Advertisement

Device Fabrication and Fluorescent Labeling of Preterm Birth Biomarkers for Microchip Electrophoresis

  • Anna V. Nielsen
  • Adam T. WoolleyEmail author
Protocol
Part of the Methods in Molecular Biology book series (MIMB, volume 1972)

Abstract

An unmet need exists for a clinical diagnostic to determine preterm birth (PTB) risk. Such an assessment is possible with high sensitivity and specificity using a panel of nine biomarkers. An integrated microfluidic analysis system for these biomarkers is being developed which includes microchip electrophoresis (μCE) separation. A t-shaped microchip device can be used to test the μCE portion of this integrated system to find appropriate separation conditions. These t-shaped microchips can be fabricated using photolithographically patterned Si templates and hot embossing. PTB biomarkers can be fluorescently labeled using an amine-reactive dye prior to μCE. The μCE conditions established using this t-shaped device should be useful in developing a complete integrated microfluidic system for PTB risk assessment.

Key words

Microfluidics Point-of-care diagnostics Rapid analysis Photolithography Cyclic olefin copolymer Hot embossing Laser induced fluorescence 

References

  1. 1.
    World Health Organization (2012) Born too soon: the global action report on preterm birth. WHO, GenevaGoogle Scholar
  2. 2.
    March of Dimes (2013) Prematurity campaign: 2013 progress report. March of Dimes Foundation, White PlainsGoogle Scholar
  3. 3.
    Esplin MS, Merrell K, Goldenberg R et al (2011) Proteomic identification of serum peptides predicting subsequent spontaneous preterm birth. Am J Obstet Gynecol 204:391e1–391e8CrossRefGoogle Scholar
  4. 4.
    Sonker M, Knob R, Sahore V, Woolley AT (2017) Integrated electrokinetically driven microfluidic devices with pH-mediated solid-phase extraction coupled to microchip electrophoresis for preterm birth biomarkers. Electrophoresis 38:1743–1754CrossRefGoogle Scholar
  5. 5.
    Sahore V, Sonker M, Nielsen AV, Knob R, Kumar S, Woolley AT (2018) Automated microfluidic devices integrating solid-phase extraction, fluorescent labeling, and microchip electrophoresis for preterm birth biomarker analysis. Anal Bioanal Chem 410:933–941CrossRefGoogle Scholar
  6. 6.
    Sonker M, Parker EK, Nielsen AV, Sahore V, Woolley AT (2018) Electrokinetically operated microfluidic devices for integrated immunoaffinity monolith extraction and electrophoretic separation of preterm birth biomarkers. Analyst 143:224–231CrossRefGoogle Scholar
  7. 7.
    Nielsen AV, Nielsen JB, Knob R, Sahore V, Woolley AT (2018) Separation of a panel of preterm birth biomarkers using microchip electrophoresis. Electrophoresis 39:2300–2307Google Scholar
  8. 8.
    Beauchamp MJ, Nordin GP, Woolley AT (2017) Moving from millifluidic to truly microfluidic sub-100-μm cross-section 3D printed devices. Anal Bioanal Chem 409:4311–4319CrossRefGoogle Scholar
  9. 9.
    Gong H, Bickham BP, Woolley AT, Nordin GP (2017) Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels. Lab Chip 17:2899–2909CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of Chemistry and BiochemistryBrigham Young UniversityProvoUSA

Personalised recommendations