Online first articles
Articles not assigned to an issue 259 articles
-
-
Suitability of Alternate Materials for Granular Pile Based on FEM Analysis
Authors
- Bhaskar Pradhan
- Suresh Kumar Tiwari
- Content type: ORIGINAL CONTRIBUTION
- Published: 07 December 2023
-
Biosorption of Chromium and Lead from Electroplating Industry Effluent Using Modified Cane Bagasse
Authors
- Bangaraiah Pagala
- Content type: ORIGINAL CONTRIBUTION
- Published: 03 December 2023
-
Fatigue Behaviour of HVOF-Sprayed WC–Co–VC and Cr3C2–NiCr–VC Coatings on AISI 4340 Steel
Authors (first, second and last of 6)
- G. Padmavathi
- B. N. Sarada
- P. Sampathkumaran
- Content type: ORIGINAL CONTRIBUTION
- Published: 03 December 2023
-
Sensitivity Analysis of Excavation Support Systems Using Numerical Modelling
Authors (first, second and last of 5)
- Koruprolu Mani Ganesh
- Arunava Ray
- Ashok Jaiswal
- Content type: ORIGINAL CONTRIBUTION
- Published: 30 November 2023
-
An Investigation on Mechanical and Sliding Wear Properties of Titanium Oxide-Basalt Fiber-Based Hybrid PLA Composites Using Gray-Taguchi Approach
Authors (first, second and last of 6)
- Sandeep Kumar
- Brijesh Gangil
- Manoj Kumar Gupta
- Content type: ORIGINAL CONTRIBUTION
- Published: 29 November 2023
-
CanDetEnsemble: A Model for Determining and Forecasting Lung Cancer in Humans by Exploiting Various Machine Learning Algorithms
Authors
- Amit Singh
- Rakesh Kumar Dwivedi
- Rajul Rastogi
- Content type: ORIGINAL CONTRIBUTION
- Published: 29 November 2023
-
Performance Assessment of Different Pin Profiles in Friction Stir Welding of AA2014 Aluminum Alloy: A Microstructural and Mechanical Analysis
Authors
- P. Sasikala
- R. Madhusudhan
- Content type: ORIGINAL CONTRIBUTION
- Published: 28 November 2023
-
Predicting the Mechanical Characteristics of Friction Surfaced Aluminium Deposition Using RSM, ANN and PSO Optimization: A Comparative Evaluation
Authors (first, second and last of 4)
- Dillip Kumar Sahoo
- Nassion Neupane
- Bachina Harish Babu
- Content type: ORIGINAL CONTRIBUTION
- Published: 28 November 2023
-
Experimental and Regression Analysis on Impact Behaviour of the Thermally Aged Wollastonite Filled E-glass Fibre Reinforced Epoxy Composite
Authors (first, second and last of 6)
- K. S. Lokesh
- D. Shrinivasa Mayya
- B. M. Raghavendra
- Content type: ORIGINAL CONTRIBUTION
- Published: 27 November 2023
-
Impact of Post-processing Techniques on the Wear Resistance of Plasma Beam Treatment on SS316L Components
Authors (first, second and last of 6)
- V. Srinivasa Chari
- Suyog Jhavar
- Bharath Kumar Shanmugam
- Content type: ORIGINAL CONTRIBUTION
- Published: 26 November 2023
-
Thermal Buckling, Vibration and Damping Behavior of Viscoelastic-FGM Sandwich Doubly Curved Panels
Authors (first, second and last of 5)
- Nishant Kumar Sahu
- Deepak Kumar Biswal
- Sukesh Chandra Mohanty
- Content type: ORIGINAL CONTRIBUTION
- Published: 25 November 2023
-
Mechanical Property Analysis into the Welded Plates of Al-6061 Joined by TIG and FSW Techniques
Authors (first, second and last of 6)
- Saurabh Dewangan
- Aaluri Praveen Reddy
- Uday Kumar
- Content type: ORIGINAL CONTRIBUTION
- Published: 22 November 2023
