1. Structural, piezoelectric, and dielectric properties of PZT-based ceramics without excess lead oxide

   • Maliha Siddiqui
   • Julie Juliewatty Mohamed
   • Zainal Arifin Ahmad

   Research 14 March 2019 Pages: 371 - 377

   

2. Preparation and properties of tubular macroporous ceramic membrane supports based on natural quartz sand and dolomite

   • Cheikh Kadiri
   • Abdelhamid Harabi
   • Boukhemis Boudaira

   Research 22 March 2019 Pages: 379 - 387

   

3. Effect of Y₂O₃ doping on the high-temperature properties of magnesia aluminate spinel refractories

   • Jiangbo Liu
   • Zhoufu Wang
   • Yan Ma

   OriginalPaper Open access 13 March 2019 Pages: 389 - 394

   

4. Pyroelectric performance of [Bi_0.48Na_0.4032K_0.0768]Sr_0.04(Ti_0.975Nb_0.025)O₃ ceramics

   • K. S. Srikanth
   • V. P. Singh
   • Rahul Vaish

   OriginalPaper 01 April 2019 Pages: 395 - 402

   

5. Effect of dopant elements on structure and morphology of SnO₂ nanoparticles

   • Seher Tas Anli
   • Mehmet Faruk Ebeoglugil
   • Erdal Celik

   Research 16 March 2019 Pages: 403 - 411

   

6. The effect of alumina additive and sintering temperature on the microstructural, physical, mechanical, and bioactivity properties of hydroxyapatite–alumina composites

   • Suleyman Serdar Pazarlioglu
   • Serdar Salman

   Research 08 April 2019 Pages: 413 - 431

   

7. Effect of sintering temperature on the structural and physical properties of forsterite using amorphous rice husk silica as refractory precursors

   • Simon Sembiring
   • Agus Riyanto
   • Rudy Situmeang

   Research 17 April 2019 Pages: 433 - 440

   

8. Influence of CuO and ZnO additions on grain growth and proton conductivity of Y-doped BaZrO₃

   • Onthida Kosasang
   • Rattapong Jareun
   • Sakuna Mach-mumas

   Research 09 April 2019 Pages: 441 - 446

   

9. Sol-gel synthesis of red phosphor GdPO₄-Gd₃PO₇:Eu³⁺: luminescence and morphology

   • A. Rosas Camacho
   • F. Carrillo Romo
   • J. Oliva Uc

   Research 24 April 2019 Pages: 447 - 451

   

10. Room temperature structural, dielectric, and conductivity properties of Al_xCd_1-xFe₂O₄ ferrites

    • Tuğba Şaşmaz Kuru

    OriginalPaper 22 April 2019 Pages: 453 - 460

    

11. High responsivity of ultraviolet sensor-based rutile-phased TiO₂ nanorod arrays using different bias voltage

    • S. M. Mokhtar
    • M. K. Ahmad
    • K. Murakami

    Research 02 May 2019 Pages: 461 - 468

    

12. Synthesis and characterization of spherical Yb₂SiO₅ powder using solid-state diffusional reaction and spray dry process

    • A. Abedi Nieai
    • M. Mohammadi
    • A. Hassani Arefi

    Research 04 May 2019 Pages: 469 - 476

    

13. In vitro studies of α-TCP and β-TCP produced from Clinocardium ciliatum seashells

    • Yesim Muge Sahin
    • Zeynep Orman
    • Sevil Yucel

    Research 16 August 2019 Pages: 477 - 488

    

14. Development of temmoku glazes and their applications onto different tiles under industrial fast firing conditions at 1180 °C

    • Keriman Pekkan
    • Eda Taşçı
    • Yalçın Gün

    Research 16 May 2019 Pages: 489 - 497

    

15. Effect of synthesis method on magnetic and dielectric properties of CuBO₂ delafossite oxide

    • Sornamol Traiphop
    • Prasit Thongbai
    • Teerasak Kamwanna

    Research 16 May 2019 Pages: 499 - 505

    

16. Synthesis of core/shell/shell Fe₃O₄/SiO₂/ZnO nanostructure composite material with cubic magnetic cores and study of the photo-degradation ability of methylene blue

    • Fardin Ghasemy-Piranloo
    • Fatemeh Bavarsiha
    • Masoud Rajabi

    Research 22 May 2019 Pages: 507 - 515

    

17. Modification of surfaces of alumina-zirconia porous ceramics with Sr²⁺ after SBF

    • André D. R. Silva
    • Eliria M. J. A. Pallone
    • Anderson O. Lobo

    Research 24 July 2019 Pages: 517 - 524

    

18. Investigation of wear resistance of the porcelain tile bodies by solid particle impingement using alumina particles

    • Tuna Aydin
    • Osman Bican
    • Recep Gümrük

    Research 19 May 2019 Pages: 525 - 531

    

19. Preparation and characterization of electrospun polylactic acid/sodium alginate/orange oyster shell composite nanofiber for biomedical application

    • Sumeyye Cesur
    • Faik Nuzhet Oktar
    • Oguzhan Gunduz

    Research 29 May 2019 Pages: 533 - 543

    

20. Effects of surface pretreatments and coating period on hydroxyapatite coating of Ti6Al4V alloy

    • T. Hacioglu
    • Z. Evis
    • M. K. Aydınol

    Research 11 June 2019 Pages: 545 - 557

    

21. The effect of milling conditions on the magnetic and topological properties of MgB₂ synthesized by high-energy ball mill and sintered at low temperature

