Microstructology: The Realistic and Quantitative Description of Microstructural Evolution R. T. DeHoff Society 21 November 2012 Pages: 244 - 258
Introducing the Editorial Board of Metallography, Microstructure, and Analysis Editorial 21 November 2012 Pages: 195 - 198
The Tensile Properties of Pearlite, Bainite, and Spheroidite M. GensamerE. B. PearsallJ. R. Low Jr. Classic Paper 13 October 2012 Pages: 171 - 189
Introduction to “The Tensile Properties of Pearlite, Bainite, and Spheroidite,” Transactions of the American Society for Metals, Vol. 30, Dec 1942, pp. 983–1020 by M. Gensamer, E. B. Pearsall, W. S. Pellini, and J. R. Low Jr. Classic Paper 19 September 2012 Pages: 170 - 170
TTP Curves and Microstructural Evolution Mechanism After Quenching in Aluminum Alloy 6082 Meng GaoMengjun WangGuangyao Li Technical Article 02 October 2012 Pages: 165 - 169
Microstructural Evolution of Cr-Rich ODS Steels as a Function of Heat Treatment at 475 °C Zvi FoxmanOded SobolLouisa Meshi Technical Article 22 September 2012 Pages: 158 - 164
Microstructures, Mechanical Properties, and Erosion Resistance of Unbalanced Magnetron Sputtering Deposited TiN/VN Nano-structured Coatings Qi YangMariusz BielawskiRobert C. McKellar Technical Article 15 September 2012 Pages: 150 - 157
High Temperature Oxidation of Pt–Al–Cr–Ru Alloy: Scale Morphology and Adherence J. K. OdusoteL. A. CornishJ. M. Papo Technical Article 07 September 2012 Pages: 142 - 149
A Transmission Electron Microscopy Investigation of Reaustenitized-and-Cooled HSLA-100 Steel S. W. Thompson Technical Article 17 October 2012 Pages: 131 - 141
Introducing the Editorial Board of Metallography, Microstructure, and Analysis Editorial 25 September 2012 Pages: 127 - 130
Fracture Modes and Mechanical Characteristics of Machinable Brass Rods George A. PantazopoulosAnagnostis I. Toulfatzis Technical Article 15 August 2012 Pages: 106 - 114
Enhancing the Corrosion Resistance of Near-Stoichiometric Ni4Mo Alloy by Doping with Yttrium H. M. Tawancy Technical Article 02 August 2012 Pages: 99 - 105
Effect of Process Parameters on Pulsed-Laser Repair of a Directionally Solidified Superalloy Leijun LiAndrew DeceusterChunbo Zhang Technical Article 26 July 2012 Pages: 92 - 98
Analysis of Design of Experiments Methodology for Optimization of Pulsed Current GTAW Process Parameters for Ultimate Tensile Strength of UNS S32760 Welds M. YousefiehM. ShamanianA. R. Arghavan Technical Article 26 July 2012 Pages: 85 - 91
Improvement of the Hydrogen Microprint Technique on AHSS Steels J. A. RonevichJ. G. SpeerD. K. Matlock Technical Article 03 June 2012 Pages: 79 - 84
Materials Data for Modeling, Simulation, and Analysis Scott D. Henry Guest Editorial 28 August 2012 Pages: 77 - 78
SEM for the 21st Century: Scanning Ion Microscopy David C. Joy Feature 28 March 2012 Pages: 115 - 121
Application of Chords for Quantitative Characterization of Multi-Constituent Microstructures Shenjia ZhangKip O. Findley Technical Article 29 February 2012 Pages: 28 - 34
Three Dimensional (3D) Microstructural Characterization and Quantitative Analysis of Solidified Microstructures in Magnesium-Based Alloys M. Y. WangJ. J. WilliamsN. Chawla Technical Article 29 February 2012 Pages: 7 - 13
Full-Thickness Decarburization of the Steel Shell of an Annealing Furnace A. M. Dalley Technical Note 28 February 2012 Pages: 59 - 64
Contributions of Light Microscopy to Contemporary Materials Characterization: The New Directional Solidification Lawrence E. MurrEdwin MartinezDiana A. Ramirez Technical Article 28 February 2012 Pages: 45 - 58
Microstructures for Two-Phase Gamma Titanium Aluminide Fabricated by Electron Beam Melting Jennifer HernandezLawrence E. MurrRyan B. Wicker Technical Article 28 February 2012 Pages: 14 - 27
Reflections on Microscopy and Analysis: From Viewing the Small World to Leading on a Larger Stage David B. Williams Letter to the Editor 23 February 2012 Pages: 3 - 6
Metallography, Microstructure, and Analysis: Birth of a New Journal Ryan M. Deacon Editorial 16 February 2012 Pages: 1 - 2
Microstructural Analysis of a Silver-Plated Trombone Christopher MarvelWill LentheJohn Logan Feature 08 March 2012 Pages: 73 - 75
The Origin and History of the International Metallographic Society Steve Dekanich Society 09 March 2012 Pages: 65 - 69
Role of Rhenium on Solidification, Microstructure, and Mechanical Properties of Standard Alloy 718 Nader El-BagouryAdel A. OmarK. Ogi Technical Article 20 March 2012 Pages: 35 - 44
