1. Anti-friction and wear resistance analysis of cemented carbide coatings

   • Dong Wenlong
   • Yang Xuefeng
   • Wang Zhiyuan

   Critical Review 12 September 2022 Pages: 2795 - 2821

   

2. Towards advanced prediction and control of machining distortion: a comprehensive review

   • Maria Aurrekoetxea
   • Iñigo Llanos
   • Luis Norberto López de Lacalle

   Critical Review 14 September 2022 Pages: 2823 - 2848

   

3. Effects of laser process parameters on the hardness profile of AISI 4340 cylindrical samples: statistical and experimental analyses

   • Karim Bensalem
   • Noureddine Barka
   • Mahmoud Moradi

   ORIGINAL ARTICLE 21 June 2022 Pages: 2849 - 2867

   

4. Correction to: Effects of laser process parameters on the hardness profile of AISI 4340 cylindrical samples: statistical and experimental analyses

   • Karim Bensalem
   • Noureddine Barka
   • Mahmoud Moradi

   Correction 08 September 2022 Pages: 2869 - 2869

5. Rapid prediction of multi-directionality of polished surface topography based on angular spectrum

   • Qing-Hui Wang
   • Xiao-Lin Fang
   • Zhao-Yang Liao

   ORIGINAL ARTICLE 08 September 2022 Pages: 2871 - 2886

   

6. Tool positioning in five-axis machining on a tensor product surface using circular rays

   • Mukhmeet Singh
   • Sanjeev Bedi
   • Stephen Mann

   ORIGINAL ARTICLE 08 September 2022 Pages: 2887 - 2898

   

7. Effect of chatter on material removal during surface milling of thin-walled carbon fiber–reinforced plastic (CFRP) components

   • Fuji Wang
   • Jun Deng
   • Yongquan Lin

   ORIGINAL ARTICLE 08 September 2022 Pages: 2899 - 2910

   

8. Effect of amplitude ratios on hole quality in longitudinal–torsional coupled ultrasonic-assisted drilling of CFRP composites

   • Guofeng Ma
   • Renke Kang
   • Zhigang Dong

   ORIGINAL ARTICLE 09 September 2022 Pages: 2911 - 2926

   

9. Cooling and lubrication performance of supercritical CO₂ mixed with nanofluid minimum quantity lubrication in turning Ti-6Al-4 V

   • Haihong Huang
   • ·Shuaishuai Liu
   • ·Zhifeng Liu

   ORIGINAL ARTICLE 09 September 2022 Pages: 2927 - 2938

   

10. Control of bead geometry using multiple model approach in wire-arc additive manufacturing (WAAM)

    • Zeya Wang
    • Sandra Zimmer-Chevret
    • Gabriel Abba

    ORIGINAL ARTICLE 09 September 2022 Pages: 2939 - 2951

    

11. Predictive model for cutting forces and specific cutting energy in ultrasonic-assisted grinding process: a mechanistic approach

    • Aswani Kumar Singh
    • Varun Sharma
    • Pulak M. Pandey

    ORIGINAL ARTICLE 09 September 2022 Pages: 2953 - 2969

    

12. Effect of machining-induced surface topography on corrosion behaviors of 304 austenitic stainless steel in pre-stress grinding

    • Zhuangzhuang Hou
    • Shichao Xiu
    • Yunlong Yao

    ORIGINAL ARTICLE 09 September 2022 Pages: 2971 - 2985

    

13. Analysis on grain growth of SS316L induced by plasma cutting process using probabilistic FEM with experimental verification

    • Mohd Shahar Sulaiman
    • Yupiter H. P. Manurung
    • Yusuf Olanrewaju Busari

    ORIGINAL ARTICLE 09 September 2022 Pages: 2987 - 3005

    

14. Correction to: Analysis on grain growth of SS316L induced by plasma cutting process using probabilistic FEM with experimental verification

    • Mohd Shahar Sulaiman
    • Yupiter H. P. Manurung
    • Yusuf Olanrewaju Busari

