Absence of ultrasonic-vibration-induced plasticity in metallic glacial glasses
Authors (first, second and last of 13)
Online first articles
Articles not assigned to an issue 56 articles
-
-
Z-scheme Bi4O5Br2/NH2-MIL-125(Ti) heterojunctions enable exceptional visible photocatalytic degradation of organic pollutant
Authors (first, second and last of 9)
-
One-step pore diffusion mechanism of Li+ in solid electrolyte interphase for fast-charging lithium-ion battery
Authors (first, second and last of 4)
-
PVP/PAN-derived porous carbon fiber for zinc-ion hybrid supercapacitors
Authors (first, second and last of 4)
-
Preparation of three-dimensional nanoporous copper foil with high specific surface area
Authors (first, second and last of 9)
-
Highly reversible Zn anode enabled by anticatalytic carbon layer with suppressed hydrogen evolution
Authors (first, second and last of 5)
-
Dual modification of LiNi0.83Co0.11Mn0.06O2 cathode materials by K+ doping and Li3PO4 coating for lithium ions batteries
Authors (first, second and last of 7)
-
Long-wave infrared emission properties of strain-balanced InAs/InxGa1−xAsySb1−y type-II superlattice on different substrates
Authors (first, second and last of 9)
-
Optical and electrical anisotropy regulation engineering of low-dimensional materials toward polarized detection and imaging applications
Authors (first, second and last of 10)
-
-
Metal complexes of bipyridine-functionalized covalent organic frameworks as efficient electrocatalysts for oxygen evolution reaction
Authors (first, second and last of 9)
-
Well-dispersed Sb particles embedded on N-doped carbon nanofibers toward high-performance Li-ion battery
Authors (first, second and last of 6)
-
Spontaneous anchoring Cl into α-Co(OH)2 as efficient and stable oxygen reduction electrocatalysts for seawater battery
Authors (first, second and last of 9)
-
Phase field modeling of grain stability of nanocrystalline alloys by explicitly incorporating mismatch strain
Authors (first, second and last of 8)
-
Bi2S3 nanofiber bunch for highly efficient CO2 electroreduction to formate at low overpotential
Authors (first, second and last of 5)
-
Enhanced preparation of dendritic metallic vanadium in recyclable NaCl–KCl–VCl2 molten salt by V2CO electrolysis
Authors (first, second and last of 6)
-
Recent advances in Ir/Ru-based perovskite electrocatalysts for oxygen evolution reaction
Authors (first, second and last of 11)
-
Controllable nucleation and deformation of skyrmions on surface of magnetic nanotubular monolayer
Authors (first, second and last of 6)
-
Solid solution strategy modulated defects engineering of (Cr1-xVx)2AlC MAX phase toward superior electromagnetic wave absorption
Authors (first, second and last of 11)
-
NIR-IIb-triggered photodynamic therapy combined with chemotherapy platform based on rare-earth-doped nanoparticles
Authors (first, second and last of 6)
-
Enhancing thermoelectric performance of p-type SnTe through manipulating energy band structures and decreasing electronic thermal conductivity
Authors (first, second and last of 8)
-
Regioselective cation exchange reaction for photoelectrochemical water splitting
Authors (first, second and last of 9)
-
Atomistic study of inverse size effect induced by interfacial plasticity in pearlitic multi-principal element alloy
Authors (first, second and last of 4)
-
Progress and challenges of electrolyte modulation in aqueous zinc-ion batteries
Authors (first, second and last of 4)
-
Robust tantalum tuned perovskite oxygen electrode for reversible protonic ceramic electrochemical cells
Authors (first, second and last of 8)
-
Insights into photocatalytic mechanism over a novel Cu2WS4/MoS2 S-scheme heterojunction
Authors (first, second and last of 10)
-
Coupling N-doping and confined Co3O4 on carbon nanotubes by polydopamine coating strategy for pleiotropic water purification
Authors (first, second and last of 11)
-
Transition metal clusters with precise numbers of atoms anchored on graphdiyne as multifunctional electrocatalysts for OER/ORR/HER: a computational study
Authors (first, second and last of 4)
-
Improvement of impact properties of Al–Si–Mg alloy via solution treatment and joint modification with Sr and La
Authors (first, second and last of 6)
-
Spray pyrolysis-derived W-doped MoSe2/rGO paper-like microspheres: optimization of microstructure and mesostructure for enhanced lithium storage
Authors (first, second and last of 10)
-
Correction to: Electrochemical reconstruction: a new perspective on Sn metal–organic complex microbelts as robust anode for lithium storage
Authors (first, second and last of 10)
-
Correction to: Enhanced cycling stability of single-crystal LiNi0.83Co0.07Mn0.10O2 by Li-reactive coating with H3BO3
Authors (first, second and last of 7)
-
Correction to: Matched MnO@C anode and porous carbon cathode for Li-ion hybrid supercapacitors
Authors (first, second and last of 7)
-
Correction to: Efficient polysulfides conversion on Mo2CTx MXene for high-performance lithium–sulfur batteries
Authors (first, second and last of 6)
-
-
Correction to: Phosphorus-doping and oxygen vacancy endowing anatase TiO2 with excellent sodium storage performance
Authors (first, second and last of 7)
-
Correction to: Ultra-fine Cu clusters decorated hydrangea-like titanium dioxide for photocatalytic hydrogen production
Authors (first, second and last of 10)
-
Correction to: Tuning dual three-dimensional porous copper/graphite composite to achieve diversified utilization of copper current collector for lithium storage
Authors (first, second and last of 10)
-
Correction to: Noble metal-based high-entropy alloys as advanced electrocatalysts for energy conversion
Authors (first, second and last of 11)
-
Correction to: Improving exposure of anodically ordered Ni–Ti–O and corrosion resistance and biological properties of NiTi alloys by substrate electropolishing
Authors (first, second and last of 8)
-
Correction to: Research progress in electron transport layer in perovskite solar cells
Authors (first, second and last of 7)
-
Correction to: Polymer-infiltrated layered silicates for dental restorative materials
Authors (first, second and last of 7)
-
Correction to: Realizing simultaneously enhanced energy and power density full-cell construction using mixed hard carbon/Li4Ti5O12 electrode
Authors (first, second and last of 5)
-
Correction to: Correlation between platinum–aluminide coating features and tensile behavior of nickel-based superalloy Rene®80
Authors (first, second and last of 4)
-
Correction to: Mechanical properties of AM Ti6Al4V porous scaffolds with various cell structures
Authors (first, second and last of 5)
-
Correlation between platinum–aluminide coating features and tensile behavior of nickel-based superalloy Rene®80
Authors (first, second and last of 4)
-
-
Comprehensive tensile properties improved by deep cryogenic treatment prior to aging in friction-stir-welded 2198 Al–Li alloy
Authors (first, second and last of 4)
-
High-temperature oxidation resistance of Si-coated C/SiC composites
Authors (first, second and last of 5)
-
Microstructure and room temperature fracture toughness of Nb–Si-based alloys with Sr addition
Authors (first, second and last of 5)
