An Increase in Process Characteristics of Flotation of Low-Grade Fine-Disseminated Scheelite Ores V. A. IgnatkinaE. D. ShepetaV. A. Bocharov MINERAL PROCESSING OF NONFERROUS METALS 24 January 2020 Pages: 609 - 616
Kinetic Evaluation of the Possibility of Aluminum and Magnesium Recovery from Aqueous Solutions of Their Salts as an Alternative to the Electrolysis of Melts N. V. NemchinovaA. A. Yakovleva METALLURGY OF NONFERROUS METALS 24 January 2020 Pages: 617 - 623
Formation of Side Ledge and Bottom Ledge in an Aluminum Electrolyzer A. M. IvanovaP. A. ArkhipovYu. P. Zaikov METALLURGY OF NONFERROUS METALS 24 January 2020 Pages: 624 - 631
Application of Polarization Measurements for the Calculation of the Current Efficiency V. M. RudoyN. I. OstaninA. I. Cherepanova METALLURGY OF NONFERROUS METALS 24 January 2020 Pages: 632 - 638
Fabrication of Binary Niobium Alloys with Low-Melting Metals by the Deposition of Nanoparticles V. N. VolodinYu. Zh. TuleushevN. M. Burabaeva METALLURGY OF RARE AND NOBLE METALS 24 January 2020 Pages: 639 - 645
Sorption of Scandium from Sulfuric–Chloride Solutions by Activated Carbons Wai Moe AungM. V. MarchenkoI. D. Troshkina METALLURGY OF RARE AND NOBLE METALS 24 January 2020 Pages: 646 - 651
Investigation into the Surface Layer Composition Formed on the Ml19 (Mg–Nd–Y–Zn–Zr) Magnesium Alloy during Melting under Protective Gas Atmospheres V. E. BazhenovA. V. KoltyginV. D. Belov FOUNDRY 24 January 2020 Pages: 652 - 661
Comparative Study of Coatings formed by Electrospark Alloying Using TiC–NiCr and TiC–NiCr– Eu2O3 Electrodes Ph. V. Kiryukhantsev-KorneevA. D. SytchenkoE. A. Levashov PHYSICAL METALLURGY AND HEAT TREATMENT 24 January 2020 Pages: 662 - 672
Phase Composition of D16 and V95 Deformable Aluminum Alloys with the Quantitative Assessment of Metal Burning at Various Stages of Development R. A. Vorob’evS. A. SorokinaV. V. Evstifeeva PHYSICAL METALLURGY AND HEAT TREATMENT 24 January 2020 Pages: 673 - 681
Revisiting Some Prospects for the Further Development of Ideas by Academician V.N. Antsiferov in the Field of Structural Powder Materials V. Yu. Dorofeyev ON THE 85TH ANNIVERSARY OF THE BIRTHDAY OF ACADEMICIAN V.N. ANTSIFEROV 24 January 2020 Pages: 682 - 686
Influence of Gas Atomization Parameters of the KhN60M Alloy on the Powder Characteristics for Laser Surfacing K. V. KalininS. A. OgleznevaM. S. Nagaev PRODUCTION PROCESSES AND PROPERTIES OF POWDERS 24 January 2020 Pages: 687 - 693
Fabrication of Metal Powders for Energy-Intensive Combustible Compositions Using Mechanochemical Treatment: 2. Structure and Reactivity of Mechanically Activated Al–Modifier–SiO2 Mixtures N. N. MofaB. S. SadykovZ. A. Mansurov PRODUCTION PROCESSES AND PROPERTIES OF POWDERS 24 January 2020 Pages: 694 - 703
Influence of Aluminum Additives on the Content and Parameters of the Fine Structure of Titanium Silicon Carbide in SHS Powders T. L. TalakoA. I. LetskoA. A. Smetkin SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS 24 January 2020 Pages: 704 - 709
Magnesiothermal Synthesis and Consolidation of the Multicomponent Powder Ceramics in the Zr–Si–Mo–B System A. N. AstapovYu. S. PogozhevL. N. Rabinskiy SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS 24 January 2020 Pages: 710 - 719
High-Strength Aluminum-Based Composite Materials Reinforced by Microstructures and Nanostructures (Mini Review) A. S. KonopatskyKh. U. YusupovD. V. Shtansky REFRACTORY, CERAMIC, AND COMPOSITE MATERIALS 24 January 2020 Pages: 720 - 729
Influence of the Concentrate of Rare-Earth Elements on the Stabilization of High-Temperature Phases and Properties of the ZrO2–7Y2O3-Based Ceramics V. B. KulmetyevaD. S. Vokhmyanin REFRACTORY, CERAMIC, AND COMPOSITE MATERIALS 24 January 2020 Pages: 730 - 737
Investigation into the Influence of the Structure Dispersion and Homogeneity on the Properties of Powder Metastable Austenitic Carbide Steels and Diamond Tools S. A. OgleznevaK. L. SaenkovA. A. Knyazev REFRACTORY, CERAMIC, AND COMPOSITE MATERIALS 24 January 2020 Pages: 738 - 744
Physicochemical Processes of Fabricating Ceramic Materials Based on Nanopowders of Zirconium, Yttrium, Cerium, and Aluminum Oxides E. N. MakarovaI. V. Antsiferova REFRACTORY, CERAMIC, AND COMPOSITE MATERIALS 24 January 2020 Pages: 745 - 753
Growth Features of Diamond Films on the Tungsten Carbide Surface with a Copper Sublayer D. S. VokhmyaninS. A. Oglezneva NANOSTRUCTURED MATERIALS AND FUNCTIONAL COATINGS 24 January 2020 Pages: 754 - 761
Phase Transformations and Properties of Concentration-Inhomogeneous Magnetic Materials Based on the Fe–30% Cr–27% Co System V. A. KozvoninA. A. ShatsovL. V. Spivak NANOSTRUCTURED MATERIALS AND FUNCTIONAL COATINGS 24 January 2020 Pages: 762 - 769
Structure and Properties of Corrosion-Resistant Steels Fabricated by Selective Laser Melting A. A. SmetkinS. A. OgleznevaE. F. Khanipov MATERIALS AND COATINGS FABRICATED BY ADDITIVE TECHNOLOGIES 24 January 2020 Pages: 770 - 774
Powder Metallurgy in Belarus and Global Developmental Trends P. A. VityazA. Ph. IlyushchankaV. V. Savich APPLICATION OF POWDER MATERIALS AND FUNCTIONAL COATINGS 24 January 2020 Pages: 775 - 781