1. Investigation of Pobeda Furnace Bubbling Zone Physics Using Cold Modeling Method. Part 2. Hydro-Gas Dynamics of Liquid Blowing by Gas Using Bottom Gas-Protected Lance

   • K. V. Bulatov
   • V. P. Zhukov
   • V. A. Menshikov

   METALLURGY OF NONFERROUS METALS 30 April 2022 Pages: 113 - 120

   

2. Extraction of Lithium from Petalite Ore by Chloride Sublimation Roasting

   • I. M. Komelin

   METALLURGY OF NONFERROUS METALS 30 April 2022 Pages: 121 - 131

   

3. Carbide Slag as a Calcium Source for Bauxite Residue Utilization via Calcification–Carbonization Processing

   • Yang Chen
   • Guozhi Lv
   • Xi Chao

   METALLURGY OF NONFERROUS METALS 30 April 2022 Pages: 132 - 145

   

4. Optimal Factor Evaluation for the Extraction of Alumina from Clays by Sulfuric Acid Leaching Process Using Box–Behnken Design Methodology

   • Volkan Arslan

   METALLURGY OF NONFERROUS METALS 30 April 2022 Pages: 146 - 156

   

5. Production and Quality Control of High-Purity Rare-Earth Metal Oxides for Scintillator Crystals of Detecting Medical Systems

   • O. V. Yurasova
   • D. A. Samieva
   • Yu. A. Karpov

   METALLURGY OF RARE AND NOBLE METALS 30 April 2022 Pages: 157 - 166

   

6. The Influence of Multipass Friction Stir Processing on Formation of Microstructure and Mechanical Properties of Ti6Al4V Alloy

   • A. P. Zykova
   • A. V. Vorontsov
   • E. A. Kolubaev

   PRESSURE TREATMENT OF METALS 30 April 2022 Pages: 167 - 176

   

7. Vapor–Liquid Equilibria in the Tin–Lead System in a Primary Vacuum

   • S. A. Trebukhov
   • V. N. Volodin
   • N. M. Burabayeva

   FOUNDRY 30 April 2022 Pages: 177 - 183

   

8. Influence of the Composition of a Boron-Containing Active Medium in the Form of a Coating on the Structure and Properties of the Diffusion Layer of Titanium Parts

   • A. M. Guryev
   • S. G. Ivanov
   • M. V. Loginova

   PHYSICAL METALLURGY AND HEAT TREATMENT 30 April 2022 Pages: 184 - 189

   

9. Effect of Copper Concentration and Annealing Temperature on the Structure and Mechanical Properties of Ingots and Cold-Rolled Sheets of Al–2% Mn Alloy

   • N. O. Korotkova
   • P. K. Shurkin
   • A. A. Aksenov

   PHYSICAL METALLURGY AND HEAT TREATMENT 30 April 2022 Pages: 190 - 200

   

10. Microstructural and Mechanical Properties of A356/Ni Alloys Produced by the Mechanochemical Method

    • Tansel Tunçay

    PHYSICAL METALLURGY AND HEAT TREATMENT 30 April 2022 Pages: 201 - 211

    

11. Analysis of Parametric Influences and Tribological Behaviour of Al 6063–SiC–Al₂O₃

    • P. Rajasekaran

    PHYSICAL METALLURGY AND HEAT TREATMENT 30 April 2022 Pages: 212 - 222

    

12. Effect of Rare Earth Elements on the Microstructural and Mechanical Properties of ZK60 Alloy after T5 Treatment

    • N. Hemati
    • Y. Palizdar
    • H. Torkamani

    PHYSICAL METALLURGY AND HEAT TREATMENT 30 April 2022 Pages: 223 - 236

    

13. In-situ Manufacturing of Al7075/TiO₂, Al7075/SiC and Al7075/TiO₂/SiC Based Composite Layers by Friction Surfacing on Commercially Pure Aluminum

    • S. R. Alavi Zaree
    • M. Khorasanian
    • O. Gholam Mashak

    NANOSTRUCTURED MATERIALS AND FUNCTIONAL COATINGS 30 April 2022 Pages: 237 - 245