Online first articles

Articles not assigned to an issue 83 articles

1. The Velocity Variation Characteristics of the Flow Field and the Related Structural Parameter Optimization of the Direct Jet Nozzle

   Authors

   • Yansong Zhang
   • Cuicui Xu
   • Qingguo Yao

   • Content type: Research Paper
   • Published: 01 April 2021

   

2. Nonlinear Forced Vibration and Dynamic Buckling Analysis for Functionally Graded Cylindrical Shells with Variable Thickness Subjected to Mechanical Load

   Authors

   • K. V. Phu
   • D. H. Bich
   • L. X. Doan

   • Content type: Research Paper
   • Published: 24 March 2021

   

3. Condensation of Refrigerant in a Horizontal Circular Mini-Channel using HFO Refrigerant: A numerical study

   Authors

   • Tejendra Patel
   • A. D. Parekh

   • Content type: Research Paper
   • Published: 23 March 2021

   

4. Optimized Radius of Influence Domain in Meshless Approach for Modeling of Large Deformation Problems

   Authors

   • Abdelaziz Timesli

   • Content type: Technical Note
   • Published: 13 March 2021

   

5. Machinability Study of AA6061 Under Various Heat Treatment Conditions

   Authors (first, second and last of 4)

   • Yasser Zedan
   • Keyhan Jabbari
   • Victor Songmene

   • Content type: Research Paper
   • Published: 01 March 2021

   

6. Analysis of Overturn of High-Speed Train with Various Nose Shapes Under Crosswind

   Authors

   • Reza Ezoji
   • Mohammad Reza Talaee

   • Content type: Research Paper
   • Published: 01 March 2021

   

7. Analysis of Sloshing-Induced Stresses in the Baffles-Shell Joints in a Road Tanker Transporting LPG

   Authors (first, second and last of 4)

   • J. J. Hernández-Morales
   • E. Rodríguez-Morales
   • J. J. Montes-Rodríguez

   • Content type: Research Paper
   • Published: 08 February 2021

   

8. Nonlinear Multiple Degrees of Freedom Model for Tuned Liquid Damper

   Authors

   • Ahmad Salah Edeen Nassef
   • Abdelfattah Abdelhamid

   • Content type: Research Paper
   • Published: 01 February 2021

   

9. Analysis of the Screw Flight Wear Model and Wear Regularity of the Bulk Transport in Screw Ship Unloader

   Authors (first, second and last of 9)

   • Weijie Yang
   • Wenjun Meng
   • Xiaoxia Sun

   • Content type: Review Paper
   • Open Access
   • Published: 23 January 2021

   

10. Vibration Feature Evaluation of the Motor-Gear System with Gear Tooth Crack and Rotor Bar Error

    Authors (first, second and last of 5)

    • Wenyu Bai
    • Qiang Zeng
    • Guanjun Bao

    • Content type: Technical Note
    • Published: 22 January 2021

    

11. Metaheuristic Optimization of Rotating Multilayer Composite Tubes Under Internal Heating and Pressure

    Authors

    • Saeid Kazemzadeh Azad
    • Tolga Akış

    • Content type: Research Paper
    • Published: 21 January 2021

    

12. Reduction of Stress Variations on Sections (ROSVOS) for a Femoral Component

    Authors

    • Levent Uğur
    • Burak Ozturk
    • Fehmi Erzincanli

    • Content type: Research Paper
    • Published: 18 January 2021

    

13. Love Wave Propagation in Viscoelastic Layer Sandwiched Between Fiber-reinforced Layer and Consistent Couple Stress Substrate

    Authors

    • Shikha Deep
    • Vikas Sharma

    • Content type: Research Paper
    • Published: 11 January 2021

    

14. Free Vibration and Transmission Response Analysis for Torsional Vibration of Circular Annular Plate

    Authors

    • Wei Liu
    • HaiLong Sun
    • Qiang Zhao

    • Content type: Research Paper
    • Open Access
    • Published: 10 January 2021

    

15. Study on Noise Characteristics of Marine Centrifugal Pump Under Different Cavitation Stages

    Authors (first, second and last of 4)

    • Cui Dai
    • Zhipeng Ge
    • Jiancheng Zhu

    • Content type: Research Paper
    • Published: 06 January 2021

    

16. Simulation and Optimization of an Induced Charge Electrokinetic-Based Micromixer

    Authors

    • Niloofar Zare
    • Mohammad K. D. Manshadi
    • Reza Kamali

    • Content type: Research Paper
    • Published: 05 January 2021

    

17. Adaptive Attitude Stabilization of Flexible Spacecraft with Fast Fixed-Time Convergence

    Authors

    • Seyed Majid Esmaeilzadeh
    • Mehdi Golestani
    • Afef Fekih

    • Content type: Research Paper
    • Published: 05 January 2021

    

18. Improving both Strength and Ductility of Al-7075 by combining Dual Equal Channel Lateral Extrusion with Aging Heat Treatment

