1. Dynamics of the guideway system founded on casting compound

   • Bartosz Powałka
   • Tomasz Okulik

   ORIGINAL ARTICLE Open access 30 June 2011 Pages: 1 - 7

2. Drilling performance of green austempered ductile iron (ADI) grade produced by novel manufacturing technology

   • Anil Meena
   • M. El Mansori

   ORIGINAL ARTICLE 07 July 2011 Pages: 9 - 19

3. Geometry of chip formation in circular end milling

   • Avisekh Banerjee
   • Hsi-Yung Feng
   • Evgueni V. Bordatchev

   ORIGINAL ARTICLE 28 June 2011 Pages: 21 - 35

4. An analytical expression for end milling forces and tool deflection using Fourier series

   • Shi Hyoung Ryu

   ORIGINAL ARTICLE 01 July 2011 Pages: 37 - 46

5. Selecting a milling strategy with regard to the machine tool capabilities: application to plunge milling

   • Matthieu Rauch
   • Jean-Yves Hascoet

   ORIGINAL ARTICLE 10 July 2011 Pages: 47 - 54

6. Methodology for evaluating effects of material characteristics on machinability—theory and statistics-based modelling applied on Alloy 718

   • Stefan Olovsjö
   • Peter Hammersberg
   • Lars Nyborg

   ORIGINAL ARTICLE 13 July 2011 Pages: 55 - 66

7. Effect of vibration on surface and tool wear in ultrasonic vibration-assisted scratching of brittle materials

   • Y. Peng
   • Z. Liang
   • C. Wang

   ORIGINAL ARTICLE 29 June 2011 Pages: 67 - 72

8. Tool condition monitoring based on numerous signal features

   • Krzysztof Jemielniak
   • Tomasz Urbański
   • Sebastian Bombiński

   ORIGINAL ARTICLE Open access 22 July 2011 Pages: 73 - 81

9. Contact length estimation in grinding using thermocouple measurement and numerical simulation

   • Iñigo Pombo
   • José Antonio Sánchez
   • Soraya Plaza

   ORIGINAL ARTICLE 07 July 2011 Pages: 83 - 91

10. Experimental investigation of surface quality for minimum quantity oil–water lubrication grinding

    • Cong Mao
    • Xiaojun Tang
    • Wangwu Yin

    ORIGINAL ARTICLE 07 July 2011 Pages: 93 - 100

11. Experimental investigation of new manufacturing process chains to create micro-metal structures on polymer substrates for lab-on-chip sensors

    • Matteo Calaon
    • Aminul Islam
    • Christian Ravn

    ORIGINAL ARTICLE 29 June 2011 Pages: 101 - 109

12. Advantages of carbon nanotubes in electrical discharge machining

    • C. Mai
    • Hong Hocheng
    • S. Huang

    ORIGINAL ARTICLE 23 June 2011 Pages: 111 - 117

13. Assessment of machining performance using the wear map approach in micro-drilling

    • Muhammad Imran
    • Paul T. Mativenga
    • Philip J. Withers

    ORIGINAL ARTICLE 19 August 2011 Pages: 119 - 126

14. Influence of dielectric and machining parameters on the process performance for electric discharge milling of SiC ceramic

    • Renjie Ji
    • Yonghong Liu
    • Xiaopeng Li

    ORIGINAL ARTICLE 28 July 2011 Pages: 127 - 136

15. An innovative method to build support structures with a pulsed laser in the selective laser melting process

    • Jamasp Jhabvala
    • Eric Boillat
    • Rémy Glardon

    Original Article 07 July 2011 Pages: 137 - 142

16. A comparative study on the processing parameters during fibre and CO₂ laser surface treatments of silicon nitride engineering ceramic

    • Pratik P. Shukla
    • Jonathan Lawrence

    ORIGINAL ARTICLE 07 July 2011 Pages: 143 - 155

17. Non-lithographic fabrication of metallic micromold masters by laser machining and welding

    • Pun-Pang Shiu
    • George K. Knopf
    • Suwas Nikumb

    ORIGINAL ARTICLE 07 July 2011 Pages: 157 - 167

18. Application of the central composite design in optimization of laser transformation hardening parameters of commercially pure titanium using Nd:YAG laser

