1. Numerical simulation of part-level temperature fields during selective laser melting of stainless steel 316L

   • Zhibo Luo
   • Yaoyao Zhao

   ORIGINAL ARTICLE 11 June 2019 Pages: 1615 - 1635

   

2. Design, analysis, and implementation of a new adaptive chatter control system in internal turning

   • Mohsen Fallah
   • Behnam Moetakef-Imani

   ORIGINAL ARTICLE 11 June 2019 Pages: 1637 - 1659

   

3. Modelling of the temperature and residual stress fields during 3D printing of polymer composites

   • A. El Moumen
   • M. Tarfaoui
   • K. Lafdi

   ORIGINAL ARTICLE 12 June 2019 Pages: 1661 - 1676

   

4. A study on micro-machining spinel by applying ordinary cutting and ultra-sonic elliptical vibration cutting

   • Zhuoqi Shi
   • Bing Guo
   • Tianyu Ji

   ORIGINAL ARTICLE 14 June 2019 Pages: 1677 - 1692

   

5. The practical exploitation of tacit machine tool intelligence

   • Jacob L. Hill
   • Paul W. Prickett
   • Gareth Hankins

   ORIGINAL ARTICLE Open access 14 June 2019 Pages: 1693 - 1707

   

6. A review of friction stir–based processes for joining dissimilar materials

   • Kai Chen
   • Xun Liu
   • Jun Ni

   ORIGINAL ARTICLE 14 June 2019 Pages: 1709 - 1731

   

7. NiAl intermetallic composites—a review of processing methods, reinforcements and mechanical properties

   • Mary A. Awotunde
   • Olusoji O. Ayodele
   • Peter A. Olubambi

   ORIGINAL ARTICLE 16 June 2019 Pages: 1733 - 1747

   

8. Microstructure, forming limit diagram, and strain distribution of pre-strained DP-IF steel tailor–welded blank for auto body application

   • Shamik Basak
   • Bhupesh Singh Katiyar
   • Sushanta Kumar Panda

   ORIGINAL ARTICLE 17 June 2019 Pages: 1749 - 1767

   

9. Intelligent selective disassembly planning based on disassemblability characteristics of product components

   • Soran Parsa
   • Mozafar Saadat

   ORIGINAL ARTICLE Open access 18 June 2019 Pages: 1769 - 1783

   

10. Response surface methodology for advanced manufacturing technology optimization: theoretical fundamentals, practical guidelines, and survey literature review

    • Lucas Guedes de Oliveira
    • Anderson Paulo de Paiva
    • Paulo Henrique da Silva Campos

    ORIGINAL ARTICLE 18 June 2019 Pages: 1785 - 1837

    

11. Research on the fabrication and grinding performance of 3-dimensional controllable abrasive arrangement wheels

    • Yanfei Qiu
    • Hui Huang

    ORIGINAL ARTICLE 19 June 2019 Pages: 1839 - 1853

    

12. Optimization of cutter orientation for multi-axis NC machining based on minimum energy consumption of motion axes

    • Baohai Wu
    • Mancang Liang
    • Ying Zhang

    ORIGINAL ARTICLE 19 June 2019 Pages: 1855 - 1867

    

13. Extending lean frontiers: a kaizen case study in an Italian MTO manufacturing company

    • Matteo Rossini
    • Francesco Audino
    • Alberto Portioli-Staudacher

    ORIGINAL ARTICLE 20 June 2019 Pages: 1869 - 1888

    

14. A review of machine learning for the optimization of production processes

    • Dorina Weichert
    • Patrick Link
    • Stefan Wrobel

    ORIGINAL ARTICLE 20 June 2019 Pages: 1889 - 1902

    

15. On the performance of CUSUM control charts for monitoring the coefficient of variation with measurement errors

    • Kim Phuc Tran
    • Huu Du Nguyen
    • Cédric Heuchenne

    ORIGINAL ARTICLE 20 June 2019 Pages: 1903 - 1917

    

16. Analytical models for cycle time and throughput evaluation of multi-shuttle deep-lane AVS/RS

    • Gianluca D’Antonio
    • Paolo Chiabert

    ORIGINAL ARTICLE 21 June 2019 Pages: 1919 - 1936

    

17. Capillary penetration mechanism and oil mist concentration of Al₂O₃ nanoparticle fluids in electrostatic minimum quantity lubrication (EMQL) milling

