Abstract
The use of microfluidic devices is making rapid inroads in the modern laboratory. Traditionally, devices have been manufactured in silica owing to its well-understood surface chemistry and micromachining techniques that are ubiquitous in the microelectronics industry. Recently researchers have begun to utilize devices fabricated from polymer substrates as an alternative to glass. Reasons include total cost and the ability to tailor physical and chemical properties. However, traditional microfabrication techniques of molds that are used to fabricate polymer devices by imprinting or injection molding are subject to similar limitations as those associated with silica. In a research and development environment, it is important that researchers have access to fabrication techniques that are rapid and easily implemented with a variety of polymer substrates. Laser ablation has been proven to be such a technique, and this chapter describes the fabrication of a simple injection tee utilizing this technique. This chapter also examines the practical details involved in laser ablation from the perspective of a scientist who desires to utilize a turn-key system.
Key Words
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Soper, S. A., Ford, S. M., Qi, S., McCarley, R. L., Kelly, K., and Murphy, M. C. (2000) Polymeric microelectromechanical systems. Anal. Chem. 72, 642A–651A.
Ford, S. M., Kar, B., Mcwhorter, S., et al. (1998) Microcapillary electrophoresis devices fabricated using polymeric substrates and X-ray lithography. J. Microcolumn Sep. 10, 413–422.
Lowe, H. and Ehrfeld, W. (1999) State-of-the-art in microreaction technology: concepts, manufacturing and applications. Electrochim. Acta 44, 3679–3689.
Lehr, H. and Ehrfeld, W. (1994) Advanced microstructure products by synchrotron-radiation lithography. J. Phys. IV 4, 229–236.
Xu, J. D., Locascio, L. E., Gaitan, M., and Lee, C. S. (2000) Room-temperature imprinting method for plastic microchannel fabrication. Anal. Chem. 72, 1930–1933.
Duffy, D. C., McDonald, J. C., Schueller, O. J. A., and Whitesides, G. M. (1998) Rapid prototyping of microfluidic systems in poly(dimethylsiloxane). Anal. Chem. 70, 4974–4984.
Xia, Y. N. and Whitesides, G. M. (1998) Soft lithography. Annu. Rev. Mater. Sci. 28, 153–184.
Zhao, X. M., Xia, Y. N., and Whitesides, G. M. (1997) Soft lithographic methods for nano-fabrication. J. Mater. Chem. 7, 1069–1074.
Martynova, L., Locascio, L. E., Gaitan, M., Kramer, G. W., Christensen, R. G., and Maccrehan, W. A. (1997) Fabrication of plastic microfluid channels by imprinting methods. Anal. Chem. 69, 4783–4789.
Roberts, M. A., Rossier, J. S., Bercier, P., and Girault, H. H. (1997) UV laser machined polymer substrates for the development of microdiagnostic systems. Anal. Chem. 69, 2035–2042.
Lee, H. J., Fermin, D. J., Corn, R. M., and Girault, H. H. (1999) Marangoni flow in micro-channels. Electrochem. Commun. 1, 190–193.
Rossier, J. S., Schwarz, A., Reymond, F., Ferrigno, R., Bianchi, F., and Girault, H. H. (1999) Microchannel networks for electrophoretic separations. Electrophoresis 20, 727–731.
Emmony, D.C., Howson, R.P., and Willis, L. J. (1973) Laser mirror damage in germanium at 10.6 micrometers. Appl. Phys. Lett. 23, 598–600.
Srinivasan, R. (1982) Action of far ultraviolet-radiation (185-nm) on poly(ethylene-terephthalate) films—a method for controlled dry-etching, Polymer 23, 1863–1864.
Srinivasan, R. and Braren, B. (1989) Ultraviolet-laser ablation of organic polymers. Chem. Rev. 89, 1303–1316.
Lippert, T., Nakamura, T., Niino, H., and Yabe, A. (1997) Laser induced chemical and physical modifications of polymer films: dependence on the irradiation wavelength. Appl. Surf. Sci. 110, 227–231.
Lazare, S. and Drilhole, D. (1997) Submicrometre ablation on polymer surfaces. J. Photochem. Photobiol. A 106, 15–20.
Waddell, E. A., Locascio, L. E., and Kramer, G. W. (2002) UV laser micromachining of polymers for microfluidic applications. J. Assoc. Lab. Automat. 7, 78–82.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Humana Press Inc.
About this protocol
Cite this protocol
Waddell, E.A. (2006). Laser Ablation as a Fabrication Technique for Microfluidic Devices. In: Minteer, S.D. (eds) Microfluidic Techniques. Methods In Molecular Biology™, vol 321. Humana Press. https://doi.org/10.1385/1-59259-997-4:27
Download citation
DOI: https://doi.org/10.1385/1-59259-997-4:27
Publisher Name: Humana Press
Print ISBN: 978-1-58829-517-0
Online ISBN: 978-1-59259-997-4
eBook Packages: Springer Protocols