1. Process-integrated gas- and spray-quenching for high-strength ductile forged components

   • Thibaud Bucquet
   • Timo Hoja
   • Udo Fritsching

   Review 05 January 2017 Pages: 1 - 10

   

2. Deep drawing behavior of twinning-induced plasticity-cored three-layer steel sheet

   • Seung Mi Baek
   • Jung Gi Kim
   • Hyoung Seop Kim

   Original Research 07 November 2016 Pages: 11 - 18

   

3. Benefits of stress superposition in combined bending-linear flow splitting process

   • P. Groche
   • C. Taplick
   • S. Stahl

   Original Research Open access 19 November 2016 Pages: 19 - 29

   

4. Influence of the forming angle in cross wedge rolling on the multi-directional forging of crankshafts

   • Bernd-Arno Behrens
   • Malte Stonis
   • Neelam Rasche

   Original Research 19 November 2016 Pages: 31 - 41

   

5. Characterization of temperature-dependent tensile and flexural rigidities of a cross-ply thermoplastic lamina with implementation into a forming model

   • Lisa M. Dangora
   • Cynthia Mitchell
   • Jason C. Parker

   Original Research 15 November 2016 Pages: 43 - 52

   

6. A multiphase Eulerian approach for modelling the polymer injection into a textured mould

   • Rebecca Nakhoul
   • Patrice Laure
   • Michel Vincent

   Original Research 19 November 2016 Pages: 53 - 66

   

7. Investigating the effects of cross wedge rolling preforming operation and die forging with flash brakes on forging titanium hip implants

   • Bernd-Arno Behrens
   • Malte Stonis
   • Johannes Richter

   Original Research 10 November 2016 Pages: 67 - 76

   

8. Research on the whole tool mesh reconstruction in the process of springback compensation for auto-body panels

   • Zhihui Gong
   • Zhaobin Zhan
   • Junjia Cui

   Original Research 06 December 2016 Pages: 77 - 85

   

9. Influence of rheological behaviour on extrusion parameters during non-continuous extrusion of multi-base propellants

   • Juan Martinez-Pastor
   • Patricio Franco
   • Pedro J. Lopez-Garcia

   Original Research 21 December 2016 Pages: 87 - 99

   

10. Numerical and experimental investigations of laser shock forming aluminum alloy sheet with mold

    • Xingquan Zhang
    • Yan Zhang
    • Shengzhi Li

    Original Research 27 December 2016 Pages: 101 - 112

    

11. Inverse thermal mold design for injection molds

    • Ch. Hopmann
    • P. Nikoleizig

    Original Research 24 December 2016 Pages: 113 - 124

    

12. Capability of iterative learning control and influence of the material properties on the improvement of the geometrical accuracy in incremental sheet forming process

    • A. Fiorentino
    • G.C. Feriti
    • C. Giardini

    Original Research 21 December 2016 Pages: 125 - 134

    

13. The mechanical response of thermoplastic polyethylene monoliths containing longitudinal microcapillaries

    • D.I. Medina
    • G.J. McShane
    • M.R. Mackley

    Original Research 10 January 2017 Pages: 135 - 147

    

14. Development of a hot stamped channel section with axially tailored properties – experiments and models

    • Kaab Omer
    • Ryan George
    • Duane Detwiler

    Original Research 24 February 2017 Pages: 149 - 164