1. Influenza viral detection on microfluidic delivery assisted biosensors

   • Thangavel Lakshmipriya
   • Subash C. B. Gopinath
   • Uda Hashim

   Review Article 30 September 2017 Pages: 823 - 830

   

2. 2.5/3D dynamically stretchable and permanently shaped electronic circuits

   • Imen Chtioui
   • Frederick Bossuyt
   • Med Hedi Bedoui

   Review Article 26 October 2017 Pages: 831 - 853

   

3. Optimal design of high-g MEMS piezoresistive accelerometer based on Timoshenko beam theory

   • Feng Liu
   • Shiqiao Gao
   • Ping Li

   Review Article 01 December 2017 Pages: 855 - 867

   

4. Embedded passive components in advanced 3D chips and micro/nano electronic systems

   • Muhammad Imran Khan
   • Huang Dong
   • Rizwan Shoukat

   Review Article 20 October 2017 Pages: 869 - 877

   

5. Controllable printing droplets on demand by piezoelectric inkjet: applications and methods

   • Kai Li
   • Jun-kao Liu
   • Lu Zhang

   Review Article 12 December 2017 Pages: 879 - 889

   

6. Thermoelectric spherical shell with fractional order heat transfer

   • Magdy A. Ezzat
   • Alla. A. El-Bary

   Technical Paper 01 April 2017 Pages: 891 - 899

   

7. Design and performance analysis of uniform meander structured RF MEMS capacitive shunt switch along with perforations

   • Akshay Kumar Ravirala
   • Leela Koteswari Bethapudi
   • Srinivasa Rao Karumuri

   Technical Paper 28 April 2017 Pages: 901 - 908

   

8. Design and performance evaluation of a haptic interface based on MR fluids for endovascular tele-surgery

   • Yu Song
   • Shuxiang Guo
   • Hidenori Ishihara

   Technical Paper 19 April 2017 Pages: 909 - 918

   

9. Analysis of nonlocal nonlinear behavior of graphene sheet circular nanoplate actuators subject to uniform hydrostatic pressure

   • Ming-Xian Lin
   • Hsin-Yi Lai
   • Cha’o-Kuang Chen

   Technical Paper 24 April 2017 Pages: 919 - 928

   

10. Bulk silicon micromachined suspended fixed-end SiO₂ film capacitor for passive high-pass RC filter

    • Jianxiong Zhu
    • Hua Zhu

    Technical Paper 11 April 2017 Pages: 929 - 934

    

11. A smooth impact drive mechanism actuation method for flapping wing mechanism of bio-inspired micro air vehicles

    • Yuxin Peng
    • Li Liu
    • Jian Wang

    Technical Paper 05 May 2017 Pages: 935 - 941

    

12. Piezoelectric-driven miniature wheeled robot based on flexible transmission mechanisms

    • Sui Zhou
    • Weiping Zhang
    • Zhiyu Xun

    Technical Paper 27 April 2017 Pages: 943 - 950

    

13. Two-temperature theory in Green–Naghdi thermoelasticity with fractional phase-lag heat transfer

    • Magdy A. Ezzat
    • Ahmed S. El-Karamany
    • Alaa A. El-Bary

    Technical Paper 03 May 2017 Pages: 951 - 961

    

14. Dynamic transverse vibration characteristics and vibro-buckling analyses of axially moving and rotating nanobeams based on nonlocal strain gradient theory

    • Song Guo
    • Yuming He
    • Zhenkun Li

    Technical Paper 22 May 2017 Pages: 963 - 977

    

15. Design optimization of high performance tapping mode AFM probe

    • Zhenhua Li
    • Tielin Shi
    • Qi Xia

    Technical Paper 19 May 2017 Pages: 979 - 987

    

16. Nanotechnology based electrical control and navigation system for worm guidance using electric field gradient

    • Rizwan Shoukat
    • Muhammad Imran Khan

    Technical Paper 19 May 2017 Pages: 989 - 993

    

17. Large deformation of nonlinear elastic nanofilms with surface energy

    • S. Zeng
    • K. F. Wang
    • T. T. Guo

    Technical Paper 25 May 2017 Pages: 995 - 1001

    

