1. Powder interlayer bonding of geometrically complex Ti-6Al-4V parts

   • I. T. Watkins
   • H. M. Davies
   • S. Marchisio

   ORIGINAL ARTICLE Open access 20 December 2019 Pages: 3629 - 3639

   

2. A strategy to evaluate and minimize parallelism errors of a rotor system in a precision rotary table

   • Jun Zha
   • Hangcheng Zhang
   • Yaolong Chen

   ORIGINAL ARTICLE 07 January 2020 Pages: 3641 - 3648

   

3. Innovative methodology for measuring residual stress in engine blocks

   • J. A. Aguilar-Navarro
   • J. R. González-López
   • J. A. Castillo-Elizondo

   ORIGINAL ARTICLE 07 January 2020 Pages: 3649 - 3658

   

4. A comparison study on wear characteristics of Ni-based, Co-based and Fe-based alloys for heated hot stamping tools manufactured by surfacing technology

   • Kemin Zhang
   • Jie Zhou
   • Jiansheng Zhang

   ORIGINAL ARTICLE 07 January 2020 Pages: 3659 - 3668

   

5. Control and prediction of forming quality in curved surface multi-track laser cladding with curve paths

   • Guofu Lian
   • Hao Zhang
   • Jibin Jiang

   ORIGINAL ARTICLE 07 January 2020 Pages: 3669 - 3682

   

6. Friction stir lap welding of AA2024-T4 with drastically different thickness

   • Yanxin Zhang
   • Yongxian Huang
   • Qiang Fan

   ORIGINAL ARTICLE 07 January 2020 Pages: 3683 - 3691

   

7. Tensile properties and microstructural features of 304L austenitic stainless steel produced by wire-and-arc additive manufacturing

   • Vittoria Laghi
   • Michele Palermo
   • Tomaso Trombetti

   ORIGINAL ARTICLE 07 January 2020 Pages: 3693 - 3705

   

8. An applied explicit mathematical model of conical drill point geometry without flank rubbing

   • Tao Zeng
   • Zezhong C. Chen
   • Shequan Wang

   ORIGINAL ARTICLE 07 January 2020 Pages: 3707 - 3720

   

9. An integrated operation feasibility analysis method for manual assembly and disassembly in restricted space

   • Wenmin Zhu
   • Xiumin Fan
   • Qichang He

   ORIGINAL ARTICLE 07 January 2020 Pages: 3721 - 3740

   

10. Multi-spark model for predicting surface roughness of electrical discharge textured surfaces

    • S. Jithin
    • Upendra V. Bhandarkar
    • Suhas S. Joshi

    ORIGINAL ARTICLE 07 January 2020 Pages: 3741 - 3758

    

11. Performance evaluation of a giant magnetostrictive rotary ultrasonic machine tool

    • Huilin Zhou
    • Jianfu Zhang
    • Jianjian Wang

    ORIGINAL ARTICLE 07 January 2020 Pages: 3759 - 3773

    

12. Optimization of vacuum casting process parameters to enhance tensile strength of components using design of experiments approach

    • Chil-Chyuan Kuo
    • Hsueh-An Liu
    • Chao-Ming Chang

    ORIGINAL ARTICLE 07 January 2020 Pages: 3775 - 3785

    

13. Automatic generation of auxiliary cutting paths based on sheet material semantic information

    • Jian Li
    • Haifei Zhu
    • Hong Zhang

    ORIGINAL ARTICLE 08 January 2020 Pages: 3787 - 3797

    

14. Cutting edge control by monitoring the tapping torque of new and resharpened tapping tools in Inconel 718

    • R. Polvorosa
    • L.N. López de Lacalle
    • I. Zamakona

    ORIGINAL ARTICLE 08 January 2020 Pages: 3799 - 3808

    

15. Influences of feed rate and wall thickness reduction on the microstructures of thin-walled Hastelloy C-276 cylindrical parts during staggered spinning

    • Y. C. Lin
    • Shu-Sheng Qian
    • Hui Yang

    ORIGINAL ARTICLE 08 January 2020 Pages: 3809 - 3821

    

16. Investigation on the effect of cavitation in ultrasonic-assisted AWJ

    • Zhe Lv
    • Rongguo Hou
    • Xuesong Chen

    ORIGINAL ARTICLE 08 January 2020 Pages: 3823 - 3830

    

17. Integrative and multi-disciplinary framework for the 3D rehabilitation of large mandibular defects

    • Khaja Moiduddin
    • Syed Hammad Mian
    • Usama Umer

    ORIGINAL ARTICLE 08 January 2020 Pages: 3831 - 3847

    