    Correction 14 September 2022 Pages: 3007 - 3007

15. Machinability of partition milling stainless steel/Inconel functionally gradient material printed with directed energy deposition

    • Benquan Li
    • Runyu Zhang
    • Wei Li

    ORIGINAL ARTICLE 10 September 2022 Pages: 3009 - 3022

    

16. Effect of power excitation form on machining characteristics of TC4 titanium alloy by SEAM-ECM combined machining

    • Shengsheng Zhang
    • Jianping Zhou
    • Yan Xu

    ORIGINAL ARTICLE 10 September 2022 Pages: 3023 - 3039

    

17. Chatter suppression mechanism and parameters configuration of the spindle speed variation with piecewise characteristics

    • Zhenmin Li
    • Qinghua Song
    • Yukui Cai

    ORIGINAL ARTICLE 10 September 2022 Pages: 3041 - 3055

    

18. Numerical simulation and experimental investigation of bending deformation mechanism during post-rolling air cooling of AH36 L-beam

    • Jie Li
    • Xianming Zhao
    • Yang Yang

    ORIGINAL ARTICLE 12 September 2022 Pages: 3057 - 3073

    

19. Multi-response optimization of the bulging-processed parameters for enhanced residual stress state of TC4-rolled rings

    • Nan Lv
    • Dong Liu
    • Yaping Wang

    ORIGINAL ARTICLE 12 September 2022 Pages: 3075 - 3093

    

20. Effect of laser cladding parameters in NbC reinforced 316L austenitic stainless steel composite depositions on a mild steel

    • Luis Henrique Rodrigues Apolinário
    • Edwar Andres Torres
    • Tiago Felipe de Abreu Santos

    ORIGINAL ARTICLE 12 September 2022 Pages: 3095 - 3113

    

21. Investigation of an alternate computationally efficient technique to model laser shock peening by modification of the pressure load

    • Jacques Karel Dreyer
    • Dawood Ahmed Desai
    • Schalk Kok

    ORIGINAL ARTICLE 12 September 2022 Pages: 3115 - 3127

    

22. Selection of a suitable electrolyte for electrochemical grinding of high-speed steel roll material based on electrochemical techniques and uniform design machining experiments

    • Gang Cao
    • Huaichao Wu
    • Kui Yuan

    ORIGINAL ARTICLE 12 September 2022 Pages: 3129 - 3147

    

23. An improved virtual metrology method in chemical vapor deposition systems via multitask gaussian processes and adaptive active learning

    • Shanling Ji
    • Min Dai
    • Jianxiong Zhu

    ORIGINAL ARTICLE 12 September 2022 Pages: 3149 - 3159

    

24. Underwater laser micromachining of silicon in pressurized environment

    • Wisan Charee
    • Huan Qi
    • Viboon Saetang

    ORIGINAL ARTICLE 12 September 2022 Pages: 3161 - 3169

    

25. Influence of sub-surface deformation induced by machining on stress corrosion cracking in lead-free brass

    • Jakob Johansson
    • Volodymyr Bushlya
    • Filip Lenrick

    ORIGINAL ARTICLE Open access 13 September 2022 Pages: 3171 - 3181

    

26. Influence of dimension, building position, and orientation on mechanical properties of EBM lattice Ti6Al4V trusses

    • Raffaele Sepe
    • Alessandro De Luca
    • Francesco Caputo

    ORIGINAL ARTICLE Open access 13 September 2022 Pages: 3183 - 3198

    

27. Processing and microstructure analysis on the precision rotary swaging of inner-stepped aero-engine shaft

    • Tiantai Tian
    • Miao Cao
    • Bin Han

    ORIGINAL ARTICLE 13 September 2022 Pages: 3199 - 3216

    

28. Experimental and numerical investigation of the effects of sheet material, plug-assist tool material, and process conditions on the mechanical pre-stretching stage of plug-assist thermoforming