18. Finite element analysis of multi-level interconnection under cyclic thermomechanical loads

    • Kuo-Tsai Wu
    • Sheng-Jye Hwang
    • Bing-Yeh Lin

    Technical Paper 25 May 2017 Pages: 1003 - 1016

    

19. On the performances of a nonlinear hybrid piezoelectric and electromagnetic energy harvester

    • Ping Li
    • Shiqiao Gao
    • Haipeng Liu

    Technical Paper 29 May 2017 Pages: 1017 - 1024

    

20. Design and development of a clip building block system for MEMS

    • Rizwan Shoukat
    • Muhammad Imran Khan

    Technical Paper 29 May 2017 Pages: 1025 - 1031

    

21. Design of VCM actuator with L-shape coil for smartphone cameras

    • Chang-Lin Hsieh
    • Yu-Hao Chang
    • Chien-Sheng Liu

    Technical Paper 27 May 2017 Pages: 1033 - 1040

    

22. Energy management strategy to simplify the hardware structure of wireless sensor nodes

    • Yiyuan Zhang
    • Jiahao Zhao
    • Zheng You

    Technical Paper 15 June 2017 Pages: 1041 - 1051

    

23. Design and experimental testing of an electro-thermal microgripper for cell manipulation

    • Aurelio Somà
    • Sonia Iamoni
    • Changhai Wang

    Technical Paper 05 June 2017 Pages: 1053 - 1060

    

24. Design and modeling of a frog-shape MEMS capacitive microphone using SOI technology

    • Sedighe Babaei Sedaghat
    • Bahram Azizolla Ganji
    • Reza Ansari

    Technical Paper 05 June 2017 Pages: 1061 - 1070

    

25. A microfluidic pore model to study the migration of fine particles in single-phase and multi-phase flows in porous media

    • Jongwon Jung
    • Shuang Cindy Cao
    • Jin-Woo Choi

    Technical Paper 12 June 2017 Pages: 1071 - 1080

    

26. Pre-buried mask wet etching for suspended silicon microstructures applied in rocking mass micro-gyroscope

    • Xiong Wang
    • Xiao-bin Xu
    • Xue-zhong Wu

    Technical Paper 15 June 2017 Pages: 1081 - 1087

    

27. Squeeze film air damping ratio analysis of a silicon capacitive micromechanical accelerometer

    • Yuming Mo
    • Lianming Du
    • Jie Yang

    Technical Paper 10 June 2017 Pages: 1089 - 1095

    

28. Design and analysis of a microfluidic colour-changing glasses controlled by shape memory alloy (SMA) actuators

    • Min Zhang
    • Songjing Li

    Technical Paper 30 June 2017 Pages: 1097 - 1107

    

29. Theoretical study of an electrostatically actuated torsional microsensor for biological applications

    • Adam M. S. Bouchaala

    Technical Paper 15 June 2017 Pages: 1109 - 1114

    

30. UV-NIL replication of microlens arrays on flexible fluoropolymer substrates

    • Dalius Jucius
    • Algirdas Lazauskas
    • Sigitas Tamulevičius

    Technical Paper 15 June 2017 Pages: 1115 - 1125

    

31. Quality factor enhancement of an on-chip inductor through the slot-trace method

    • Ja-Hao Chen

    Technical Paper 27 June 2017 Pages: 1127 - 1132

    

32. Cylindrical functionally graded shell model based on the first order shear deformation nonlocal strain gradient elasticity theory

    • Kianoosh Mohammadi
    • Mohammad Mahinzare
    • Majid Ghadiri

    Technical Paper 01 July 2017 Pages: 1133 - 1146

    

33. Load deflection analysis of rectangular graphene diaphragm for MEMS intracranial pressure sensor applications

    • S. H. A. Rahman
    • N. Soin
    • F. Ibrahim

    Technical Paper 29 June 2017 Pages: 1147 - 1152

    

34. Modeling and simulation of a suspended microchannel resonator nano-sensor

    • Manizhe Zakeri
    • Seyed Mahmoud Seyedi Sahebari

    Technical Paper 25 July 2017 Pages: 1153 - 1166

    

