1. Structural Studies of Dispersoids in Fe–15 wt% Y₂O₃–5 wt% Ti Model ODS Alloys During Milling and Subsequent Annealing

   • Pradyumna Kumar Parida
   • Arup Dasgupta
   • S. Saroja

   Technical Paper 08 June 2016 Pages: 1409 - 1415

   

2. Effect of Tool Geometry on Material Flow Behavior of Refill Friction Stir Spot Welding

   • Shude Ji
   • Yue Wang
   • Peng Chai

   Technical Paper 02 August 2016 Pages: 1417 - 1430

   

3. The effect of Mn on the structural and magnetic behaviour of Fe–6Si–8B alloy produced by high energy ball Milling

   • Nand Kishore Prasad
   • Krishna Murari Agrawal
   • Nilay Krishna Mukhopadhyay

   Technical Paper 02 August 2016 Pages: 1431 - 1436

   

4. Effects of Pore Nucleation, Growth and Solidification Mode on Pore Structure and Distribution of Lotus Type Porous Copper

   • Q. L. Song
   • Q. L. Jin
   • R. Zhou

   Technical Paper 18 August 2016 Pages: 1437 - 1445

   

5. Effects of Austenitization Temperature and Compressive Stress During Bainitic Transformation on the Stability of Retained Austenite

   • Mingxing Zhou
   • Guang Xu
   • Bei He

   Technical Paper 11 August 2016 Pages: 1447 - 1453

   

6. Effect of Oxide Fluxes on Depth of Penetration in Flux Bounded Tungsten Inert Gas Welding of AISI 304L Stainless Steel

   • G. Venkatesan
   • V. Muthupandi
   • Abdul Bari Fathaha

   Technical Paper 20 August 2016 Pages: 1455 - 1462

   

7. On Plastic Deformation Behavior of Cryorolled AA8090 Alloy

   • K. S. V. B. R. Krishna
   • M. Ashfaq
   • Sarma S. R. Akella

   Technical Paper 19 August 2016 Pages: 1463 - 1475

   

8. Initial Stage Oxidation and Surface Morphology of Modified 9Cr–1Mo Steel at High Temperatures in Air

   • M. Archana
   • S. Ningshen
   • U. Kamachi Mudali

   Technical Paper 09 July 2016 Pages: 1477 - 1489

   

9. Multi-objective Optimization of Welding Parameters in MMAW for Nano-structured Hardfacing Material Using GRA Coupled with PCA

   • Abhijit Saha
   • Subhas Chandra Mondal

   Technical Paper 18 August 2016 Pages: 1491 - 1502

   

10. Structural, Morphological, Opto-Electrical and Photoluminescence Studies of Nanoplate Structured Zn-Doped Sn₂S₃ Thin Films

    • S. Joshua Gnanamuthu
    • S. Johnson Jeyakumar
    • A. R. Balu

    Technical Paper 11 August 2016 Pages: 1503 - 1509

    

11. Hydroxyapatite and Fluoridated Hydroxyapatite Coatings and Their Effects on Commercially Pure Magnesium Corrosion Response

    • Seyed Morteza Ghaffari Shahri
    • Mahtab Assadian
    • Mohd Hasbullah Idris

    Technical Paper 20 August 2016 Pages: 1511 - 1518

    

12. Evaluation of Metal Dusting Behavior in Reformer Tube Made of HP–Nb Alloy on the Outer Surfaces

    • A. M. Shabani
    • T. Jalal
    • M. Monir Vaghefi

    Technical Paper 22 August 2016 Pages: 1519 - 1525

    

13. A Theoretical Study of Indentation with an Oblate Spheroid Shape

    • A. Boudilmi
    • K. Loucif

    Technical Paper 27 August 2016 Pages: 1527 - 1531

    

14. Alkaline Electrodeposition of Ni–ZnO Nanocomposite Coatings: Effects of Pulse Electroplating Parameters

    • M. Sajjadnejad
    • N. Setoudeh
    • H. Omidvar

    Technical Paper 03 September 2016 Pages: 1533 - 1541

    