    • Duradundi Sawant Badkar
    • Krishna Shankar Pandey
    • G. Buvanashekaran

    ORIGINAL ARTICLE 07 July 2011 Pages: 169 - 192

19. Numerical simulation of single particle acceleration process by SPH coupled FEM for abrasive waterjet cutting

    • Yu Feng
    • Wang Jianming
    • Liu Feihong

    ORIGINAL ARTICLE 07 July 2011 Pages: 193 - 200

20. Jetting stability of molten caprolactam in an additive inkjet manufacturing process

    • Saeed Fathi
    • Phill Dickens
    • Richard Hague

    ORIGINAL ARTICLE 10 July 2011 Pages: 201 - 212

21. A evaluation of surface roughness classes by computer vision using wavelet transform in the frequency domain

    • Patricia Morala-Argüello
    • Joaquín Barreiro
    • Enrique Alegre

    Original Article 07 July 2011 Pages: 213 - 220

22. Automatic single-line drawing creation from a paper-based overtraced freehand sketch

    • Natthavika Chansri
    • Pisut Koomsap

    ORIGINAL ARTICLE 16 July 2011 Pages: 221 - 242

23. A study on cutting errors in the tooth profiles of the spur gears manufactured in CNC milling machine

    • Cihan Özel

    ORIGINAL ARTICLE 23 June 2011 Pages: 243 - 251

24. Finite element modeling of machining of hydrogenated Ti-6Al-4V alloy

    • S. B. Yang
    • Jiuhua Xu
    • Weihua Wei

    ORIGINAL ARTICLE 01 July 2011 Pages: 253 - 261

25. Finite element analysis and experimental investigation on deformation mechanism of non-axisymmetric tube spinning

    • Qinxiang Xia
    • Xiuquan Cheng
    • Feng Ruan

    ORIGINAL ARTICLE 07 July 2011 Pages: 263 - 272

26. A hybrid genetic algorithm for integrated process planning and scheduling problem with precedence constraints

    • M. R. Amin-Naseri
    • Ahmad J. Afshari

    ORIGINAL ARTICLE 07 July 2011 Pages: 273 - 287

27. Synchronization in multi-echelon supply chain applying timing discount

    • Reza Sarlak
    • Ali Nookabadi

    ORIGINAL ARTICLE 10 July 2011 Pages: 289 - 297

28. Some single-machine scheduling problems with the extended sum-of-processing-time-based aging effect

    • Radosław Rudek

    Original Article Open access 10 July 2011 Pages: 299 - 309

29. Multi-agent-based proactive–reactive scheduling for a job shop

    • Ping Lou
    • Quan Liu
    • Sherry Xiaoyun Sun

    ORIGINAL ARTICLE 07 July 2011 Pages: 311 - 324

30. Due-date scheduling on parallel machines with job splitting and sequence-dependent major/minor setup times

    • Taeho Park
    • Taehyung Lee
    • Chang Ouk Kim

    ORIGINAL ARTICLE 10 July 2011 Pages: 325 - 333

31. A review on assembly sequence planning and assembly line balancing optimisation using soft computing approaches

    • Mohd Fadzil Faisae Rashid
    • Windo Hutabarat
    • Ashutosh Tiwari

    Original Article 02 August 2011 Pages: 335 - 349

32. Analysis and optimisation of a network of closed-loop automobile assembly line using simulation

    • Luis Pinto Ferreira
    • Enrique Ares Gómez
    • Benny Tjahjono

    ORIGINAL ARTICLE 12 July 2011 Pages: 351 - 366

33. Multi-objective optimization of vehicle crashworthiness using a new particle swarm based approach

    • Ali R. Yildiz
    • Kiran N. Solanki

    ORIGINAL ARTICLE 08 September 2011 Pages: 367 - 376

34. Contact states recognition in robotic part mating based on support vector machines

    • Zivana Jakovljevic
    • Petar B. Petrovic
    • Janko Hodolic

    ORIGINAL ARTICLE 10 July 2011 Pages: 377 - 395

35. A case study on the object-oriented framework for modeling product families with the dominant variation of the topology in the one-of-a-kind production

    • Dejan Slobodan Aleksić
    • Dragan S. Janković
    • Leonid V. Stoimenov

    ORIGINAL ARTICLE 24 June 2011 Pages: 397 - 412

36. Impact of forecasting methods on variance ratio in order-up-to level policy

    • Matloub Hussain
    • Anamitra Shome
    • Dong Myung Lee

    ORIGINAL ARTICLE 01 July 2011 Pages: 413 - 420