18. Temporal design for additive manufacturing

    • S. Saliba
    • J. C. Kirkman-Brown
    • L. E. J. Thomas-Seale

    ORIGINAL ARTICLE Open access 09 January 2020 Pages: 3849 - 3857

    

19. Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining

    • Maryam Jamshidi
    • Xavier Rimpault
    • Jean-François Chatelain

    ORIGINAL ARTICLE 09 January 2020 Pages: 3859 - 3868

    

20. Nanocutting mechanism of 6H-SiC investigated by scanning electron microscope online observation and stress-assisted and ion implant-assisted approaches

    • Zongwei Xu
    • Lei Liu
    • Fengzhou Fang

    ORIGINAL ARTICLE 09 January 2020 Pages: 3869 - 3880

    

21. An optimized convolutional neural network for chatter detection in the milling of thin-walled parts

    • Weiguo Zhu
    • Jichao Zhuang
    • Fenghe Wu

    ORIGINAL ARTICLE 10 January 2020 Pages: 3881 - 3895

    

22. Multi-objective optimization of turning titanium-based alloy Ti-6Al-4V under dry, wet, and cryogenic conditions using gray relational analysis (GRA)

    • Muhammad Ali Khan
    • Syed Husain Imran Jaffery
    • Salman Sagheer Warsi

    ORIGINAL ARTICLE 10 January 2020 Pages: 3897 - 3911

    

23. Comparative analysis of wobble milling, helical milling and conventional drilling of CFRPs

    • Csongor Pereszlai
    • Norbert Geier

    ORIGINAL ARTICLE Open access 10 January 2020 Pages: 3913 - 3930

    

24. Applicability of friction-assisted tube straining method to produce high-strength copper tubes

    • S. H. Hosseini
    • M. Sedighi

    ORIGINAL ARTICLE 10 January 2020 Pages: 3931 - 3941

    

25. A method for tracing key geometric errors of vertical machining center based on global sensitivity analysis

    • Haorong Wu
    • Hualin Zheng
    • Maolin Rong

    ORIGINAL ARTICLE 10 January 2020 Pages: 3943 - 3956

    

26. Feasibility analysis of active chatter control for stationary and revolving bar boring operations based on magnitude of control forces using fractional order PD^λ controller

    • Rajiv Kumar Vashisht
    • Qingjin Peng

    ORIGINAL ARTICLE 10 January 2020 Pages: 3957 - 3974

    

27. Surface topography model with considering corner radius and diameter of ball-nose end miller

    • Jing Zhang
    • Song Zhang
    • Shaolei Lu

    ORIGINAL ARTICLE 10 January 2020 Pages: 3975 - 3984

    

28. Experimental analysis of manufacturing parameters’ effect on the flexural properties of wood-PLA composite parts built through FFF

    • M. Damous Zandi
    • Ramon Jerez-Mesa
    • J. Antonio Travieso-Rodriguez

    ORIGINAL ARTICLE 10 January 2020 Pages: 3985 - 3998

    

29. Computer-aided design (CAD) compensation through modeling of shrinkage in additively manufactured parts

    • Insaf Bahnini
    • Uzair Khaleeq uz Zaman
    • Ali Siadat

    ORIGINAL ARTICLE 11 January 2020 Pages: 3999 - 4009

    

30. Experimental analysis and modeling of friction in sheet metal forming considering the influence of drawbeads

    • Salvatore Leocata
    • Thomas Senner
    • Alexander Brosius

    ORIGINAL ARTICLE 11 January 2020 Pages: 4011 - 4021

    

31. Processing and tooling considerations in joining by forming technologies; part B—friction-based welding

    • Masoud Salamati
    • Mahdi Soltanpour
    • Ali Fazli

    ORIGINAL ARTICLE 11 January 2020 Pages: 4023 - 4081

    

32. Thickness dependent yielding behavior and formability of AA6082-T6 alloy: experimental observation and modeling

    • Onur Çavuşoğlu
    • Halit İlhan Sürücü
    • Mahmut Alkan

    ORIGINAL ARTICLE 11 January 2020 Pages: 4083 - 4091

    

33. Frequency coupling design of ultrasonic horn with spiral slots and performance analysis of longitudinal-torsional machining characteristics

    • Yu Pang
    • Pingfa Feng
    • Qiaoli Zhang

    ORIGINAL ARTICLE 11 January 2020 Pages: 4093 - 4103

    

34. Analytical modeling of residual stress in direct metal deposition considering scan strategy

    • Elham Mirkoohi
    • James R. Dobbs
    • Steven Y. Liang

    ORIGINAL ARTICLE 11 January 2020 Pages: 4105 - 4121

    

