–576. https://doi.org/10.1137/0521030
Cooke DW, Levinson M (1983) Thick rectangular plates—II. Int Mech Sci 25(3):207–215. https://doi. org/10.1016/0020-7403(83)90094-2
Dauge M, Yosibash Z (2000) Boundary layer realization in thin elastic three-dimensional domains and two-dimensional Hierarchic plate models. Int J Solids Struct 37(17):2443–2471. https://doi.org/10.1016/S0020-7683(99)00004-9
Dauge M, Gruais I, Rössle A (2000) The influence of lateral boundary conditions on the asymptotics in thin elastic plates. SIAM J Math Anal 31(2):305–345. https://doi.org/10.1137/S0036141098333025
Kirchhoff G (1850) Über das Gleichgewicht und die Bewegung einer elastischen Scheibe. Journal für die reine und angewandte Mathematik (Crelles Journal) 1850(40):51–88. https://doi.org/10.1515/crll.1850.40.51
Kromm A (1955) Über die Randquerkräfte bei gestützten Platten. ZAMM – J Appl Math Mech/Zeitschrift für Angewandte Mathematik und Mechanik 35(6–7):231–242. https://doi.org/10.1002/zamm.19550350604
Levinson M, Cooke DW (1983) Thick rectangular plates—I. Int J Mech Sci 25(3):199–205. https://doi. org/10.1016/0020-7403(83)90093-0
Lévy M (1899) Sur l’équilibre élastique d’une plaque rectangulaire. Comptes Rendus des Séances de l’Académie des Sciences 129:535–539
Lim GT, Reddy JN (2003) On canonical bending relationships for plates. Int J Solids Struct 40(12):3039–3067. https://doi.org/10.1016/S0020-7683(03)00084-2
Navier (1823) Extrait des recherches sur la flexion des plans élastiques. Bulletin des Sciences de la Société Philomatique de Paris, pp 92–102. http://philomathique.org/
Reissner E (1947) On bending of elastic plates. Q Appl Math 5(1):55–68
Timoshenko SP, Woinowsky-Krieger S (1959) Theory of plates and shells. McGraw-Hill classic textbook reissue series, 2nd edn. McGraw-Hill Publishing Company, New York
Westphal T, de Barcellos CS, Tomás Pereira J (1996) On general fundamental solutions of some linear elliptic differential operators. Engineering Analysis with Boundary Elements 17(4):279–285. https://doi.org/10.1016/S0955-7997(96)00028-8
Westphal T, Schnack E, de Barcellos C (1998) The general fundamental solution of the sixthorder Reissner and Mindlin plate bending models revisited. Computer Methods in Applied Mechanics and Engineering 166(3–4):363–378. https://doi.org/10.1016/S0045-7825(98)00101-7
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Section Editor information
Rights and permissions
Copyright information
© 2019 Springer-Verlag GmbH Germany, part of Springer Nature
About this entry
Cite this entry
Brisard, S. (2019). Classical Plate Problems. In: Altenbach, H., Öchsner, A. (eds) Encyclopedia of Continuum Mechanics. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-53605-6_133-2
Download citation
DOI: https://doi.org/10.1007/978-3-662-53605-6_133-2
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-53605-6
Online ISBN: 978-3-662-53605-6
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering
Publish with us
Chapter history
-
Latest
Classical Plate Problems- Published:
- 01 March 2019
DOI: https://doi.org/10.1007/978-3-662-53605-6_133-2
-
Original
Classical Plate Problems- Published:
- 23 November 2017
DOI: https://doi.org/10.1007/978-3-662-53605-6_133-1