-
Investigation on Sliding Wear Properties of Nano Metallic Particle Reinforced Hybrid Composites Through Design of Experiments and ANN
Authors (first, second and last of 4)
- G. S. Divya
- R. Keshavamurthy
- K. V. Shivananda Murthy
- Content type: ORIGINAL CONTRIBUTION
- Published: 20 November 2023
-
Effect of CNC End Milling Parameters on Cu–Al–Mn Ternary Shape Memory Alloys Using Taguchi Method
Authors (first, second and last of 6)
- N. Praveen
- U. S. Mallik
- Shanthala Kollur
- Content type: ORIGINAL CONTRIBUTION
- Published: 20 November 2023
-
Investigation into the Feasibility of Welded Joint Between AISI 1020 and Inconel-718 Based on Mechanical Properties and Microstructural Attributes
Authors (first, second and last of 5)
- Saurabh Dewangan
- Salian Sagar Shyam Sunder
- Aaluri Praveen Reddy
- Content type: ORIGINAL CONTRIBUTION
- Published: 11 November 2023
-
An Optimization Study of Cooling Rate of a Laboratory Scale ROT Based on Experimental Results
Authors
- Prabir Biswas
- Pranibesh Mandal
- Content type: CASE STUDY
- Published: 09 November 2023
-
Evaluation of Mechanical and Tribological Characteristics of ZrB2-Based Ultra-High-Temperature Ceramics (UHTC)
Authors
- Sandeep Kumar
- Abhishek Singh
- Content type: ORIGINAL CONTRIBUTION
- Published: 07 November 2023
-
Preparation and Characterization Techniques of High-Density Polyethylene (HDPE) Reinforced with Multi-walled Carbon Nanotube (MWCNT) Nano-composites—A Review
Authors
- K. Suhas
- B. R. N. Murthy
- Content type: REVIEW PAPER
- Published: 06 November 2023
-
Cost-Optimal Preventive Maintenance and Parts Replacement Schedule Using Mixed Integer Linear Programming
Authors
- Tapan Dey
- Gopinath Samanta
- Suranjan Sinha
- Content type: ORIGINAL CONTRIBUTION
- Published: 05 November 2023
-
Modeling of White Layer Thickness During EDM of AISI 4340 Using Cu–W tool
Authors
- Syed Asghar Husain Rizvi
- Sanjay Agarwal
- Shavej Ali Siddiqui
- Content type: ORIGINAL CONTRIBUTION
- Published: 01 November 2023
-
Application of BOF Steelmaking Slag as a Partial Replacement of Agricultural Fertilizer
Authors
- Indrajit Ghanta
- Chanchal Biswas
- Projjal Basu
- Content type: ORIGINAL CONTRIBUTION
- Published: 28 October 2023
-
Influence of Nano-Al2O3-Mg-SiC on SS316L Perforated Clad Plate: Microstructure and Interfacial Study
Authors
- Ayush Trivedi
- Vijay Kumar Dwivedi
- Mayank Agarwal
- Content type: ORIGINAL CONTRIBUTION
- Published: 28 October 2023
-
Improvement in Mechanical Properties of Austenitic-Martensitic Stainless Steel for Investment Castings
Authors (first, second and last of 5)
- Arun Dwivedi
- Rohit Kumar Gupta
- Govind
- Content type: ORIGINAL CONTRIBUTION
- Published: 27 October 2023
-
Corrosion Behaviour of Borohydride Reduced Ni–B, Ni–B–W, Ni–B–Mo, Ni–B–W–Mo Coatings with Varying Composition: A Comparison
Authors
- Manik Barman
- Tapan Kumar Barman
- Prasanta Sahoo
- Content type: ORIGINAL CONTRIBUTION
- Published: 27 October 2023
-
Exploring the Metallurgical and Mechanical Characteristics of Magnesium/Silicon Carbide Surface Composites Manufactured via Friction Stir Processing
Authors (first, second and last of 4)
- T. A. Selvan
- K. Velusamy
- P. Arivalagan