    Authors

    • Farid Biniyazan
    • Hamid Soleimanimehr

    • Content type: Research Paper
    • Published: 05 January 2021

    

19. Free Vibration Characteristics of Rotating Functionally Graded Porous Circular Cylindrical Shells with Different Boundary Conditions

    Authors (first, second and last of 4)

    • Xuan-Hung Dang
    • Van-Loi Nguyen
    • Bich-Phuong Nguyen Thi

    • Content type: Research Paper
    • Published: 28 November 2020

    

20. Variational Principle and Approximate Solution for the Fractal Vibration Equation in a Microgravity Space

    Authors

    • Kang-Jia Wang

    • Content type: Research Paper
    • Published: 24 November 2020

    

21. Application of Counter Rotating Rotors for Improving Performance of Savonius Turbines

    Authors (first, second and last of 4)

    • Vahid Etemadeasl
    • Rasool Esmaelnajad
    • Moharram Jafari

    • Content type: Research Paper
    • Published: 17 November 2020

    

22. A Linear Inchworm Piezomotor with a New Configuration: Design Considerations, Fabrication and Characterization

    Authors

    • Mohammad Sangchap
    • Mohammad Tahmasebipour
    • Younes Tahmasebipour

    • Content type: Research Paper
    • Published: 16 November 2020

    

23. Effect of Geometric and Operational Parameters on the Performance of a Beta-Type Stirling Engine: A Numerical Study

    Authors

    • H. Raghavendra
    • P. Suryanarayana Raju
    • K. Hemachandra Reddy

    • Content type: Review Paper
    • Published: 16 November 2020

    

24. A New Beam Element for Static, Free and Forced Vibration Responses of Microbeams Resting on Viscoelastic Foundation Based on Modified Couple Stress and Third-Order Beam Theories

    Authors

    • Reza Damghanian
    • Kamran Asemi
    • Masoud Babaei

    • Content type: Research Paper
    • Published: 11 November 2020

    

25. Numerical Simulation and Experimental Study on High-Pressure Water Jet Descaling in Coal Mine Drainage Pipeline

    Authors (first, second and last of 7)

    • Aiming Wang
    • Pengfei Sun
    • Xiaohan Cheng

    • Content type: Research Paper
    • Published: 10 November 2020

    

26. A Cross Integration for von-Mises Plasticity Along with Nonlinear Isotropic Hardening and Lemaitre Damage Model

    Authors

    • Maliheh Tavoosi
    • Mehrzad Sharifian
    • Mehrdad Sharifian

    • Content type: Research Paper
    • Published: 04 November 2020

    

27. An Experimental and Numerical Determination on Low-Velocity Impact Response of Hybrid Composite Laminate

    Authors (first, second and last of 4)

    • Engin Erbayrak
    • Ercument Ugur Yuncuoglu
    • Beril Eker Gumus

    • Content type: Research Paper
    • Published: 19 October 2020

    

28. Effect of Curing Cycle on Fatigue Life of Cracked AA7075-T6 Aircraft Sheet Repaired with a Boron/Epoxy Composite Patch

    Authors (first, second and last of 4)

    • Malika Khodja
    • Hamida Fekirini
    • Belabbes Bachir Bouiadjra

    • Content type: Research Paper
    • Published: 16 October 2020

    

29. A Three-Dimensional Conjugate Heat Transfer Model of a Turbocharger Turbine Housing

    Authors

    • Sh. Alaviyoun
    • M. Ziabasharhagh
    • A. Mohammadi

    • Content type: Research Paper
    • Published: 09 October 2020

    

30. Nonlinear Thermal Stress Analysis of Functionally Graded Thick Cylinders and Spheres

    Authors

    • Durmuş Yarimpabuç

    • Content type: Research Paper
    • Published: 08 October 2020

    

31. Configuration Design of Single-Loop Non-overconstrained Mechanism with Inactive Joints

    Authors (first, second and last of 5)

    • Jiali Liu
    • Yong Xu
    • Xinyang Jiang

    • Content type: Research Paper
    • Published: 07 October 2020

    

32. Determining Optimum Butt-Welding Parameters of 304 Stainless-Steel Plates Using Finite Element, Particle Swarm and Artificial Neural Network

    Authors

    • Masoud Mohammadi
    • Sa’id Golabi
    • Behzad Amirsalari

    • Content type: Research Paper
    • Published: 07 October 2020

    

33. Comfort-oriented Semi-active Matching Design with a Magneto-Rheological Air Suspension Mechanism

    Authors

    • Ran Ma
    • Cuong Minh Do

    • Content type: Research Paper
    • Published: 06 October 2020

    

34. Experimental Study of Steam Injection into a Water Stream for Milk Sterilization

    Authors

    • Ali Esmaeeli
    • Mohammad Passandideh-Fard

    • Content type: Research Paper
    • Published: 03 October 2020

    

