1. PIAM Editorial April 2023

   • Bianca Maria Colosimo

   Editorial 04 April 2023 Pages: 75 - 75

2. Case study of low-alloy steel material selection for the bodies of subsea valves: failure prevention approaches

   • Karan Sotoodeh

   Full Research Article 19 May 2022 Pages: 77 - 85

   

3. Surface roughness prediction of polylactic acid (PLA) products manufactured by 3D printing and post processed using a slurry impact technique: ANFIS-based modeling

   • Mahmoud Heshmat
   • Ibrahem Maher
   • Yasser Abdelrhman

   Full Research Article 28 June 2022 Pages: 87 - 98

   

4. Pressure and heat treatment of continuous fibre reinforced thermoplastics produced by fused filament fabrication

   • Michael Handwerker
   • Jörg Wellnitz
   • Ulrich Tetzlaff

   Full Research Article Open access 21 June 2022 Pages: 99 - 116

   

5. Effects of infill patterns on part performances and energy consumption in acrylonitrile butadiene styrene fused filament fabrication via industrial-grade machine

   • Leopoldo De Bernardez
   • Giampaolo Campana
   • Sebastián Matías Mur

   Full Research Article 18 June 2022 Pages: 117 - 129

   

6. Microstructural and machinability aspects of electron beam melted Ti–6Al–4V with different building orientations

   • U. C. Alves
   • A. Hassui
   • C. E. H. Ventura

   Full Research Article 21 June 2022 Pages: 131 - 141

   

7. Influence of process variables on mechanical properties and material weight of acrylic butadiene styrene parts produced by fused filament fabrication

   • Saty Dev
   • Rajeev Srivastava

   Full Research Article 01 July 2022 Pages: 143 - 158

   

8. Manufacturing oxide-dispersion-strengthened steels using the advanced directed energy deposition process of high-speed laser cladding

   • Markus B. Wilms
   • Norbert Pirch
   • Bilal Gökce

   Full Research Article Open access 28 June 2022 Pages: 159 - 167

   

9. Fabrication of functionally graded injection molds using friction stir molding process of AA5083/brass-laminated composite

   • Esraa S. Abdelall
   • Mohammed Hayajneh
   • Mohammed Almomani

   Full Research Article 29 June 2022 Pages: 169 - 177

   

10. Effect of particle flow direction in particle erosion of macro texturized polymer surfaces

    • Sinan Fidan
    • Tamer Sınmazçelik
    • Satılmış Ürgün

    Full Research Article 03 July 2022 Pages: 179 - 194

    

11. Multi-material fused filament fabrication: an expedited methodology to assess the affinity between different materials

    • P. Cunha
    • R. Teixeira
    • A. F. Silva

    Full Research Article 05 July 2022 Pages: 195 - 204

    

12. Comparative study of vibration signatures of FDM 3D printers

    • Roshan Mishra
    • William Benjamin Powers
    • Kunal Kate

    Short Communication 20 July 2022 Pages: 205 - 209

    

13. A new method to select optimal part building orientation for additive manufacturing processes based on geometric complexity and heat shrinkage

    • Sabrine Ben Amor
    • Floriane Zongo
    • Antoine Tahan

    Full Research Article 20 July 2022 Pages: 211 - 222

    

14. Abrasive and non-conventional post-processing techniques to improve surface finish of additively manufactured metals: a review

    • Déborah De Oliveira
    • Milla Caroline Gomes
    • Nguyen Wayne Hung

    Review Article 21 July 2022 Pages: 223 - 240

    

15. On pre and post-processing of 3D printed ABS thermoplastic sacrificial pattern for strategic dog teeth

    • Smruti Ranjan Pradhan
    • Rupinder Singh
    • Arun Anand

    Full Research Article 20 July 2022 Pages: 241 - 253

    

16. Experimental bending fatigue data of additive-manufactured PLA biomaterial fabricated by different 3D printing parameters

    • Ali Dadashi
    • Mohammad Azadi

    Short Communication 18 July 2022 Pages: 255 - 263

    

17. Review on volumetric energy density: influence on morphology and mechanical properties of Ti6Al4V manufactured via laser powder bed fusion

    • Minhalina Ahmad Buhairi
    • Farhana Mohd Foudzi
    • M S H Al-Furjan

    Review Article Open access 30 July 2022 Pages: 265 - 283

    

18. Polymer/calcium phosphate biocomposites manufactured by selective laser sintering: an overview

    • Henrique Schappo
    • Karine Giry
    • Dachamir Hotza

    Review Article 20 August 2022 Pages: 285 - 301

    

19. The mechanical performance of functionally graded Schwarz primitive and Schoen-IWP cellular structures fabricated by additive manufacturing

    • Ibrahim M. Hassan
    • Tawakol A. Enab
    • Ibrahim Eldesouky

    Full Research Article 21 August 2022 Pages: 303 - 311

    

20. A novel heat treatment of the additively manufactured Co28Cr6Mo biomedical alloy and its effects on hardness, microstructure and sliding wear behavior

    • Lavinia Tonelli
    • Mohamed M. Z. Ahmed
    • Lorella Ceschini

    Full Research Article Open access 24 August 2022 Pages: 313 - 329

    

21. Additive manufacturing by digital light processing: a review

    • Rajat Chaudhary
    • Paride Fabbri
    • Carlo Antonini

    Review Article Open access 25 August 2022 Pages: 331 - 351