1. Stamping process analysis in an industrial plant and its limitations to obtain an industrializable Continuous Twin

   • Ivan Peinado-Asensi
   • Nicolás Montés
   • Eduardo García

   Manufacturing empowered by digital technologies and twins 10 January 2024 Article: 12

   

2. Finite difference based stress integration algorithm for crystal plasticity finite element method

   • Donghwan Noh
   • Jeong Whan Yoon

   Developments in modelling and simulation..Japan, South Korea and China Open access 04 January 2024 Article: 11

   

3. Identification of material parameters in low-data limit: application to gradient-enhanced continua

   • Duc-Vinh Nguyen
   • Mohamed Jebahi
   • Francisco Chinesta

   Manufacturing empowered by digital technologies and twins 02 January 2024 Article: 10

   

4. Development of a plane strain tensile test to characterize the formability of 5xxx and 6xxx aluminium alloys

   • Maryse Gille
   • Fanny Mas
   • Dominique Daniel

   Original Research 02 January 2024 Article: 9

   

5. Inline closed-loop control of bending angles with machine learning supported springback compensation

   • Dirk Alexander Molitor
   • Viktor Arne
   • Peter Groche

   Original Research Open access 13 December 2023 Article: 8

   

6. Predictive control for a single-blow cold upsetting using surrogate modeling for a digital twin

   • David Uribe
   • Cyrille Baudouin
   • Régis Bigot

   Manufacturing empowered by digital technologies and twins 04 December 2023 Article: 7

   

7. Rapid multi-material joining via flow drill screw process: experiment and FE analysis using the coupled Eulerian‒Lagrangian method

   • Minki Kim
   • Sungho Kim
   • Namsu Park

   Developments in modelling and simulation..Japan, South Korea and China 30 November 2023 Article: 6

   

8. High-reduction radial shear rolling of aluminum alloy bars using custom-calibrated rolls

   • Yu V. Gamin
   • S. P. Galkin
   • I. S. ELDeeb

   Original Research 28 November 2023 Article: 5

   

9. Polymer extrusion die design using a data-driven autoencoders technique

   • Chady Ghnatios
   • Eloi Gravot
   • Francisco Chinesta

   Manufacturing empowered by digital technologies and twins 14 November 2023 Article: 4

   

10. Experimental and numerical study of the closure of voids with different size and various locations in the three-dimensional cogging process

    • Marcin Kukuryk

    Original Research 14 November 2023 Article: 3

    

11. Bending behavior of structured steel sheets with undercuts for interlocking with Al die-cast metal

    • Aron Ringel
    • Gerhard Hirt

    Original Research Open access 09 November 2023 Article: 2

    

12. Unified thermomechanical model of Ti-6Al-4V titanium alloy considering microstructure evolution and damage fracture under different stress state

    • Rui Feng
    • Minghe Chen
    • Lansheng Xie

    Original Research 08 November 2023 Article: 1