1. Effect of pulse width of middle-coil current on deformation behavior in electromagnetic tube forming under two-stage coils system

   • Xiao Zhang
   • Shaowei Ouyang
   • Fangxiong Deng

   ORIGINAL ARTICLE 20 August 2020 Pages: 1139 - 1152

   

2. NC machining verification algorithm based on the STL model

   • Ying Miao
   • Xiaowen Song
   • Zhonghua Lu

   ORIGINAL ARTICLE 20 August 2020 Pages: 1153 - 1161

   

3. Stability analysis of 2-DOF milling dynamics for simultaneously varying tooth pitch and spindle speed with helix angle effect

   • Wen-An Yang
   • Chao Huang

   ORIGINAL ARTICLE 20 August 2020 Pages: 1163 - 1177

   

4. An efficient generation grinding method for spur face gear along contact trace using disk CBN wheel

   • Xiaomeng Chu
   • Yanzhong Wang
   • Lei Zang

   ORIGINAL ARTICLE 21 August 2020 Pages: 1179 - 1187

   

5. Modeling and simulation of the flow drill screw process of a DP590/Al6061-T6 multi-material joint used for vehicle body

   • Weixue Liu
   • Xuewu Zhu
   • Luoxing Li

   ORIGINAL ARTICLE 21 August 2020 Pages: 1189 - 1201

   

6. Additively manufactured integrated slit mask for laser ultrasonic guided wave inspection

   • Geo Davis
   • Krishnan Balasubramaniam
   • Prabhu Rajagopal

   ORIGINAL ARTICLE 21 August 2020 Pages: 1203 - 1217

   

7. Residual stress and distortion modeling on aeronautical aluminum alloy parts for machining sequence optimization

   • Mikel Casuso
   • Roberto Polvorosa
   • Aitzol Lamikiz

   ORIGINAL ARTICLE 21 August 2020 Pages: 1219 - 1232

   

8. Numerical and experimental study on formability of TC4 alloy in a novel multi-layer sheet hot stamping process

   • Xiaoming Yang
   • Baoyu Wang
   • Jing Zhou

   ORIGINAL ARTICLE 21 August 2020 Pages: 1233 - 1247

   

9. Modeling of shrinkage characteristics during investment casting for typical structures of hollow turbine blades

   • Yiwei Dong
   • Weiguo Yan
   • Yancheng You

   ORIGINAL ARTICLE 21 August 2020 Pages: 1249 - 1260

   

10. The effect of scan path on thermal gradient during selective laser melting

    • Benjamin Blackford
    • Gene Zak
    • Il Yong Kim

    ORIGINAL ARTICLE 22 August 2020 Pages: 1261 - 1274

    

11. An effective thread milling force prediction model considering instantaneous cutting thickness based on the cylindrical thread milling simplified to side milling process

    • Zihua Hu
    • Changjiang Qin
    • Yeming Zou

    ORIGINAL ARTICLE 22 August 2020 Pages: 1275 - 1283

    

12. Optimization of a wearable speed monitoring device for welding applications

    • Abanti S. Afroz
    • Francesca Digiacomo
    • Mario Milazzo

    ORIGINAL ARTICLE 22 August 2020 Pages: 1285 - 1293

    

13. Influence of die parameters on internal voids during multi-wedge-multi-pass cross-wedge rolling

    • Zhi Jia
    • Jinjin Ji
    • Baolin Wei

    ORIGINAL ARTICLE 22 August 2020 Pages: 1295 - 1304

    

14. A study on environment-friendly machining of titanium alloy via composite electrostatic spraying

    • Yu Su
    • Hai Jiang
    • Zhiqiang Liu

    ORIGINAL ARTICLE 22 August 2020 Pages: 1305 - 1317

    

15. Effect of high-temperature brazing with a nickel-based STEMET 1301A brazing alloy on the unbrazing temperature of 12Kh18N10T steel joints

    • А. Ivannikov
    • E. Krasnova
    • O. Sevryukov

    ORIGINAL ARTICLE 22 August 2020 Pages: 1319 - 1326

    

16. Optimization and fabrication of curvilinear micro-grooved cutting tools for sustainable machining based on finite element modelling of the cutting process

    • Guoliang Liu
    • Tuğrul Özel
    • Shufeng Sun

    ORIGINAL ARTICLE 23 August 2020 Pages: 1327 - 1338

    

17. Research on the CNC incremental forming based on multidirectional real-time adjustment of the sheet posture

    • Hu Zhu
    • Jilong Li

    ORIGINAL ARTICLE 23 August 2020 Pages: 1339 - 1350

    

18. All position-dependent geometric error identification for rotary axes of five-axis machine tool using double ball bar

    • Qingzhao Li
    • Wei Wang
    • Hai Li

    ORIGINAL ARTICLE 23 August 2020 Pages: 1351 - 1366

    

19. A hybrid model for force prediction in orthogonal cutting with chamfered tools considering size and edge effect

    • Jian Weng
    • Kejia Zhuang
    • Han Ding

    ORIGINAL ARTICLE 24 August 2020 Pages: 1367 - 1384

    

20. A digital twin-driven production management system for production workshop

    • Jun Ma
    • Huimin Chen
    • Luyang Liu

    ORIGINAL ARTICLE 24 August 2020 Pages: 1385 - 1397

    

21. FEM-based optimization approach to machining strategy for thin-walled parts made of hard and brittle materials

    • Zhiqiang Liu
    • Renke Kang
    • Xianglong Zhu

    ORIGINAL ARTICLE 24 August 2020 Pages: 1399 - 1413

    

