Abstract
Numerous publications have described the histology of tissue-engineered constructs and tissue-biomaterial interfaces observed with the light microscope (1–5). Indeed, this approach has become a routine method for the evaluation of the biological quality of engineered tissues. Additional microscopical techniques, including immunohistochemistry and confocal microscopy, have also been described. These methods have enabled the localization of important biological molecules in the tissue-engineered construct. However, all of these techniques are limited to describing relatively gross structural features, and they give little insight into the ultrastructural relationships between cells and biomaterials within a construct. Scanning electron microscopy (SEM) has been applied more recently to the study of constructs, but it too provides only limited information and not the “fine detail” of cell-biomaterial interaction (6,7). Despite the limitations noted here, relatively little research has been reported in which the transmission electron microscope (TEM) has been used to study the ultrastructure of cell-polymer constructs. This may be partly because of the difficulties associated with specimen preparation when living tissues and materials are both present. However, these difficulties are not insurmountable. Studies of the cell-biomaterial interface using electron microscopy have been reported in the general field of biomaterials and medical devices (8–11). Here, they have enabled researchers to gain a greater understanding of the response of cells and tissues to biomaterial surfaces.
Keywords
- Transmission Electron Microscope Study
- Propylene Oxide
- Sodium Cacodylate Buffer
- Diamond Knife
- Biomaterial Surface
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Puelacher, W. C., Kim, S. W., Vacanti, J. P., Schloo, B., Mooney, D., and Vacanti, C. A. (1994) Tissue-engineered growth of cartilage: the effect of varying the concentration of chondrocytes seeded onto synthetic polymer matrices. Int. J. Oral Maxillofac. Surg. 23, 49–53.
Rotter, N., Aigner, J., Naumann, A., Planck, H., Hammer, C., Burmester, G., et al. (1998) Cartilage reconstruction in head and neck surgery: comparison of resorbable polymer scaffolds for tissue engineering of human septal cartilage. J. Biomed. Mater. Res. 42, 47–56.
Martin, I., Vunjak-Novakovic, G., Yang, J., Langer, R., and Freed, L. E. (1999) Mammalian chondrocytes expanded in the presence of fibroblast growth factor 2 maintain the ability to differentiate and regenerate three-dimensional cartilaginous tissue. Exp. Cell Res. 253, 681–688.
Holy, C. E., Shoichet, M. S., and Davies, J. E. (2000) Engineering three-dimensional bone tissue in vitro using biodegradable scaffolds: investigating initial cell-seeding density and culture period. J. Biomed. Mater. Res. 51, 376–382.
Salata, L. A., Hatton, P. V., Devlin, A. J., Craig, G. T., and Brook, I. M. (2001) In vitro and in vivo evaluation of e-PTFE and alkali-cellulose membranes for guided bone regeneration. Clin. Oral Implants Res. 12, 62–68.
He, Q., Li, Q., Chen, B., and Wang, Z. (2002) Repair of flexor tendon defects of rabbit with tissue engineering method. Chin. J. Traumatol. 5, 200–208
Caterson, E. J., Li, W. J., Nesti, L. J., Albert, T., Danielson, K., and Tuan, R. S. (2002) Polymer/alginate amalgam for cartilage-tissue engineering. Ann. NY Acad. Sci. 961, 134–138.
Bakker, D., van Blitterswijk, C.A., Hesseling, S. C., Daems, W. T., and Grote, J. J. (1990) Tissue/biomaterial interface characteristics of four elastomers. A transmission electron microscopical study. J. Biomed. Mater. Res. 24, 277–293.
Hatton, P. V., Craig, G. T., and Brook, I. M. (1992) Characterization of the interface between bone and glass-ionomer (polyalkenoate) cement using transmission electron microscopy and X-ray microanalysis. Advances in Biomaterials 10, 331–336. (Doherty, P. J., ed.), Elsevier Science Publishers B.V.
Hatton, P. V., Walsh, J. and Brook, I. M. (1995) The response of cultured bone cells to resorbable polyglycolic acid and reinforced membranes for use in orbital floor repair. Clinical Materials 17, 71–80.
Da Rocha Barros, V. M., Salata, L.A., Van Noort, R., and Hatton, P. V. (2002) In vivo bone tissue response to a canasite glass-ceramic. Biomaterials, 23, 2895–2900.
Glauert, A. M. (1975) Practical Methods in Electron Microscopy (Glauert, A. M., ed), Elsevier, Amsterdam, The Neterlands.
Hayat, M. A. (1989) Principles and Techniques of Electron Microscopy: Biological Applications (Hayat, M. A., ed.), MacMillan Press, London.
van Dorp, A. G., Verhoeven, M. C., Koerten, H. K., van Blitterswijk, C. A., and Ponec, M. (1999) Bilayered biodegradable poly(ethylene glycol)/poly(butylene terephthalate) copolymer (Polyactive) as substrate for human fibroblasts and keratinocytes. J. Biomed. Mater. Res. 47, 292–300.
Marra, K. G., Szem, J. W., Kumta, P. N., DiMilla, P.A., and Weiss, L.E. (1999) In vitro analysis of biodegradable polymer blend/hydroxyapatite composites for bone tissue engineering. J. Biomed. Mater. Res. 47, 324–335.
Springer, I. N., Fleiner, B., Jepsen, S., and Acil, Y. (2001) Culture of cells gained from temporomandibular joint cartilage on non-absorbable scaffolds. Biomaterials 22, 2569–2577.
X Muller, L. L. and Jacks, T. J. (1975) Rapid chemical dehydration of samples for electron microscopic examinations. J. Histochem. Cytochem. 23, 107–112.
Y Conway, K. and Kiernan, J. A. (1999) Chemical dehydration of specimens with 2,2-dimethoxypropane (DMP) for paraffin processing of animal tissues: practical and economic advantages over dehydration in ethanol. Biotech. Histochem. 74, 20–26.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2004 Humana Press Inc.
About this protocol
Cite this protocol
Hatton, P.V. (2004). Transmission Electron Microscopy of Tissue-Polymer Constructs. In: Hollander, A.P., Hatton, P.V. (eds) Biopolymer Methods in Tissue Engineering. Methods in Molecular Biology™, vol 238. Humana Press. https://doi.org/10.1385/1-59259-428-X:197
Download citation
DOI: https://doi.org/10.1385/1-59259-428-X:197
Publisher Name: Humana Press
Print ISBN: 978-0-89603-967-4
Online ISBN: 978-1-59259-428-3
eBook Packages: Springer Protocols