35. Effects of rolling ball tool parameters on roughness, sheet thinning, and forming force generated during SPIF process

    • Lassaad Kilani
    • Tarek Mabrouki
    • Salim Belhadi

    ORIGINAL ARTICLE 13 January 2020 Pages: 4123 - 4142

    

36. Physicochemical properties of degradable vegetable-based oils on minimum quantity lubrication milling

    • Xiufang Bai
    • Fengmin Zhou
    • Qingan Yin

    ORIGINAL ARTICLE 13 January 2020 Pages: 4143 - 4155

    

37. Industrial- and automotive-used lubricating oils recycling cum acidic sludge treatment

    • Temitayo E. Oladimeji
    • Kehinde M. Oguntuashe
    • Oyinlola R. Obanla

    ORIGINAL ARTICLE 13 January 2020 Pages: 4157 - 4167

    

38. Study on tool orientation feasible region with constraint of non-linear error for high-precision five-axis machining

    • Jian-wei Ma
    • Si-yu Chen
    • Xiao Lu

    ORIGINAL ARTICLE 13 January 2020 Pages: 4169 - 4181

    

39. Experimental analysis of tribological performance of palm oil blended with hexagonal boron nitride nanoparticles as an environment-friendly lubricant

    • Mohd Fadzli Bin Abdollah
    • Hilmi Amiruddin
    • Arina Dayana Jamallulil

    ORIGINAL ARTICLE 13 January 2020 Pages: 4183 - 4191

    

40. Planning and construction of mechanism for surface wear testing and fault analysis in quadril joint prosthetic tribosystem

    • Rubens Ribeiro
    • Aparecido Carlos Gonçalves
    • Maria da Consolação Fonseca de Albuquerque

    ORIGINAL ARTICLE 14 January 2020 Pages: 4193 - 4202

    

41. A predictive approach to investigating effects of ultrasonic-assisted burnishing process on surface performances of shaft targets

    • Zhihua Liu
    • Mengjian Yang
    • Qilong Dai

    ORIGINAL ARTICLE 14 January 2020 Pages: 4203 - 4219

    

42. Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment

    • Ali H. Abdelrazek
    • I. A. Choudhury
    • S. N. Kazi

    ORIGINAL ARTICLE 14 January 2020 Pages: 4221 - 4245

    

43. Stability of micro dry wire EDM: OFAT and DOE method

    • Asfana Banu
    • Mohammad Yeakub Ali
    • Mohamed Konneh

    ORIGINAL ARTICLE 14 January 2020 Pages: 4247 - 4261

    

44. Development and kinetic evaluation of a low-cost temperature-sensitive shape memory polymer for 4-dimensional printing

    • Michael Carlson
    • Ye Li

    ORIGINAL ARTICLE 14 January 2020 Pages: 4263 - 4279

    

45. Study on vibration suppression performance of a flexible fixture for a thin-walled casing

    • Xing Wang
    • Pengju Ma
    • Shunti Ning

    ORIGINAL ARTICLE 15 January 2020 Pages: 4281 - 4291

    

46. Servo axis incipient degradation assessment of CNC machine tools using the built-in encoder

    • Yong Li
    • Ming Zhao
    • Shaoping Zhou

    ORIGINAL ARTICLE 15 January 2020 Pages: 4293 - 4305

    

47. Development of a micro punching machine tool for micro lens array on steel mold

    • Rongli Zhao
    • Sujuan Wang
    • Xiafeng Zhang

    ORIGINAL ARTICLE 15 January 2020 Pages: 4307 - 4320

    

48. Effect of sample orientation on the microstructure and microhardness of additively manufactured AlSi10Mg processed by high-pressure torsion

    • Shahir Mohd Yusuf
    • Mathias Hoegden
    • Nong Gao

    ORIGINAL ARTICLE Open access 15 January 2020 Pages: 4321 - 4337

    

49. The effect of the shock wave of the oscillating working medium in a vibrating machine’s reservoir during a multi-energy finishing-grinding vibration processing

    • J. Kundrák
    • M. Morgan
    • V.A. Fedorovich

    ORIGINAL ARTICLE Open access 16 January 2020 Pages: 4339 - 4353

    

50. Cycle time reduction in outsourcing process: case of an Indian aerospace industry

    • Kaushal Kumar Jha
    • Jitesh J. Thakkar
    • Shashank J. Thanki

    ORIGINAL ARTICLE 16 January 2020 Pages: 4355 - 4373