35. Uncertainty propagation in the buckling behavior of few-layer graphene sheets

    • A. R. Ghanipour
    • E. Ghavanloo
    • S. Pouresmaeeli

    Technical Paper 03 July 2017 Pages: 1167 - 1177

    

36. Stress analysis of perforated graphene nano-electro-mechanical (NEM) contact switches by 3D finite element simulation

    • Mohd Amir Zulkefli
    • Mohd Ambri Mohamed
    • Hiroshi Mizuta

    Technical Paper 06 July 2017 Pages: 1179 - 1187

    

37. Nonlocal thermoelastic model for temperature-dependent thermal conductivity nanobeams due to dynamic varying loads

    • Ahmed E. Abouelregal
    • Ashraf M. Zenkour

    Technical Paper 12 July 2017 Pages: 1189 - 1199

    

38. Analysis of harmonic contents of switching waveforms emitted by the ultra high speed digital CMOS integrated circuits for use in future micro/nano systems applications

    • Muhammad Imran Khan
    • Rizwan Shoukat
    • Huang Dong

    Technical Paper 10 July 2017 Pages: 1201 - 1206

    

39. Fabrication of electrochemical carbon-based microelectrodes using electrohydrodynamic jet printing technique

    • Zheng Xu
    • Hong-qun Zou
    • Jun-shan Liu

    Technical Paper 15 July 2017 Pages: 1207 - 1212

    

40. Design and analysis of a new three-axis micro-gyroscope

    • Bo Yang
    • Chengfu Lu

    Technical Paper 18 July 2017 Pages: 1213 - 1222

    

41. A method to fabricate high-aspect-ratio microstructures using PMMA photoresist

    • Tianchong Zhang
    • Futing Yi
    • Yue Zhou

    Technical Paper 17 July 2017 Pages: 1223 - 1226

    

42. Thermo-electro-mechanical bending of FG piezoelectric microplates on Pasternak foundation based on a four-variable plate model and the modified couple stress theory

    • Mohammad Alakel Abazid
    • Mohammed Sobhy

    Technical Paper 20 July 2017 Pages: 1227 - 1245

    

43. Development of a ceramic injection molding process for liquid jet nozzles to be applied for X-ray free-electron lasers

    • Volker Piotter
    • Alexander Klein
    • Saša Bajt

    Technical Paper 24 July 2017 Pages: 1247 - 1252

    

44. A comparative discussion of different designs of passive micromixers: specific sensitivities of mixing efficiency on Reynolds numbers and fluid properties

    • Xia Huanming
    • Wu Jiawei
    • Wang Zhiping

    Technical Paper 18 July 2017 Pages: 1253 - 1263

    

45. Development of efficient size-dependent plate models for axial buckling of single-layered graphene nanosheets using molecular dynamics simulation

    • S. Sahmani
    • A. M. Fattahi

    Technical Paper 25 July 2017 Pages: 1265 - 1277

    

46. Transient thermal analysis of underground power cables using two dimensional finite element method

    • A. K. Naskar
    • N. K. Bhattacharya
    • D. Sarkar

    Technical Paper 01 September 2017 Pages: 1279 - 1293

    

47. A new three-level fault tolerance arithmetic and logic unit based on quantum dot cellular automata

    • Mahya Rahimpour Gadim
    • Nima Jafari Navimipour

    Technical Paper 02 August 2017 Pages: 1295 - 1305

    

48. Correction to: A new three-level fault tolerance arithmetic and logic unit based on quantum dot cellular automata

    • Mahya Rahimpour Gadim
    • Nima Jafari Navimipour

    Correction 18 January 2018 Pages: 1307 - 1307

    

49. Analysis of RF MEMS shunt capacitive switch with uniform and non-uniform meanders

    • K. Girija Sravani
    • K. Srinivasa Rao

    Technical Paper 09 August 2017 Pages: 1309 - 1315

    

50. Semi-inverse method for a plane strain gradient orthotropic elastic rectangle in tension

    • A. R. El-Dhaba

    Technical Paper 12 August 2017 Pages: 1317 - 1331