1. Measurement and analysis of thrust force and torque in friction drilling of difficult-to-machine materials

   • Shayan Dehghan
   • M. I. S. Ismail
   • B. T. H. T. Baharudin

   ORIGINAL ARTICLE 08 November 2019 Pages: 2749 - 2769

   

2. Ductility-oriented high-speed grinding of silicon carbide and process design for quality and damage control with higher efficiency

   • Chongjun Wu
   • Weicheng Guo
   • Beizhi Li

   ORIGINAL ARTICLE 08 November 2019 Pages: 2771 - 2784

   

3. Formability and failure analyses of Al/SUS bilayer sheet in single point incremental forming

   • Raneen Abd Ali
   • Wenliang Chen
   • Ahmed Waleed Hussein

   ORIGINAL ARTICLE 08 November 2019 Pages: 2785 - 2798

   

4. Assessment of tool wear and microstructural alteration of the cutting tools in conventional and sustainable slot milling of Ti-6Al-4V alloy

   • Ashutosh Khatri
   • Muhammd P. Jahan
   • Jianfeng Ma

   ORIGINAL ARTICLE 08 November 2019 Pages: 2799 - 2814

   

5. Investigation on the material removal and surface roughness in ultraprecision machining of Al/B₄C/50p metal matrix composites

   • Zhichao Niu
   • Kai Cheng

   ORIGINAL ARTICLE Open access 08 November 2019 Pages: 2815 - 2831

   

6. An experimental investigation on surface layer damage in high-efficiency and low-damage grinding of rail by slotted CBN grinding wheel

   • Yao Wu
   • Mengbo Shen
   • Tan Jin

   ORIGINAL ARTICLE 08 November 2019 Pages: 2833 - 2841

   

7. Vibration suppression of thin-walled workpiece milling using a time-space varying PD control method via piezoelectric actuator

   • Shuyu Wang
   • Qinghua Song
   • Zhanqiang Liu

   ORIGINAL ARTICLE 08 November 2019 Pages: 2843 - 2856

   

8. Improving surface integrity aspects of AISI 316L in the context of bioimplant applications

   • Sadaf Zahoor
   • Muhammad Qaiser Saleem
   • Muhammad Dawood

   ORIGINAL ARTICLE 08 November 2019 Pages: 2857 - 2867

   

9. Experimental and numerical investigation on axial hydro-forging sequence of 6063 aluminum alloy tube

   • Lei Sun
   • Caiyuan Lin
   • Guannan Chu

   ORIGINAL ARTICLE 09 November 2019 Pages: 2869 - 2877

   

10. Chatter detection in robotic drilling operations combining multi-synchrosqueezing transform and energy entropy

    • Jianfeng Tao
    • Hongwei Zeng
    • Chengliang Liu

    ORIGINAL ARTICLE 09 November 2019 Pages: 2879 - 2890

    

11. Multi-Laser Powder Bed Fusion Benchmarking—Initial Trials with Inconel 625

    • H. Wong
    • K. Dawson
    • C. J. Sutcliffe

    ORIGINAL ARTICLE Open access 09 November 2019 Pages: 2891 - 2906

    

12. Steel subsurface damage on plunge cylindrical grinding with sol-gel aluminum oxide grinding wheels

    • Fernando Moreira Bordin
    • Walter Lindolfo Weingaertner

    ORIGINAL ARTICLE 09 November 2019 Pages: 2907 - 2917

    

13. A novel surface polishing method and its fundamental performance in ultra-fine polishing of wafer

    • Jianguo Cao
    • Jianyong Li
    • Baozhen Li

    ORIGINAL ARTICLE 09 November 2019 Pages: 2919 - 2933

    

14. A study on machining characteristics of nickel-based alloy with short electric arc milling

    • Xiaokang Chen
    • Jianping Zhou
    • Guoyu Hu

    ORIGINAL ARTICLE 09 November 2019 Pages: 2935 - 2945

    

15. Ambient and non-ambient temperature depth-sensing indentation of Mg-Sm₂O₃ nanocomposites

    • M. Haghshenas
    • M. Muhammad
    • M. Gupta

    ORIGINAL ARTICLE 09 November 2019 Pages: 2947 - 2956

    

16. Numerical and experimental study of end-milling process of titanium alloy with a cryogenic internal coolant supply

    • Do Young Kim
    • Dong Min Kim
    • Hyung Wook Park

    ORIGINAL ARTICLE 09 November 2019 Pages: 2957 - 2975

    

17. Investigation of the effect of speed ratio on workpiece surface topography and grinding power in cylindrical plunge grinding using grooved and non-grooved grinding wheels