35. Generalized Thermoelastic Waves Propagation in Non-uniform Rational B-spline Rods Under Quadratic Thermal Shock Loading Using Isogeometric Approach

    Authors

    • Ahmad Yavari
    • Mohammad Hossein Abolbashari

    • Content type: Research Paper
    • Published: 03 October 2020

    

36. Analysis of the Effect of Various Impeller Blade Angles on Characteristic of the Axial Pump with Pressure Fluctuations Based on Time- and Frequency-Domain Investigations

    Authors

    • Ahmed Ramadhan Al-Obaidi

    • Content type: Research Paper
    • Published: 28 September 2020

    

37. Large Amplitude Free Vibrations of FGM Beams on Nonlinear Elastic Foundation in Thermal Field Based on Neutral/Mid-plane Formulations

    Authors

    • Hadi Babaei
    • Yaser Kiani
    • Mohammad Reza Eslami

    • Content type: Research Paper
    • Published: 01 September 2020

    

38. Operational Cutting Force Identification in End Milling Using Inverse Technique to Predict the Fatigue Tool Life

    Authors

    • Ratan A. Patil
    • Shrinivas L. Gombi

    • Content type: Research Paper
    • Published: 29 August 2020

    

39. A New Approach to Estimate the Distribution of Solar Radiation Using Linke Turbidity Factor and Tilt Angle

    Authors

    • Foued Chabane
    • Noureddine Moummi
    • Abdelhafid Brima

    • Content type: Research Paper
    • Published: 09 August 2020

    

40. Experimental Performance of Desalination System Using Solar Concentrator, Nano-fluid, and Preheater Tube Accompanying Phase Change Material

    Authors (first, second and last of 4)

    • M. R. Assari
    • H. Basirat Tabrizi
    • Y. Cheshmeh Khavar

    • Content type: Research Paper
    • Published: 04 August 2020

    

41. Mechanical and Microstructural Characterization of Friction Stir-Welded AA2219: TiCp-Reinforced Composites

    Authors

    • J. Edwin Raja Dhas
    • Jenkins Hexley Dhas

    • Content type: Research Paper
    • Published: 13 July 2020

    

42. Effects of Post-ECAP Aging on Fatigue Crack Growth Resistance of 7075 Al Alloy

    Authors

    • S. M. Ghalehbandi
    • Alireza Fallahi
    • Hossein Hosseini-Toudeshki

    • Content type: Research Paper
    • Published: 08 July 2020

    

43. Failure Procedure in Epoxy Adhesive Joining Composite Plates

    Authors (first, second and last of 5)

    • Dara Fazel
    • Mohammad Hassan Kadivar
    • Mohammad Rahim Hematiyan

    • Content type: Research Paper
    • Published: 08 July 2020

    

44. Loosening and Strength Failure Calculation Models of Screwed Joints Under Complex Working Condition Loading

    Authors (first, second and last of 6)

    • Y. Mo
    • S. Guo
    • K. Zhan

    • Content type: Research Paper
    • Published: 02 July 2020

    

45. Heat Transfer Enhancement in a Double Pipe Heat Exchanger Using Different Fin Geometries in Turbulent Flow

    Authors

    • Osama A. Mohsen
    • Muhannad A. R. Muhammed
    • Basim O. Hasan

    • Content type: Research Paper
    • Published: 30 June 2020

    

46. Effects of Curved Ribs on Heat Transfer, Friction and Exergy Loss in Rectangular Cooling Channels by CFD

    Authors

    • Fifi N. M. Elwekeel
    • Antar M. M. Abdala
    • Qun Zheng

    • Content type: Research Paper
    • Published: 30 June 2020

    

47. Effects of a Non-uniform Magnetic Field-Dependent Viscosity on the Ferroconvective Flow in an Inclined U-Shaped Enclosure

    Authors

    • Sameh E. Ahmed
    • Z. A. S. Raizah

    • Content type: Research Paper
    • Published: 24 June 2020

    

48. Effect of Distributed Damping on the Dynamic Behavior of Flexible Chassis of Heavy Road Vehicle Under Standardized Random Road Responses

    Authors

    • Ashish Gupta
    • Vikas Rastogi

    • Content type: Research Paper
    • Published: 23 June 2020

    

49. Solidification of Cascaded PCM Storages Embedded Within a Channel Under Various Forced Air Flow Strategies

    Authors (first, second and last of 4)

    • Atta Sojoudi
    • Mojtaba Mohammadpour
    • Ali Salehpour

    • Content type: Research Paper
    • Published: 18 June 2020

    

50. A Novel of Low-Frequency Vibration Isolation with High-Static Low-Dynamic Stiffness Characteristic

    Authors (first, second and last of 6)

    • Jiayu Zheng
    • Xuefeng Yang
    • Luan Liu

    • Content type: Research Paper
    • Published: 13 June 2020