    • Oualid Atmani
    • Fazilay Abbès
    • Boussad Abbès

    ORIGINAL ARTICLE 13 September 2022 Pages: 3217 - 3234

    

29. The effect of contactless support parameters on the mechanical properties of laser powder bed fusion produced overhang parts

    • Orhan Gülcan
    • Kadir Günaydın
    • Evren Yasa

    ORIGINAL ARTICLE 13 September 2022 Pages: 3235 - 3253

    

30. A novel collision-free NC code generation method with fixed tool orientation vector using the geometric decoupling strategy based on the three rotary axes milling head

    • Zirui Cao
    • Yongsheng Zhao
    • Zhifeng Liu

    ORIGINAL ARTICLE 13 September 2022 Pages: 3255 - 3279

    

31. Fabrication and quality analysis of angle composite part by vacuum-bag-only process with interleaved woven fiber/prepreg layup

    • Kai-Jen Wu
    • Wen-Bin Young

    ORIGINAL ARTICLE 14 September 2022 Pages: 3281 - 3297

    

32. Optimization of Ni-Zn-P ternary alloy films fabricated using Grey-Taguchi design and control charts

    • Jin-Yih Kao

    ORIGINAL ARTICLE 14 September 2022 Pages: 3299 - 3310

    

33. Influence of warm isostatic press (WIP) process parameters on mechanical properties of additively manufactured acrylonitrile butadiene styrene (ABS) parts

    • Seong Je Park
    • Seong Jun Park
    • Il Hyuk Ahn

    ORIGINAL ARTICLE Open access 14 September 2022 Pages: 3311 - 3322

    

34. ZrO₂-CNT composite production through reducing atmosphere

    • Vicente Gerlin Neto
    • Cristian Guilherme Barbosa Pereira
    • Cesar Renato Foschini

    ORIGINAL ARTICLE 14 September 2022 Pages: 3323 - 3335

    

35. Thermal–mechanical characterization and drilling damage mechanism of triaxial braided composite

    • Jiajia Yu
    • Zhongxiang Pan
    • Zhenyu Wu

    ORIGINAL ARTICLE 14 September 2022 Pages: 3337 - 3350

    

36. Fast compensation of spatial PDGE of five-axis machine tools based on error parameter optimization

    • Weishu Song
    • Peiqing Ye
    • Bingran Li

    ORIGINAL ARTICLE 14 September 2022 Pages: 3351 - 3364

    

37. A milling cutter state recognition method based on multi-source heterogeneous data fusion

    • Weijun Liu
    • Zhiqiang Tian
    • Jianchao Deng

    ORIGINAL ARTICLE 14 September 2022 Pages: 3365 - 3378

    

38. Robust locating research of welding fixtures for the aluminum alloy sidewall of a high-speed train body

    • Kuigang Yu
    • Xianjin Wang
    • Weili Peng

    ORIGINAL ARTICLE 14 September 2022 Pages: 3379 - 3392

    

39. Manufacturing of durable tribological surface by grinding process

    • Seyed Hasan Musavi
    • Hamed Adibi
    • Seyed Mehdi Rezaei

    ORIGINAL ARTICLE 14 September 2022 Pages: 3393 - 3410

    

40. Study on surface morphology and residual stress in inclined milling of titanium alloy TC11

    • Yanxuan Song
    • Hongxu Chen
    • Ming Yin

    ORIGINAL ARTICLE 14 September 2022 Pages: 3411 - 3423

    

41. A novel assembly process guidance using augmented reality for a standalone hybrid energy system

    • Sasan Sattarpanah Karganroudi
    • Rosa Elvira Silva
    • Hussein Ibrahim

    ORIGINAL ARTICLE 14 September 2022 Pages: 3425 - 3445

    

42. The theoretical model of straightness error in gun drilling of small diameter and deep hole

    • Ying Zhang
    • Liang Li
    • JiaCheng Lou

    ORIGINAL ARTICLE 14 September 2022 Pages: 3447 - 3465