    • H. Kurama
    • S. Erkuş

    Research 21 May 2019 Pages: 559 - 566

    

22. Synthesis and study bromophenol blue dye adsorption efficiency of reduced graphene oxide produced by catalytic acid spray (CAS) method

    • Mahmoud Fathy
    • Th. Abdel Moghny
    • Abeer A. Emam

    Research 14 November 2019 Pages: 567 - 577

    

23. Synergistic effects of zirconium and silver co-dopants in TiO₂ nanoparticles for photocatalytic degradation of an organic dye and antibacterial activity

    • Pornrat Sanitnon
    • Siriluk Chiarakorn
    • Thirawudh Pongprayoon

    Research 30 May 2019 Pages: 579 - 590

    

24. First-principles study on Sr-doped hydroxyapatite as a biocompatible filler for photo-cured dental composites

    • Kh. Moradi
    • A. A. Sabbagh Alvani

    Research 07 June 2019 Pages: 591 - 598

    

25. Combination between organic polymer and geopolymer for production of eco-friendly metakaolin composite

    • H. M. Khater
    • Abdeen El Naggar

    Research 31 May 2019 Pages: 599 - 608

    

26. The effect of granulated lead–zinc slag on aesthetic and microstructural properties of single-fired wall tile glazes

    • Zahide Bayer Ozturk
    • Keriman Pekkan
    • Suna Yilmaz

    Research 25 July 2019 Pages: 609 - 617

    

27. Effect of recoating slurry with different particle size on the properties of reticulated porous mullite ceramics

    • Yufan Wang
    • Daqian Hei
    • Shujing Li

    Research 29 May 2019 Pages: 619 - 629

    

28. Effect of metallic content on sintering behavior of NiFe₂O₄-based cermet inert anode for aluminum electrolysis

    • Zhigang Zhang
    • Xiaotong Lu
    • Hongjie Luo

    Research 08 June 2019 Pages: 631 - 638

    

29. Synthesis and photovoltaic application of ZnS:Cu (3%) nanoparticles

    • Benjamin Ayim-Otu
    • Melih Kuncan
    • Sabit Horoz

    Research 10 June 2019 Pages: 639 - 643

    

30. Hydrothermal synthesis and characterization of vanadium-doped titanium dioxide nanotubes

    • M. Türkay Aytekin Aydın
    • H. Levent Hoşgün

    Research 03 July 2019 Pages: 645 - 651

    

31. Hydroxyapatite incorporation into MCM-41 and study of ibuprofen drug release

    • Amirhosein Toozandeh Jani
    • Nahid Bolbol Haghighi
    • Sahar Molzemi

    Research 05 September 2019 Pages: 653 - 661

    

32. Preparation, characterisation and industrial evaluation of foamed fireclay

    • Samir B. Hanna
    • Noha A. Ajiba

    Research 05 July 2019 Pages: 663 - 681

    

33. Production and characterization of the halogen-free and nanostructured flame retardant reinforced composite coatings

    • Serdar Yildirim
    • Erdal Celik

    Research 02 July 2019 Pages: 683 - 695

    

34. Effect of selenium incorporation on the structure and in vitro bioactivity of 45S5 bioglass

    • Burcu Karakuzu-İkizler
    • Pınar Terzioğlu
    • Sevil Yücel

    Research 02 July 2019 Pages: 697 - 709

    

35. Structure and morphology of synthesized lanthanum hydroxide [La(OH)₃] nanocrystalline powders: study on fuel to oxidant ratio

    • V. Anslin Ferby
    • A. Moses Ezhil Raj
    • M. Bououdina

    Research 04 July 2019 Pages: 711 - 720

    

36. Surface roughness improvement of near net shaped alumina by EPD

    • Daniel Drdlik
    • Zdenek Chlup
    • Katarina Drdlikova

    Research 04 July 2019 Pages: 721 - 727

    

37. Phase, morphological, and magnetic properties of iron oxide nanoparticles extracted from mill scale waste and its surface modification with CTAB surfactant

    • Ismayadi Ismail
    • Abdul Halim Abdullah
    • Raba’ah Syahidah Azis

    Research 23 August 2019 Pages: 729 - 743

    

38. An environment-friendly fabrication of nano-Co₃O₄ coating by aqueous electrophoretic deposition

    • Daixiong Zhang
    • Qing Xiang
    • Xueming Li

    Research 24 July 2019 Pages: 745 - 749

    

39. High performance of hydroxylated BiFeO₃/polystyrene composite films with enhanced dielectric constant and low dielectric loss

    • Srikanta Moharana
    • Ram Naresh Mahaling

    Research 26 August 2019 Pages: 751 - 760

    

40. Electrophoretic deposition of bi-layered nano-sized silicon carbide/mullite coating from stabilized suspensions

    • Mohammad Jafarpour
    • Hossein Aghajani

    Research 12 September 2019 Pages: 761 - 770

    

41. Characterization of alumina crucible made from aluminum industrial waste

    • Watcharee Sornlar
    • Pattarawan Choeycharoen
    • Anucha Wannagon

    Research 14 August 2019 Pages: 771 - 779

    

42. Performance of high-volume fly ash concrete after exposure to elevated temperature

    • M. S. Khan
    • M. Shariq
    • A. Masood

    Research 14 August 2019 Pages: 781 - 794

    

43. Effect of Mg(OH)₂ and sintering temperature on the hydration resistance of CaO aggregate by thermal decomposition

    • Tao Zhang
    • Yaowu Wei
    • Nan Li

    Research 16 August 2019 Pages: 795 - 801