- Content type: ORIGINAL CONTRIBUTION
- Published: 26 October 2023
-
Analysis of Corrosion Rate of Nanohybrid AA 6351/SiC/ZrO2 Composites by Tafel Extrapolation Technique
Authors
- T. SarithNaidu
- K. VenkataSubbaiah
- Content type: ORIGINAL CONTRIBUTION
- Published: 26 October 2023
-
Multi-Objective Optimization of Turning for Nickel-Based Alloys Using Taguchi-GRA and TOPSIS Approaches
Authors (first, second and last of 5)
- P. Mastan Rao
- Ch. Deva Raj
- J. Ranga Raya Chowdary
- Content type: ORIGINAL CONTRIBUTION
- Published: 26 October 2023
-
Mapping the Landscape of In-Situ Continuous Reinforcement in FFF Using a Single Nozzle: A Bibliometric Analysis
Authors
- Jaydeep R. Shah
- Shashank Thanki
- Content type: REVIEW PAPER
- Published: 23 October 2023
-
Effect of Split and Re-Entrant Type Piston Bowl Geometry and Preheated Calophyllum Inophyllum Methyl Ester on the Conventional CI Engine Performance
Authors (first, second and last of 5)
- A. N. Mohan Das
- M. R. Haseebuddin
- S. Chethan
- Content type: ORIGINAL CONTRIBUTION
- Published: 23 October 2023
-
Experimental Analysis of the Rice Husk and Eggshell Powder-Based Natural Fibre Composite
Authors (first, second and last of 10)
- K. S. Lokesh
- K. Shashank Kumar
- Bharath Kumar Shanmugam
- Content type: ORIGINAL CONTRIBUTION
- Published: 20 October 2023
-
Effect of Aging Temperature on Microstructure, Hardness and Thermal Property of AA7085 Alloy
Authors (first, second and last of 4)
- A. G. Shivasiddaramaiah
- L. Shivaramu
- R. Suresh
- Content type: ORIGINAL CONTRIBUTION
- Published: 19 October 2023
-
Characterization of Microstructure and Mechanical Behaviour in Activated Tungsten Inert Gas Welded Dissimilar AA Joint of AA 5083 and AA 6061 Alloys
Authors (first, second and last of 4)
- Sundar VettumPerumal
- VijayAnanth Suyamburajan
- Leema Nelson
- Content type: ORIGINAL CONTRIBUTION
- Published: 17 October 2023
-
Phosphorylation of Alkaline Lignin in Methanesulfonic Acid Solvent and the Use thereof as Flame Retardant of Epoxy
Authors
- Benni Ramadhoni
- Annisa Rifathin
- Frita Yuliati
- Content type: ORIGINAL CONTRIBUTION
- Published: 17 October 2023
-
Evaluation of Elastic Properties of CNT/GNP/Epoxy Hybrid Nanocomposite for Different Weight Fractions of CNT and GNP
Authors (first, second and last of 6)
- Niharika Dev Choudhury
- Pinku Saikia
- Satadru Kashyap
- Content type: ORIGINAL CONTRIBUTION
- Published: 16 October 2023
-
Experimental Investigation and Weibull Statistical Analysis on Tensile Behaviour of Carbon/Epoxy Composites
Authors
- Thakur Abhinav Amar
- Amit Kumar
- D. K. Yadav
- Content type: ORIGINAL CONTRIBUTION
- Published: 14 October 2023
-
Exploring the Mechanical and Thermal Properties of Novel Abaca/Aramid Hybrid Composite with CaCO3 Filler
Authors (first, second and last of 4)
- Aluru V. Siva Charana Datta
- G. Sudarshan
- Hariharan Sankarasubramanian
- Content type: ORIGINAL CONTRIBUTION
- Published: 13 October 2023
-
Design, Development, and Performance Evaluation of a Lightweight Short Shifter for Enhanced Gear-Shifting Quality in Automobile
Authors
- Lukas Kartanas
- Jayesh Shanthi Bhavan
- Content type: ORIGINAL CONTRIBUTION
- Published: 11 October 2023
