1. Foreword to special issue on Design, Test, Integration and Packaging of MEMS/MOEMS, 2008

   • Bernard Courtois
   • Bernd Michel

   Editorial 26 May 2009 Pages: 1119 - 1119

   

2. Experimental validation of compact damping models of perforated MEMS devices

   • Timo Veijola
   • Giorgio De Pasquale
   • Aurelio Somà

   Technical Paper 17 February 2009 Pages: 1121 - 1128

   

3. Frequency-dependent noise analysis and damping in MEMS

   • Mrigank Sharma
   • Edmond Cretu

   Technical Paper 13 January 2009 Pages: 1129 - 1139

   

4. Trapping of cells by insulator-based dielectrophoresis using open-top microstructures

   • Chun-Ping Jen
   • Teng-Wen Chen

   Technical Paper 05 November 2008 Pages: 1141 - 1148

   

5. Hot roller embossing for microfluidics: process and challenges

   • S. H. Ng
   • Z. F. Wang

   Technical Paper 28 October 2008 Pages: 1149 - 1156

   

6. Microfluidic device for continuous magnetophoretic separation of white blood cells

   • Ciprian Iliescu
   • Guolin Xu
   • Andrei Avram

   Technical Paper 25 October 2008 Pages: 1157 - 1162

   

7. High quality factor silicon cantilever driven by piezoelectric thin film actuator for resonant based mass detection

   • Jian Lu
   • Tsuyoshi Ikehara
   • Ryutaro Maeda

   Technical Paper 28 October 2008 Pages: 1163 - 1169

   

8. Design and fabrication of novel micro electromagnetic actuator

   • Chia-Yen Lee
   • Zgen-Hui Chen
   • Chiang-Ho Cheng

   Technical Paper 26 November 2008 Pages: 1171 - 1177

   

9. A single chip, double channel thermal flow meter

   • P. Bruschi
   • M. Dei
   • M. Piotto

   Technical Paper 19 November 2008 Pages: 1179 - 1186

   

10. Micro-hotplate based temperature stabilization system for CMOS SAW resonators

    • Anis Nurashikin Nordin
    • Ioana Voiculescu
    • Mona Zaghloul

    Technical Paper 10 February 2009 Pages: 1187 - 1193

    

11. A microwave probe nanostructure for atomic force microscopy

    • Y. Ju
    • M. Hamada
    • H. Soyama

    Technical Paper 03 February 2009 Pages: 1195 - 1199

    

12. A microcantilever-based gas flow sensor for flow rate and direction detection

    • Rong-Hua Ma
    • Po-Cheng Chou
    • Chia-Yen Lee

    Technical Paper 20 November 2008 Pages: 1201 - 1205

    

13. Design and development of a novel paddle test structure for the mechanical behavior measurement of thin films application for MEMS

    • Chi-Jia Tong
    • Ming-Tzer Lin

    Technical Paper 19 December 2008 Pages: 1207 - 1216

    

14. Linear and non-linear behavior of mechanical resonators for optimized inertial electromagnetic microgenerators

    • C. Serre
    • A. Pérez-Rodríguez
    • J. Esteve

    Technical Paper 31 March 2009 Pages: 1217 - 1223

    

15. Study on micro hot embossing of low temperature co-firable ceramic green substrates

    • Xuechuan Shan
    • H. P. Maw
    • Y. C. Lam

    Technical Paper 25 October 2008 Pages: 1225 - 1232

    

16. Design methodology and fabrication process of a microinductor for the next generation of DC–DC power converters

    • David Flynn
    • Marc P. Y. Desmulliez

    Technical Paper 07 April 2009 Pages: 1233 - 1243

    

17. Megasonic agitation for enhanced electrodeposition of copper

    • Jens Georg Kaufmann
    • Marc P. Y. Desmulliez
    • David Hutt

    Technical Paper 02 June 2009 Pages: 1245 - 1254

    

18. New high fill-factor triangular microlens array fabrication method using UV proximity printing

    • Tsung-Hung Lin
    • Hsiharng Yang
    • Shih-Yu Hung

    Technical Paper 14 November 2008 Pages: 1255 - 1261

    

19. New high fill-factor triangular microlens array fabrication method using UV proximity printing

    • Tsung-Hung Lin
    • Hsiharng Yang
    • Shih-Yu Hung

    Erratum 30 May 2009 Pages: 1263 - 1264

    

20. Micro-electroforming metallic bipolar electrodes for mini-DMFC stacks

    • Ruey Fang Shyu
    • Hsiharng Yang
    • Jun-Han Lee

    Technical Paper 31 October 2008 Pages: 1265 - 1271

    

21. A low-cost through via interconnection for ISM WLP

    • Jingli Yuan
    • Won-Kyu Jeung
    • Sung Yi

    Technical Paper 13 January 2009 Pages: 1273 - 1277

    

22. Contactless thermal characterization of high temperature test chamber

    • György Bognár
    • Z. Szűcs
    • M. Rencz

    Technical Paper 13 January 2009 Pages: 1279 - 1285

    

23. Processing and characterisation of precision microparts from nickel-based materials

    • D. M. Allen
    • H. J. Almond
    • M. Saumer

    Technical Paper 11 November 2008 Pages: 1287 - 1291

    

24. Characterization and modeling of electro-thermal MEMS structures

    • Péter Gábor Szabó
    • Vladimír Székely

    Technical Paper 14 April 2009 Pages: 1293 - 1301

    

25. Package hermeticity testing with thermal transient measurements

    • András Vass-Várnai
    • Márta Rencz

    Technical Paper 11 February 2009 Pages: 1303 - 1309

    

26. Study of mechanical response in micro-indentation of laminated ceramic green substrates

    • Y. C. Liu
    • Xuechuan Shan

    Technical Paper 20 November 2008 Pages: 1311 - 1317

    

27. A micro roller embossing process for structuring large-area substrates of laminated ceramic green tapes

    • Xuechuan Shan
    • Y. C. Soh
    • C. W. Lu

    Technical Paper 20 November 2008 Pages: 1319 - 1325

    

28. Sub-μm structured lotus surfaces manufacturing

    • Matthias Worgull
    • M. Heckele
    • H. N. Hansen

    Technical Paper 13 December 2008 Pages: 1327 - 1333