15. Synthesis of YVO₄:Eu³⁺ Nanophosphors Through the Use of Urea and Aniline Fuels and Study of Their Microstructures and Optical Properties

    • Seyed Mahdi Rafiaei

    Technical Paper 01 September 2016 Pages: 1543 - 1547

    

16. A Numerical Approach to Investigate the Effect of Temperature on Constraint Factor of Ti Alloy Under Static Indentation Conditions

    • Ambuj Saxena
    • Akshay Rai
    • A. Kumaraswamy

    Technical Paper 31 August 2016 Pages: 1549 - 1553

    

17. On the Microstructure and Wear Behavior of Fe–xCr–4Mn–3C Hardfacing Alloys

    • Yogesh Kumar Singla
    • Rahul Chhibber
    • Kishore Khanna

    Technical Paper 02 September 2016 Pages: 1555 - 1561

    

18. Impact of Carbon Seam on Freeze Profile in Aluminum Reduction Cell

    • Amit Gupta
    • Sankar Namboothiri

    Technical Paper 08 September 2016 Pages: 1563 - 1574

    

19. Correlation of Tensile Properties and Strain Hardening Behavior with Martensite Volume Fraction in Dual-Phase Steels

    • H. Ashrafi
    • M. Shamanian
    • N. Saeidi

    Technical Paper 06 September 2016 Pages: 1575 - 1584

    

20. Experimental Investigations on Slurry Erosion Behaviour of HVOF and HVOLF Sprayed Coatings on Hydraulic Turbine Steel

    • Harjinder Singh
    • Khushdeep Goyal
    • Deepak Kumar Goyal

    Technical Paper 09 September 2016 Pages: 1585 - 1592

    

21. Aqueous Dispersions of Latex Compounding Ingredients by Wet Ball Milling: Effect of Ball Size and Milling Time on Dispersion Quality

    • K. Anand
    • Siby Varghese
    • Thomas Kurian

    Technical Paper 17 September 2016 Pages: 1593 - 1600

    

22. Crystallization Behavior and Damage Mechanism of Mineral Wool Fibers When Heated

    • Tie-Lei Tian
    • Yu-Zhu Zhang
    • Zun-Qian Zhang

    Technical Paper 21 September 2016 Pages: 1601 - 1606

    

23. Effect of Environmental Pollution on Corrosion Characteristics of 3003 Aluminium Alloy Exposed in Different Parts of India

    • Achal Pandya
    • D. Saha
    • D. D. N. Singh

    Technical Paper 21 September 2016 Pages: 1607 - 1620

    

24. Characterization of Microstructure and Nonmetallic Inclusions of Double V Grooved Armour Steel Weld Metal Through Developed Coated Electrode

    • A. K. Pramanick
    • H. Das
    • T. K. Pal

    Technical Paper 05 October 2016 Pages: 1621 - 1633

    

25. Fabrication and Characterization of Hot Rolled and Hot Extruded Boron Carbide (B₄C) Reinforced A356 Aluminum Alloy Matrix Composites Produced by Stir Casting Method

    • Meghdad Khademian
    • Ali Alizadeh
    • Alireza Abdollahi

    Technical Paper 21 September 2016 Pages: 1635 - 1646

    

26. Development of Microalloyed Steels Through Thin Slab Casting and Rolling (TSCR) Route

    • Diptak Bhattacharya
    • Siddhartha Misra

    Technical Paper 30 September 2016 Pages: 1647 - 1659

    

27. Prediction of Iron Ore Sinter Properties Using Statistical Technique

    • Vikash Kumar
    • S. D. S. S. Sairam
    • P. C. Mahapatra

    Technical Paper 22 September 2016 Pages: 1661 - 1670

    

28. Mechanical Alloying and Characterization of Cu₇₀Ti₂₀Ni₁₀ and Cu₇₀Ti₂₀Ni₁₀-Alumina Nanocomposite

    • M. Baghani
    • M. Aliofkhazraei
    • M. Askari

    Technical Paper 03 October 2016 Pages: 1671 - 1680