1. Precise filling time calculation of thin-walled investment casting in hot mold

   • Soumyajit Roy
   • Akshay Kumar Pramanick
   • Prasanta Kumar Datta

   Technical Paper 01 October 2020 Article: 552

   

2. Effect of process parameters on bead geometry, tensile and microstructural properties of double-sided butt submerged arc welding of SS 304 austenitic stainless steel

   • P. V. S. S. Sridhar
   • Pankaj Biswas
   • Pinakeswar Mahanta

   Technical Paper 29 September 2020 Article: 551

   

3. Kriging-based multiobjective optimization using sequential reduction of the entropy of the predicted Pareto front

   • A. G. Passos
   • M. A. Luersen

   Technical Paper 29 September 2020 Article: 550

   

4. Thermal investigation and flow pattern analysis of a closed-loop pulsating heat pipe with binary mixtures

   • Burak Markal
   • Ramazan Varol

   Technical Paper 28 September 2020 Article: 549

   

5. Cross-section modeling of the non-uniform corrosion due to chloride ingress using the positional finite element method

   • Éverton Souza Ramos
   • Rogério Carrazedo

   Technical Paper 26 September 2020 Article: 548

   

6. Simulating squirmers with volumetric solvers

   • Stevens Paz
   • Gustavo C. Buscaglia

   Technical Paper 25 September 2020 Article: 547

   

7. Selection of best process parameters for friction stir welded dissimilar Al-Cu alloy: a novel MCDM amalgamated MORSM approach

   • Tanmoy Medhi
   • Syed Abou Iltaf Hussain
   • Subhash Chandra Saha

   Technical Paper 25 September 2020 Article: 546

   

8. An integration method of design and machining for spiral bevel gears based on universal CNC machine tools

   • Jubo Li
   • Zhenshan Gao
   • Wensuo Ma

   Technical Paper 25 September 2020 Article: 545

   

9. Experimental and numerical analysis of the residual stress distribution in a three-point bending test of a TRIP sheet by using ESPI

   • Alan E. Díaz-Mendoza
   • Gustavo Capilla-González
   • Ismael Ruíz-López

   Technical Paper 25 September 2020 Article: 544

   

10. A new three-node element for bending, free vibration and buckling analysis of composite laminated beams based on FSDT theory

    • Mohammad Karkon

    Technical Paper 25 September 2020 Article: 543

    

11. Investigations on morphology and material removal rate of various MMCs using CO₂ laser technique

    • Vikas Sharma
    • Vinod Kumar
    • Ashish Bist

    Technical Paper 24 September 2020 Article: 542

    

12. Experimental study on forming of nanoclay-reinforced metal–composite laminates using deep drawing process

    • Farzad Boroumad
    • S. M. Hossein Seyedkashi
    • M. Hossein Pol

    Technical Paper 24 September 2020 Article: 541

    

13. Buckling analysis of rectangular sandwich plates with functionally graded graphene-reinforced face layers

    • M. Shakouri
    • A. Mohseni

    Technical Paper 24 September 2020 Article: 540

    

14. On the upscaling approach to wind tunnel experiments of horizontal axis hydrokinetic turbines

    • Marianela M. Macias
    • Rafael C. F. Mendes
    • Antonio C. P. Brasil Jr.

    Technical Paper 24 September 2020 Article: 539

    

15. Investigation on friction stud welded AMC/AISI 304 steel joints with ceramic intercoating

    • R. Tharmaraj
    • N. Rajesh Jesudoss Hynes
    • P. Shenbaga Velu

    Technical Paper 24 September 2020 Article: 538

    

16. Experimental investigation on mechanical behaviors of Q345B steel material over wide ranges of strain rates and temperatures

    • Tao Jiang
    • Chong Ji
    • Kun Zhang

    Technical Paper 24 September 2020 Article: 537

    

17. Influence of geometric discontinuities and geometric/microstructural defects on the temperature-dependent vibration response of functionally graded plates on elastic foundation

