1. An Increase in Process Characteristics of Flotation of Low-Grade Fine-Disseminated Scheelite Ores

   • V. A. Ignatkina
   • E. D. Shepeta
   • V. A. Bocharov

   MINERAL PROCESSING OF NONFERROUS METALS 24 January 2020 Pages: 609 - 616

   

2. Kinetic Evaluation of the Possibility of Aluminum and Magnesium Recovery from Aqueous Solutions of Their Salts as an Alternative to the Electrolysis of Melts

   • N. V. Nemchinova
   • A. A. Yakovleva

   METALLURGY OF NONFERROUS METALS 24 January 2020 Pages: 617 - 623

   

3. Formation of Side Ledge and Bottom Ledge in an Aluminum Electrolyzer

   • A. M. Ivanova
   • P. A. Arkhipov
   • Yu. P. Zaikov

   METALLURGY OF NONFERROUS METALS 24 January 2020 Pages: 624 - 631

   

4. Application of Polarization Measurements for the Calculation of the Current Efficiency

   • V. M. Rudoy
   • N. I. Ostanin
   • A. I. Cherepanova

   METALLURGY OF NONFERROUS METALS 24 January 2020 Pages: 632 - 638

   

5. Fabrication of Binary Niobium Alloys with Low-Melting Metals by the Deposition of Nanoparticles

   • V. N. Volodin
   • Yu. Zh. Tuleushev
   • N. M. Burabaeva

   METALLURGY OF RARE AND NOBLE METALS 24 January 2020 Pages: 639 - 645

   

6. Sorption of Scandium from Sulfuric–Chloride Solutions by Activated Carbons

   • Wai Moe Aung
   • M. V. Marchenko
   • I. D. Troshkina

   METALLURGY OF RARE AND NOBLE METALS 24 January 2020 Pages: 646 - 651

   

7. Investigation into the Surface Layer Composition Formed on the Ml19 (Mg–Nd–Y–Zn–Zr) Magnesium Alloy during Melting under Protective Gas Atmospheres

   • V. E. Bazhenov
   • A. V. Koltygin
   • V. D. Belov

   FOUNDRY 24 January 2020 Pages: 652 - 661

   

8. Comparative Study of Coatings formed by Electrospark Alloying Using TiC–NiCr and TiC–NiCr– Eu₂O₃ Electrodes

   • Ph. V. Kiryukhantsev-Korneev
   • A. D. Sytchenko
   • E. A. Levashov

   PHYSICAL METALLURGY AND HEAT TREATMENT 24 January 2020 Pages: 662 - 672

   

9. Phase Composition of D16 and V95 Deformable Aluminum Alloys with the Quantitative Assessment of Metal Burning at Various Stages of Development

   • R. A. Vorob’ev
   • S. A. Sorokina
   • V. V. Evstifeeva

   PHYSICAL METALLURGY AND HEAT TREATMENT 24 January 2020 Pages: 673 - 681

   

10. Revisiting Some Prospects for the Further Development of Ideas by Academician V.N. Antsiferov in the Field of Structural Powder Materials

    • V. Yu. Dorofeyev

    ON THE 85TH ANNIVERSARY OF THE BIRTHDAY OF ACADEMICIAN V.N. ANTSIFEROV 24 January 2020 Pages: 682 - 686

    

11. Influence of Gas Atomization Parameters of the KhN60M Alloy on the Powder Characteristics for Laser Surfacing

    • K. V. Kalinin
    • S. A. Oglezneva
    • M. S. Nagaev

    PRODUCTION PROCESSES AND PROPERTIES OF POWDERS 24 January 2020 Pages: 687 - 693

    

12. Fabrication of Metal Powders for Energy-Intensive Combustible Compositions Using Mechanochemical Treatment: 2. Structure and Reactivity of Mechanically Activated Al–Modifier–SiO₂ Mixtures

    • N. N. Mofa
    • B. S. Sadykov
    • Z. A. Mansurov

    PRODUCTION PROCESSES AND PROPERTIES OF POWDERS 24 January 2020 Pages: 694 - 703

    

13. Influence of Aluminum Additives on the Content and Parameters of the Fine Structure of Titanium Silicon Carbide in SHS Powders

    • T. L. Talako
    • A. I. Letsko
    • A. A. Smetkin

    SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS 24 January 2020 Pages: 704 - 709

    

14. Magnesiothermal Synthesis and Consolidation of the Multicomponent Powder Ceramics in the Zr–Si–Mo–B System

    • A. N. Astapov
    • Yu. S. Pogozhev
    • L. N. Rabinskiy

    SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS 24 January 2020 Pages: 710 - 719

    

15. High-Strength Aluminum-Based Composite Materials Reinforced by Microstructures and Nanostructures (Mini Review)

    • A. S. Konopatsky
    • Kh. U. Yusupov
    • D. V. Shtansky

    REFRACTORY, CERAMIC, AND COMPOSITE MATERIALS 24 January 2020 Pages: 720 - 729

    

16. Influence of the Concentrate of Rare-Earth Elements on the Stabilization of High-Temperature Phases and Properties of the ZrO₂–7Y₂O₃-Based Ceramics

    • V. B. Kulmetyeva
    • D. S. Vokhmyanin

    REFRACTORY, CERAMIC, AND COMPOSITE MATERIALS 24 January 2020 Pages: 730 - 737

    

17. Investigation into the Influence of the Structure Dispersion and Homogeneity on the Properties of Powder Metastable Austenitic Carbide Steels and Diamond Tools

    • S. A. Oglezneva
    • K. L. Saenkov
    • A. A. Knyazev

    REFRACTORY, CERAMIC, AND COMPOSITE MATERIALS 24 January 2020 Pages: 738 - 744

    

18. Physicochemical Processes of Fabricating Ceramic Materials Based on Nanopowders of Zirconium, Yttrium, Cerium, and Aluminum Oxides

    • E. N. Makarova
    • I. V. Antsiferova

    REFRACTORY, CERAMIC, AND COMPOSITE MATERIALS 24 January 2020 Pages: 745 - 753

    

19. Growth Features of Diamond Films on the Tungsten Carbide Surface with a Copper Sublayer

    • D. S. Vokhmyanin
    • S. A. Oglezneva

    NANOSTRUCTURED MATERIALS AND FUNCTIONAL COATINGS 24 January 2020 Pages: 754 - 761

    

20. Phase Transformations and Properties of Concentration-Inhomogeneous Magnetic Materials Based on the Fe–30% Cr–27% Co System

    • V. A. Kozvonin
    • A. A. Shatsov
    • L. V. Spivak

    NANOSTRUCTURED MATERIALS AND FUNCTIONAL COATINGS 24 January 2020 Pages: 762 - 769

    

21. Structure and Properties of Corrosion-Resistant Steels Fabricated by Selective Laser Melting

    • A. A. Smetkin
    • S. A. Oglezneva
    • E. F. Khanipov

    MATERIALS AND COATINGS FABRICATED BY ADDITIVE TECHNOLOGIES 24 January 2020 Pages: 770 - 774

    

22. Powder Metallurgy in Belarus and Global Developmental Trends

    • P. A. Vityaz
    • A. Ph. Ilyushchanka
    • V. V. Savich

    APPLICATION OF POWDER MATERIALS AND FUNCTIONAL COATINGS 24 January 2020 Pages: 775 - 781