    • A. Patel
    • R. J. Bauer
    • A. Warkentin

    ORIGINAL ARTICLE 09 November 2019 Pages: 2977 - 2987

    

18. Optimized hatch space selection in double-scanning track selective laser melting process

    • Yu-Lung Lo
    • Bung-Yo Liu
    • Hong-Chuong Tran

    ORIGINAL ARTICLE 09 November 2019 Pages: 2989 - 3006

    

19. Coupled effects of vortex tube hybrid cooling with minimal quantity reinforced nanoparticle lubricants in turning NiTi alloys

    • Ahmad Nabil Mohd Khalil
    • Azwan Iskandar Azmi
    • Mohammed Asyraf Mahboob Ali

    ORIGINAL ARTICLE 09 November 2019 Pages: 3007 - 3015

    

20. Effect of edge hone radius on plowing-induced plastic deformation in hard milling: analytical modeling and experimental validation

    • Binxun Li
    • Song Zhang
    • Yujie Fang

    ORIGINAL ARTICLE 09 November 2019 Pages: 3017 - 3029

    

21. A gesture- and head-based multimodal interaction platform for MR remote collaboration

    • Peng Wang
    • Shusheng Zhang
    • Yuxiang Yan

    ORIGINAL ARTICLE 09 November 2019 Pages: 3031 - 3043

    

22. Influence of oxide layer on grinding quality in ELID grinding bearing outer ring raceway with workpiece-cathode

    • Zhiqiang Wang
    • Chengzu Ren
    • Chunhui Ji

    ORIGINAL ARTICLE 09 November 2019 Pages: 3045 - 3056

    

23. Servo control optimization of micro discharge gap and its reasonable matching with scanning speed in servo scanning 3D micro EDM based on threshold control method

    • Hao Tong
    • Xueling Liu
    • JunJie Li

    ORIGINAL ARTICLE 09 November 2019 Pages: 3057 - 3066

    

24. Analysis of diamond nanomachining of contact lens polymers using molecular dynamics

    • Muhammad Mukhtar Liman
    • Khaled Abou-El-Hossein
    • Lukman Niyi Abdulkadir

    ORIGINAL ARTICLE 09 November 2019 Pages: 3067 - 3078

    

25. An Improved Grey Wolf Optimizer Algorithm for Energy-Aware Service Composition in Cloud Manufacturing

    • Yefeng Yang
    • Bo Yang
    • Tianguo Jin

    ORIGINAL ARTICLE 09 November 2019 Pages: 3079 - 3091

    

26. Instrumented clamping device and numerical simulations to study machining distortion

    • Iheb Cherif
    • Dominique Cotton
    • Joana Rebelo Kornmeier

    ORIGINAL ARTICLE 10 November 2019 Pages: 3093 - 3103

    

27. Mathematical temperature model of sheet metal in friction stir incremental forming

    • Lihua Li
    • Jin Wang

    ORIGINAL ARTICLE 10 November 2019 Pages: 3105 - 3116

    

28. Analysis of the tool nose radius influence in the machining of a green ceramic material

    • Marcos Gonçalves Júnior
    • Luiz Eduardo de Angelo Sanchez
    • Cesar Renato Foschini

    ORIGINAL ARTICLE 10 November 2019 Pages: 3117 - 3125

    

29. Improvement of measurement resolution of a mechanical touch-trigger probe method for static radial runout measurements based on digital image correlation

    • Jianlong Zhao
    • Yong Sang
    • Xiaomeng Ji

    ORIGINAL ARTICLE 10 November 2019 Pages: 3127 - 3136

    

30. Study on manufacturing quality of micro-ultrasonic machining with force control

    • Junfeng He
    • Zhongning Guo
    • Xiaolei Chen

    ORIGINAL ARTICLE 10 November 2019 Pages: 3137 - 3146

    

31. The effect of wire feed geometry on electron beam freeform 3D printing of complex-shaped samples from Ti-6Al-4V alloy

    • K. N. Kalashnikov
    • V. E. Rubtsov
    • A. V. Chumaevskii

    ORIGINAL ARTICLE 10 November 2019 Pages: 3147 - 3156

    

32. An assessment for a new approach to pulsating lubrication strategy (PLS) in end milling

    • M.S.A Hafiz
    • M.S Kasim
    • M.F Jaafar

    ORIGINAL ARTICLE 10 November 2019 Pages: 3157 - 3163

    

33. A novel method for tool condition monitoring based on long short-term memory and hidden Markov model hybrid framework in high-speed milling Ti-6Al-4V