    • Gaurav Bansal
    • Ankit Gupta
    • Varun Katiyar

    Technical Paper 24 September 2020 Article: 536

    

18. Experimental investigation of a trench weir with T-shaped bars

    • Swati Bhave
    • Sanjeev Kumar
    • Zulfequar Ahmad

    Technical Paper 23 September 2020 Article: 535

    

19. Experimental and numerical study on warm single-point incremental sheet forming (WSPIF) of titanium alloy Ti–6Al–4V, using cartridge heaters

    • Badreddine Saidi
    • Laurence Giraud Moreau
    • Rachid Nasri

    Review 23 September 2020 Article: 534

    

20. Finite element modeling and optimization of hybrid laser–TIG welding of type 316L(N) austenitic stainless steel

    • N. Chandrasekhar
    • M. Ragavendran
    • M. Vasudevan

    Technical Paper 23 September 2020 Article: 533

    

21. Experimental and numerical studies on gas tungsten arc welding of Ti–6Al–4V tailor-welded blank

    • A. Karpagaraj
    • N. Rajesh Kumar
    • R. Sarala

    Technical Paper 22 September 2020 Article: 532

    

22. Comparative assessment of biogas and producer gas with diesel in a twin cylinder dual-fuel diesel engine

    • Chandrakanta Nayak
    • Bibhuti B. Sahoo

    Technical Paper 21 September 2020 Article: 531

    

23. Nonlinear transient analysis of rigid rotor mounted on externally pressurized double-layered porous gas journal bearings accounting velocity slip

    • Phani Kumar Mallisetty
    • P. Samanta
    • N. C. Murmu

    Technical Paper 19 September 2020 Article: 530

    

24. Enabling high conductance and high energy density in supercritical fluids for thermal storage applications

    • Gustavo M. Hobold
    • Alexandre K. da Silva

    Technical Paper 18 September 2020 Article: 529

    

25. Improving efficiency of Savonius wind turbine by means of an airfoil-shaped deflector

    • Keyhan Layeghmand
    • Nima Ghiasi Tabari
    • Mehran Zarkesh

    Technical Paper 18 September 2020 Article: 528

    

26. Accuracy analysis of different Laplacian models of incompressible SPH method improved by using Voronoi diagram

    • Gholamreza Shobeyri

    Technical Paper 18 September 2020 Article: 527

    

27. Dynamics of rising bubbles in initially quiescent liquids that are later on disturbed by falling drops

    • Rajesh Nimmagadda

    Technical Paper 17 September 2020 Article: 526

    

28. Enhancing the tensile properties with minimal mass variation by revealing the effects of parameters in fused filament fabrication process

    • Volkan Korkut
    • Hakan Yavuz

    Technical Paper 17 September 2020 Article: 525

    

29. A comparative study on utilizing hybrid-type nanofluid in plate heat exchangers with different number of plates

    • Emine Yağız Gürbüz
    • Adnan Sözen
    • Azim Doğuş Tuncer

    Technical Paper 17 September 2020 Article: 524

    

30. Multi-objective genetic algorithm optimization of composite sandwich plates using a higher-order theory

    • Mohammad Mahdi Kheirikhah

    Technical Paper 16 September 2020 Article: 523

    

31. Characterization and numerical evaluation of flow and blood damage in a pulsatile left ventricular assist device

    • Amir Hossein Vakilzadeh
    • Kourosh Javaherdeh

    Technical Paper 15 September 2020 Article: 522

    

32. Wave scattering from discontinuities related to corrosion-like damage in one-dimensional waveguides

    • Breno E. Takiuti
    • Elisabetta Manconi
    • Vicente Lopes Jr

    Technical Paper 15 September 2020 Article: 521

    

33. A bistable electromagnetic energy harvester for low-frequency, low-amplitude excitation

    • Mohammed Ali Abdelnaby
    • Mustafa Arafa

    Technical Paper 15 September 2020 Article: 520

    

34. Effect of graphene nanoplatelet reinforcements on the dynamics of rotating truncated conical shells

    • Hassan Afshari

    Technical Paper 15 September 2020 Article: 519

    

