1. Phase transformations of 24Cr-14Ni-0.7Si stainless steel under different aging conditions

   • Chih-Chun Hsieh
   • Dong-Yih Lin

   OriginalPaper 26 April 2010 Pages: 155 - 162

2. Effects of temperature and tilt angle on the grain boundary structure in silicon oxide: Molecular dynamics study

   • Sae-Jin Kim
   • Jung-Hae Choi
   • Chan Park

   OriginalPaper 26 April 2010 Pages: 163 - 169

3. Structural characterization of Laves-phase MgZn₂ precipitated in Mg-Zn-Y alloy

   • Woo Jeong Kim
   • Sun Ig Hong
   • Kap Ho Lee

   OriginalPaper 26 April 2010 Pages: 171 - 174

4. RETRACTED ARTICLE: Microstructure of Co precipitation strengthened B2-ordered NiAl

   • Chang-Sup Oh
   • Chang-Suk Han
   • Ju-Hee Lee

   OriginalPaper 26 April 2010 Pages: 175 - 183

5. Thermo-mechanical finite element analysis incorporating the temperature dependent stress-strain response of low alloy steel for practical application to the hot stamped part

   • Hyun-Ho Bok
   • Myoung-Gyu Lee
   • Man-Been Moon

   OriginalPaper 26 April 2010 Pages: 185 - 195

6. Effect of stress state on the high temperature workability of AZ31 Mg alloy

   • Byoung Ho Lee
   • Sun Mi Kim
   • Chong Soo Lee

   OriginalPaper 26 April 2010 Pages: 197 - 203

7. Comparative study on the wear behavior of long and short glass fiber reinforced plastics

   • V. Srinivasan
   • R. Karthikeyan
   • B. Asaithambi

   OriginalPaper 26 April 2010 Pages: 205 - 212

8. Fabrication of Al matrix composite reinforced with submicrometer-sized Al₂O₃ particles formed by combustion reaction between HEMM Al and V₂O₅ composite particles during sintering

   • Kee Do Woo
   • Jae Hwang Kim
   • Zhiguang Liu

   OriginalPaper 26 April 2010 Pages: 213 - 218

9. Properties and synthesis of dense nanostructured VSi₂-SiC by high-frequency induction heated combustion

   • In-Yong Ko
   • Jeong-Hwan Park
   • In-Jin Shon

   OriginalPaper 26 April 2010 Pages: 219 - 223

10. The detection of genomic DNA from bacterial cells using iron oxide nanoparticles synthesized by a hydrothermal process

    • Young-Sung Kim
    • Ki-Chul Kim
    • Tae-Whan Hong

    OriginalPaper 26 April 2010 Pages: 225 - 228

11. Mechanical properties of SiC ceramics sintered with RE₂O₃ (RE: Sc, Lu, Y) and AlN additives

    • B. V. Manoj Kumar
    • Myong-Hoon Roh
    • Sang-Whan Park

    OriginalPaper 26 April 2010 Pages: 229 - 233

12. Comparative evaluation of the abrasive slurry wear behavior of alloy surfaces produced by a Plasma Transferred Arc hardfacing process

    • C. S. Ramachandran
    • V. Balasubramanian
    • R. Varahamoorthy

    OriginalPaper 26 April 2010 Pages: 235 - 246

13. Photoelectrochemical study of the growth of the passive film formed on Fe-20Cr-15Ni in a pH 8.5 buffer solution

    • HeeJin Jang
    • ChanJin Park
    • HyukSang Kwon

    OriginalPaper 26 April 2010 Pages: 247 - 252

14. The effect of ball milling on the ph of Mg-based metals, oxides and Zn in aqueous media

    • Young-Ha Kim
    • Won-Sub Chung
    • Hyun Park

    OriginalPaper 26 April 2010 Pages: 253 - 258

15. Stress corrosion cracking of alloy 600 in an aqueous solution containing lead oxide

    • Dong-Jin Kim
    • Hong Pyo Kim
    • Jangyul Park

    OriginalPaper 26 April 2010 Pages: 259 - 266

16. Primary water stress corrosion cracking in alloy 600 and intergranular crack growth rate

    • Y. C. Jung
    • H. S. Chung
    • N. H. Heo

    OriginalPaper 26 April 2010 Pages: 267 - 271

17. A viscoplastic constitutive model for cyclic hardening in the dynamic strain aging regime

    • Kwangsoo Ho

    OriginalPaper 26 April 2010 Pages: 273 - 280

18. Numerical modeling and analysis of the thermal behavior of copper molds in continuous casting

    • Eun-yi Ko
    • Kyung-Woo Yi
    • Ho-Jung Shin

    OriginalPaper 26 April 2010 Pages: 281 - 288

19. Room temperature ferroelectric property of BiMnO₃ thin film with double SrTiO₃ buffer layers on Pt/Ti/SiO₂/Si substrate

    • J. Y. Son
    • C. S. Park
    • Hyungjun Kim

    OriginalPaper 26 April 2010 Pages: 289 - 292

20. Use of novel chemical dipping method for the stability evaluation of an ultrathin TaN_x barrier in Cu interconnects

    • Sung Gyu Pyo

    OriginalPaper 26 April 2010 Pages: 293 - 297

21. Electrochemical properties of LiNi_0.8Co_0.2−xAl_xO₂ (0≤x≤0.1) cathode particles prepared by spray pyrolysis from the spray solutions with and without organic additives

    • S. H. Ju
    • J. H. Kim
    • Y. C. Kang

    OriginalPaper 26 April 2010 Pages: 299 - 303

22. Development of {110}〈001〉 annealing texture in Al-free and 0.1 %Mn-added 3 %Si-Fe alloy strips containing 95 ppm sulfur

    • N. H. Heo
    • G. G. Yoon

    OriginalPaper 26 April 2010 Pages: 305 - 310

23. Enhancement of the photoluminescence of porous silicon by sputter deposition of semitransparent metal films

    • Chanseok Hong
    • Hohyeong Kim
    • Chongmu Lee

    OriginalPaper 26 April 2010 Pages: 311 - 315

24. Assessment of the crack growth characteristics at the low corrosion fatigue limit of an A106 Gr b steel pipe weld

    • Gyu young Lee
    • Dongho Bae
    • Sunkyu Park

    OriginalPaper 26 April 2010 Pages: 317 - 321

25. Numerical simulation of friction stir spot welding process for aluminum alloys

    • Dongun Kim
    • Harsha Badarinarayan
    • Kwansoo Chung

    OriginalPaper 26 April 2010 Pages: 323 - 332

26. Influence of the number of carboxyl groups on the nucleation of hydroxyapatite

    • Madhav Prasad Neupane
    • Sook Jeong Lee
    • Hyung Seop Kim

    OriginalPaper 26 April 2010 Pages: 333 - 338

27. Rigid-plastic and elastic-plastic finite element analysis on the clinching joint process of thin metal sheets

    • Vishara Jayasekara
    • Kyung Ho Min
    • Beong Bok Hwang

    OriginalPaper 26 April 2010 Pages: 339 - 347