    • Xuefeng Xu
    • Tao Lv
    • Xiaodong Hu

    ORIGINAL ARTICLE 22 June 2019 Pages: 1937 - 1951

    

18. In-process complex machining condition monitoring based on deep forest and process information fusion

    • Zhiyuan Lu
    • Meiqing Wang
    • Jiahuan Sun

    ORIGINAL ARTICLE 22 June 2019 Pages: 1953 - 1966

    

19. Real-time simulation for long paths in laser-based additive manufacturing: a machine learning approach

    • Emmanuel Stathatos
    • George-Christopher Vosniakos

    ORIGINAL ARTICLE 22 June 2019 Pages: 1967 - 1984

    

20. Process investigation and mechanical properties of electro sinter forged (ESF) titanium discs

    • Emanuele Cannella
    • Chris Valentin Nielsen
    • Niels Bay

    ORIGINAL ARTICLE 22 June 2019 Pages: 1985 - 1998

    

21. Numerical analysis of coolant flow in the grinding zone

    • Wojciech Stachurski
    • Jacek Sawicki
    • Krzysztof Nadolny

    ORIGINAL ARTICLE Open access 25 June 2019 Pages: 1999 - 2012

    

22. Process and resource selection methodology in design for additive manufacturing

    • Shervin Kadkhoda-Ahmadi
    • Alaa Hassan
    • Elnaz Asadollahi-Yazdi

    ORIGINAL ARTICLE 25 June 2019 Pages: 2013 - 2029

    

23. Prediction of safe zone for osteonecrosis in the cutting process of bovine cortical femur bone using Arbitrary Lagrangian-Eulerian method and multi-objective optimization

    • B. Saghafi
    • M. Ghoreishi
    • K. Narooei

    ORIGINAL ARTICLE 25 June 2019 Pages: 2031 - 2043

    

24. Multilevel structured NC machining process model based on dynamic machining feature for process reuse

    • Rui Huang
    • Junfeng Jiang
    • Shusheng Zhang

    ORIGINAL ARTICLE 25 June 2019 Pages: 2045 - 2060

    

25. Ultrasonic on-machine scanning for thickness measurement of thin-walled parts: modeling and experiments

    • Meng Lian
    • Haibo Liu
    • Yongqing Wang

    ORIGINAL ARTICLE 25 June 2019 Pages: 2061 - 2072

    

26. A novel time-rounding-up-based feedrate scheduling method based on S-shaped ACC/DEC algorithm

    • Hepeng Ni
    • Chengrui Zhang
    • Yanan Liu

    ORIGINAL ARTICLE 25 June 2019 Pages: 2073 - 2088

    

27. Advanced mechanical characterization of friction stir welds made on polycarbonate

    • F. Lambiase
    • V. Grossi
    • A. Paoletti

    ORIGINAL ARTICLE 26 June 2019 Pages: 2089 - 2102

    

28. Mode coupling chatter prediction and avoidance in robotic machining process

    • Orm Gienke
    • Zengxi Pan
    • Stephen Van Duin

    ORIGINAL ARTICLE 26 June 2019 Pages: 2103 - 2116

    

29. Effect of selective laser melting process parameters on microstructure and mechanical properties of 316L stainless steel helical micro-diameter spring

    • Mingji Huang
    • Zongxin Zhang
    • Ping Chen

    ORIGINAL ARTICLE 26 June 2019 Pages: 2117 - 2131

    

30. A methodology of setting module groups for the design of reconfigurable machine tools

    • Yongquan Wang
    • Guangpeng Zhang
    • Lina Han

    ORIGINAL ARTICLE 26 June 2019 Pages: 2133 - 2147

31. A novel method to reduce the distortion of ridged rectangular tube in H-typed rotary draw bending

    • Chunmei Liu
    • Yuli Liu
    • Hong Sun

    ORIGINAL ARTICLE 26 June 2019 Pages: 2149 - 2161

    

32. Surface integrity of INCONEL 718 turned under cryogenic conditions at high cutting speeds

    • Willians Heleno Pereira
    • Sergio Delijaicov

    ORIGINAL ARTICLE 26 June 2019 Pages: 2163 - 2177

    

33. High speed blending motion trajectory planning using a predefined absolute accuracy

    • Wen-Chuan Chen
    • Chin-Sheng Chen
    • Li -Yeh Chen

    ORIGINAL ARTICLE 26 June 2019 Pages: 2179 - 2193

    