22. Numerical simulation for deformation characteristics and fracture prediction of perforated sheet in incremental sheet punching

    • Lihua Li
    • Jin Wang
    • Shuqin Zhang

    ORIGINAL ARTICLE 24 August 2020 Pages: 1415 - 1427

    

23. Prediction model of peripheral milling surface geometry considering cutting force and vibration

    • Boling Yan
    • Lida Zhu
    • Changfu Liu

    ORIGINAL ARTICLE 24 August 2020 Pages: 1429 - 1443

    

24. Tool condition monitoring in milling process using multifractal detrended fluctuation analysis and support vector machine

    • Jingchao Guo
    • Anhai Li
    • Rufeng Zhang

    ORIGINAL ARTICLE 24 August 2020 Pages: 1445 - 1456

    

25. Effects of stepped cylindrical electrode in electrical discharge machining of blind holes

    • Xuanyu Mao
    • Xiangzhi Wang
    • Songlin Ding

    ORIGINAL ARTICLE 24 August 2020 Pages: 1457 - 1469

    

26. Optimization of dilution rate of laser cladding repair based on deep learning

    • Shichao Zhu
    • Wenliang Chen
    • Erhua Wang

    ORIGINAL ARTICLE 24 August 2020 Pages: 1471 - 1484

    

27. Reshaping diagrams for bending straightening of forged aeronautical components

    • Ramiro Mena
    • José V. Aguado
    • Antonio Huerta

    ORIGINAL ARTICLE 24 August 2020 Pages: 1485 - 1502

    

28. Optimization of belt grinding stepover for biomimetic micro-riblets surface on titanium alloy blades

    • Guijian Xiao
    • Youdong Zhang
    • Shui He

    ORIGINAL ARTICLE 24 August 2020 Pages: 1503 - 1513

    

29. A new tool path with point contact and its effect on incremental sheet forming process

    • Zhidong Chang
    • Wenshuai Huang
    • Jun Chen

    ORIGINAL ARTICLE 24 August 2020 Pages: 1515 - 1525

    

30. Multiphysics research on electrochemical machining of micro holes with internal features

    • Guodong Liu
    • Hao Tong
    • Qifeng Tan

    ORIGINAL ARTICLE 24 August 2020 Pages: 1527 - 1542

    

31. Non-linear model of energy consumption for in-process control in electrical discharge machining

    • Kanka Goswami
    • G. L. Samuel

    ORIGINAL ARTICLE 24 August 2020 Pages: 1543 - 1561

    

32. Formability analysis of hot-rolled dual-phase steel during the multistage stamping process of wheel disc

    • Weijin Chen
    • Hongwu Song
    • Dorel Banabic

    ORIGINAL ARTICLE 24 August 2020 Pages: 1563 - 1573

    

33. Research on deformation prediction and error compensation in precision turning of micro-shafts

    • Chenxu Li
    • Xibin Wang
    • Li Jiao

    ORIGINAL ARTICLE 25 August 2020 Pages: 1575 - 1588

    

34. Processing of in situ Al₃Ti/Al composites by advanced high shear technology: influence of mixing speed

    • Yan Zeng
    • David Himmler
    • Carolin Körner

    ORIGINAL ARTICLE 25 August 2020 Pages: 1589 - 1599

    

35. A hybrid approach for cutting force prediction in flank milling based on analytical and 3D finite element method

    • Junli Li
    • Xiaojiang Cai
    • Ming Chen

    ORIGINAL ARTICLE 25 August 2020 Pages: 1601 - 1613

    

36. Precision turning analysis of Ti-6Al-4V skin produced by selective laser melting using a design of experiment approach

    • G. Le Coz
    • R. Piquard
    • P. Laheurte

    ORIGINAL ARTICLE 25 August 2020 Pages: 1615 - 1625

    

37. Analysis of forming-induced distortion of dissimilar Ti6Al4V/AA1050 laminate made by non-equal channel lateral co-extrusion

    • Xin Xue
    • Kai Sun
    • Juan Liao

    ORIGINAL ARTICLE 26 August 2020 Pages: 1627 - 1640

    

38. Milling performance of titanium alloy based on short electric arc machining with direct current power source

    • Kai Liu
    • Jianping Zhou
    • Dan Song

    ORIGINAL ARTICLE 26 August 2020 Pages: 1641 - 1652

    

39. Surface quality measurement by contact and laser methods on thermally modified spruce wood after plain milling

    • Fatemeh Razaei
    • Milan Gaff
    • Miroslav Gašparík

    ORIGINAL ARTICLE 27 August 2020 Pages: 1653 - 1663

    

40. Determination of pressurizing rate during hot gas forming with integrated heat treatment of Al–Cu–Li alloy: deformation and strengthening behaviors

    • Xiaobo Fan
    • Xiaoyue Jin
    • Shijian Yuan

    ORIGINAL ARTICLE 27 August 2020 Pages: 1665 - 1676

    

41. Correction to: Investigation of internal defects and premature fracture of dissimilar refill friction stir spot welds of AA5754 and AA6061

    • Antonio Cappelletti Ferreira
    • Leonardo Contri Campanelli
    • Jorge Fernandez dos Santos

    Correction 17 August 2020 Pages: 1677 - 1677

42. Correction to: A skeleton-based process planning framework for support-free 3 + 2-axis printing of multi-branch freeform parts

    • Xiangyu Wang
    • Lufeng Chen
    • Kai Tang

    Correction 23 August 2020 Pages: 1679 - 1679