-
Optimization of Friction Stir Welding Parameters to Enhance Weld Nugget Hardness in AA6061-B4C Composite Material
Authors (first, second and last of 4)
- C. Manjunatha
- T. N. Sreenivasa
- C. Durga Prasad
- Content type: ORIGINAL CONTRIBUTION
- Published: 10 October 2023
-
Effect of Bamboo Leaf and Pista Shell Powder Particles on Mechanical and Wear Behaviour of Polymer Composites
Authors (first, second and last of 6)
- G. Vyshnava Kumar
- Gadudasu Babu Rao
- G. Joy Calvin
- Content type: ORIGINAL CONTRIBUTION
- Published: 09 October 2023
-
Bandgap Prediction of Hybrid Organic–Inorganic Perovskite Solar Cell Using Machine Learning
Authors (first, second and last of 5)
- Debmalya Sadhu
- Debasis De
- Subir Gupta
- Content type: ORIGINAL CONTRIBUTION
- Published: 06 October 2023
-
Investigations into Impact Behavior of 3D Printed Nylon Short Carbon Fiber Composite
Authors
- Pradeep Kumar Mishra
- Siddhesh Salve
- T. Jagadesh
- Content type: ORIGINAL CONTRIBUTION
- Published: 05 October 2023
-
Through Thickness Stress Analysis of GNP/Epoxy Nanocomposites with Low Graphene Content
Authors (first, second and last of 4)
- Chinmoi Agni Borah
- Sushen Kirtania
- Satadru Kashyap
- Content type: ORIGINAL CONTRIBUTION
- Published: 04 October 2023
-
A Comparative Study on Effect of Welding Process on Microstructures and Mechanical Properties of Super Duplex Stainless Steels
Authors (first, second and last of 4)
- J. Jagadish
- B. Lakshmi Saranya
- K. Srinivasa Rao
- Content type: ORIGINAL CONTRIBUTION
- Published: 30 September 2023
-
Utilization of Solid Plant Wastes as Composite Briquettes for Use in Blast Furnace
Authors (first, second and last of 4)
- Rinku Dey
- Souvik Banerjee
- Arghya Majumder
- Content type: ORIGINAL CONTRIBUTION
- Published: 26 September 2023
-
Influence of Laser Power on Microstructure and Wear Behavior of Additively Manufactured AlSi10Mg Alloy
Authors
- Sunil Patidar
- Srinibash Mishra
- Mohammad Ashiq
- Content type: ORIGINAL CONTRIBUTION
- Published: 22 September 2023
-
Effect of Heat Treatments on Tensile Fracture Behaviour of Ti-6Al-4V Alloy Friction Welds
Authors (first, second and last of 5)
- K. Sri Ram Vikas
- Rahul
- K. Srinivasa Rao
- Content type: ORIGINAL CONTRIBUTION
- Published: 20 September 2023
-
Synthesis and Characterization of Al356–ZrO2–SiC Hybrid Composites
Authors (first, second and last of 4)
- S. L. Vijay Kumar
- K V Sreenivas Rao
- S. Udayashankar
- Content type: ORIGINAL CONTRIBUTION
- Published: 19 September 2023
-
Development of Magnesium Alloys and Composite Through Flux and Fluxless Liquid Metallurgy Procedures
Authors
- Mayur Kumar Rajak
- D. P. Mondal
- Yashwant Mehta
- Content type: ORIGINAL CONTRIBUTION
- Published: 17 September 2023
-
An Investigation into the Mechanical Properties of an Epoxy-Based Composite Made From Jute Fiber and Reinforced With Sal Tree Gum Powder
Authors (first, second and last of 6)
- Pavankumar R. Sonawane
- Deepak M. Deshmukh
- R. R. Arakerimath
- Content type: ORIGINAL CONTRIBUTION
- Published: 17 September 2023
For authors
Submit manuscriptWorking on a manuscript?
Avoid the most common mistakes and prepare your manuscript for journal editors.
Learn more