35. Computational studies of comparative and cumulative effects of turbulence, fluid–structure interactions, and uniform magnetic fields on pulsatile non-Newtonian flow in a patient-specific carotid artery

    • Jafar Moradicheghamahi
    • Mehdi Jahangiri
    • Mahmood Reza Sadeghi

    Technical Paper 15 September 2020 Article: 518

    

36. Effect of coated and treated electrodes on Micro-EDM characteristics of Ti-6Al-4V

    • R. Naveen Anthuvan
    • V. Krishnaraj

    Technical Paper 14 September 2020 Article: 517

    

37. Numerical and experimental investigation of the dynamic behavior of a cantilever beam driven by two non-ideal sources

    • Marcus Varanis
    • Arthur Mereles
    • Carlos Alberto Bavastri

    Technical Paper 14 September 2020 Article: 516

    

38. Performance assessment of a square cyclone influenced by inlet section modifications

    • Ebrahim Hosseini

    Technical Paper 12 September 2020 Article: 515

    

39. Analytical investigation on free torsional vibrations of noncircular nanorods

    • Farshad Khosravi
    • Seyed Amirhosein Hosseini
    • Babak Alizadeh Hamidi

    Technical Paper 12 September 2020 Article: 514

    

40. Impedance control as an optimal control problem: a novel formulation of impedance controllers as a subcase of optimal control

    • Guilherme Phillips Furtado
    • Pedro Parik Americano
    • Arturo Forner-Cordero

    Technical Paper 11 September 2020 Article: 513

    

41. Machining performance enhancement of powder mixed electric discharge machining using Green dielectric fluid

    • Rajesh Bajaj
    • Amit Rai Dixit
    • Arun Kumar Tiwari

    Technical Paper 11 September 2020 Article: 512

    

42. On the robustness of a model-based inverse force identification applied on a structure submerged in different media

    • Ricardo P. Álvarez-Briceño
    • Frank Naets
    • Leopoldo P. R. de Oliveira

    Technical Paper 11 September 2020 Article: 511

    

43. A theoretical analysis on crush characteristics of corrugated tube under axial impact and experimental verification

    • Benyuan Fu
    • Changrong Liao
    • Ruizhi Shu

    Technical Paper 11 September 2020 Article: 510

    

44. Design optimization of hydrodynamic coupling applying response surface method combined with CFD technique

    • Jafar Nejadali

    Technical Paper 11 September 2020 Article: 509

    

45. A critical review of modelling methods for flexible and rigid link manipulators

    • T. S. Lee
    • Esmail Ali Alandoli

    Review 11 September 2020 Article: 508

    

46. Semi-empirical model for depth of cut in abrasive waterjet machining of metal matrix composites

    • V. Mohankumar
    • M. Kanthababu

    Technical Paper 10 September 2020 Article: 507

    

47. Experimental study on drilling micro-hole through micro-EDM and optimization of multiple performance characteristics

    • Amit Kumar Singh
    • Promod Kumar Patowari
    • M. Chandrasekaran

    Technical Paper 09 September 2020 Article: 506

    

48. Observer-based adaptive fractional-order control of flexible-joint robots using the Fourier series expansion: theory and experiment

    • Payam Kheirkhahan
    • Alireza Izadbakhsh

    Technical Paper 09 September 2020 Article: 505

    

49. Analysis of forced and free vibrations of composite porous core sandwich cylindrical shells and FG-CNTs reinforced face sheets resting on visco-Pasternak foundation under uniform thermal field

    • Farhad Kiani
    • Maboud Hekmatifar
    • Davood Toghraie

    Technical Paper 09 September 2020 Article: 504

    

50. On the machinability of the Ni-30 high-temperature iron-based superalloy

    • Armando Ítalo Sette Antonialli
    • Marta Regina Delle Donne Carvalho
    • Anselmo Eduardo Diniz

    Technical Paper 09 September 2020 Article: 503