34. Vibration signal analysis using symbolic dynamics for gearbox fault diagnosis

    • Ruben Medina
    • Jean-Carlo Macancela
    • Rafael E. Vásquez

    ORIGINAL ARTICLE 27 June 2019 Pages: 2195 - 2214

    

35. Self-supporting overhang structures produced by additive manufacturing through electron beam melting

    • Wadea Ameen
    • Abdulrahman Al-Ahmari
    • Muneer Khan Mohammed

    ORIGINAL ARTICLE 28 June 2019 Pages: 2215 - 2232

    

36. Measures towards roll forming at the physical limit of energy consumption

    • Tilman Traub
    • Burcu Güngör
    • Peter Groche

    ORIGINAL ARTICLE 28 June 2019 Pages: 2233 - 2245

    

37. Mechanical analysis of local cutting forces and transient state when drilling of heat-resistant austenitic stainless steel

    • Rabiae Arif
    • Guillaume Fromentin
    • Bertrand Marcon

    ORIGINAL ARTICLE 29 June 2019 Pages: 2247 - 2258

    

38. Improving the cutting rate in turning operations of flexible stepped shafts with a linear parameter-varying controller using the electromagnetic actuator

    • Rajiv Kumar Vashisht
    • Qingjin Peng

    ORIGINAL ARTICLE 01 July 2019 Pages: 2259 - 2271

    

39. Comprehensive energy-saving method for sheet metal forming

    • Mengdi Gao
    • Qingyang Wang
    • Conghu Liu

    ORIGINAL ARTICLE 02 July 2019 Pages: 2273 - 2285

    

40. Constitutive modeling and deformation analysis for the ultrasonic-assisted incremental forming process

    • Yanle Li
    • Zinan Cheng
    • Jens Twiefel

    ORIGINAL ARTICLE 02 July 2019 Pages: 2287 - 2299

    

41. Effects of machining conditions on the hole wall delamination in both conventional and ultrasonic-assisted CFRP drilling

    • Chao Qun Wu
    • Guang Lei Gao
    • Hao Luo

    ORIGINAL ARTICLE 02 July 2019 Pages: 2301 - 2315

    

42. A forward closed-loop virtual simulation system for milling process considering dynamics processing-machine interactions

    • Wanqun Chen
    • Zhen Tong
    • Xiangqian Jiang

    ORIGINAL ARTICLE 03 July 2019 Pages: 2317 - 2328

    

43. A mechatronic approach for ball screw drive system: modeling, control, and validation on an FPGA-based architecture

    • M. A. Vargas-Treviño
    • J. Lopez-Gomez
    • P. Garcia-Ramirez

    ORIGINAL ARTICLE 03 July 2019 Pages: 2329 - 2346

    

44. A rapid method for grain growth of Ti6Al4V alloy and its machinability

    • Zejia Zhao
    • Suet To
    • Zhuoxuan Zhuang

    ORIGINAL ARTICLE 04 July 2019 Pages: 2347 - 2361

    

45. Milling force of quartz fiber–reinforced polyimide composite based on cryogenic cooling

    • Fengbiao Wang
    • Zhang Bin
    • Yongqing Wang

    ORIGINAL ARTICLE 04 July 2019 Pages: 2363 - 2375

    

46. Experimental analysis of the flow drill screw driving process

    • Fadik Aslan
    • Laurent Langlois
    • Tudor Balan

    ORIGINAL ARTICLE 05 July 2019 Pages: 2377 - 2388

    

47. Extraction of weak fault using combined dual-tree wavelet and improved MCA for rolling bearings

    • Yanfei Lu
    • Rui Xie
    • Steven Y. Liang

    ORIGINAL ARTICLE 05 July 2019 Pages: 2389 - 2400

    

48. Effects of WC grain size and Co content on microscale wear behavior of micro end mills in aluminum alloy 7075 machining

    • Peng Gao
    • Xibin Wang
    • Jiaqing Xie

    ORIGINAL ARTICLE 05 July 2019 Pages: 2401 - 2413

    

49. A study of wear on focusing tubes exposed to corundum-based abrasives in the waterjet cutting process

    • Andrzej Perec
    • Frank Pude
    • Konrad Wegener

    ORIGINAL ARTICLE 06 July 2019 Pages: 2415 - 2427

    

50. Study of undeformed chip and cap geometries at three machining stages in the orbital drilling process

    • Lan Zhou
    • Guosheng An
    • Huiyue Dong

    ORIGINAL ARTICLE 06 July 2019 Pages: 2429 - 2445