    • Zhengrui Tao
    • Qinglong An
    • Ming Chen

    ORIGINAL ARTICLE 10 November 2019 Pages: 3165 - 3182

    

34. Sustainability of surface treatment of natural fibre in composite formation: challenges of environment-friendly option

    • Oludaisi Adekomaya
    • Thokozani Majozi

    ORIGINAL ARTICLE 10 November 2019 Pages: 3183 - 3195

    

35. Temperature distribution of cubic boron nitride–coated cutting tools by finite element analysis

    • Luqiang Tu
    • Feng Xu
    • Dunwen Zuo

    ORIGINAL ARTICLE 11 November 2019 Pages: 3197 - 3207

    

36. Investigation of the key process parameters in the hot forming of a shackle

    • J. Cochet
    • S. Thuillier
    • P. Y. Manach

    ORIGINAL ARTICLE 11 November 2019 Pages: 3209 - 3219

    

37. Effect of substrate material on the molten pool characteristics in selective laser melting of thin wall parts

    • Shiwen Liu
    • Shijie Chang
    • Xiaoyan Zeng

    ORIGINAL ARTICLE 11 November 2019 Pages: 3221 - 3231

    

38. Experimental investigation of the application of parameter inversion for residual stress adjustment in five-axis milling using an annular cutter

    • Kun Huang
    • Wenyu Yang
    • Xiaoming Ye

    ORIGINAL ARTICLE 11 November 2019 Pages: 3233 - 3247

    

39. Application of in situ post weld heat treatment using double pulse technology and its effect on microstructure and mechanical performance of resistance spot welded HSLA350 steel

    • Imtiaz Ali Soomro
    • Srinivasa Rao Pedapati

    ORIGINAL ARTICLE 11 November 2019 Pages: 3249 - 3260

    

40. Optimal design of cathode based on iterative solution of multi-physical model in pulse electrochemical machining (PECM)

    • Ming Fang
    • Yuanlong Chen
    • Yi Liang

    ORIGINAL ARTICLE 11 November 2019 Pages: 3261 - 3270

    

41. A stability prediction method research for milling processes based on implicit multistep schemes

    • Yi Wu
    • Youpeng You
    • Jianjun Jiang

    ORIGINAL ARTICLE 12 November 2019 Pages: 3271 - 3288

    

42. A review of basic crystallography and x-ray diffraction applications

    • E. S. Ameh

    ORIGINAL ARTICLE 12 November 2019 Pages: 3289 - 3302

    

43. Machinability of titanium alloy through laser machining: material removal and surface roughness analysis

    • Naveed Ahmed
    • Shafiq Ahmad
    • Mazen Zaindin

    ORIGINAL ARTICLE 12 November 2019 Pages: 3303 - 3323

    

44. Minimizing wrinkling formation of GPa-grade steels in multi-stage crash forming process

    • Chanhee Won
    • Dongjin Kim
    • Jonghun Yoon

    ORIGINAL ARTICLE 12 November 2019 Pages: 3325 - 3335

    

45. Mechanical characterisation of stainless steel parts produced by direct metal laser sintering with virgin and reused powder

    • V. Contaldi
    • F. Del Re
    • P. Di Petta

    ORIGINAL ARTICLE 12 November 2019 Pages: 3337 - 3351

    

46. Effects of the die parameters on the self-piercing riveting process

    • Yunpeng Liu
    • Han Li
    • Xianping Liu

    ORIGINAL ARTICLE 12 November 2019 Pages: 3353 - 3368

    

47. Artificial Neural Network Controlled GMAW System: Penetration and Quality Assurance in a Multi-Pass Butt Weld Application

    • Sakari Penttilä
    • Paul Kah
    • Harri Eskelinen

    ORIGINAL ARTICLE Open access 12 November 2019 Pages: 3369 - 3385

    

48. Thermal damage control for dry grinding of MgO/CeO₂ glass ceramic

    • Meina Qu
    • Tan Jin
    • Ange Lu

    ORIGINAL ARTICLE 12 November 2019 Pages: 3387 - 3396

    

49. The influence of welding polarity on mechanical properties, microstructure and residual stresses of gas tungsten arc welded AA5052

    • Ardeshir Sarmast
    • Siamak Serajzadeh

    ORIGINAL ARTICLE 12 November 2019 Pages: 3397 - 3409

    

50. The manufacturability and compression properties of the Schwarz Diamond type Ti6Al4V cellular lattice fabricated by selective laser melting

    • Joanna Maszybrocka
    • Bartosz Gapiński
    • Andrzej Stwora

    ORIGINAL ARTICLE Open access 12 November 2019 Pages: 3411 - 3425