1. Decomposition of tetrafluorocarbon in dielectric barrier discharge reactor

   • Byung-Ki Na
   • Jae-Wook Choi
   • Hyung Keun Song

   Short Communication Pages: 917 - 920

2. Partial oxidation (POX) reforming of gasoline for fuel-cell powered vehicles applications

   • Dong Ju Moon
   • Jong Woo Ryu
   • Byoung Sung Ahn

   OriginalPaper Pages: 921 - 927

3. Effect of impurities in phosphoric acid on the granulometery of the produced DAP(Di-ammonium PHOSPHATE) in petrochemical plants

   • Bahman ZareNezhad

   OriginalPaper Pages: 928 - 931

4. Catalytic performance of La_0.66Sr_0.34Co_0.2Fe_0.8O₃ perovskite in propane combustion: Effect of preparation and specific surface area

   • Danilo Klvana
   • Kwang Sup Song
   • Jitka Kirchnerova

   OriginalPaper Pages: 932 - 939

5. Characteristics of phenylalanine imprinted membrane prepared by the wet phase inversion method

   • Joong Kon Park
   • Jeong Il Seo

   OriginalPaper Pages: 940 - 948

6. A kinetic model for polystyrene (PS) pyrolysis reaction

   • Hyun-Seob Song
   • Joo Sung Lee
   • Jae Chun Hyun

   OriginalPaper Pages: 949 - 953

7. Optimum operating conditions for the removal of volatile organic compounds in a compost-packed biofilter

   • In-Kil Yoon
   • Chang-Nyung Kim
   • Chang-Ho Park

   OriginalPaper Pages: 954 - 959

8. Kinetics of cellobiose decomposition under subcritical and supercritical water in continuous flow system

   • Jung Hoon Park
   • Sang Do Park

   OriginalPaper Pages: 960 - 966

9. Adsorption equilibrium characteristics of 2,4-Dichlorophenoxyacetic acid and 2,4-Dinitrophenol on granular activated carbons

   • Sook Jin Kim
   • Wang Geun Shim
   • Sung Yong Cho

   OriginalPaper Pages: 967 - 977

10. Determination of retention factors of aromatic compounds by gradient-elution reverse-phase high performance liquid chromatography

    • Ju Weon Lee
    • Kyung Ho Row

    OriginalPaper Pages: 978 - 985

11. Supercritical Carbon Dioxide debinding in metal injection molding (MIM) process

    • Yong-Ho Kim
    • Youn-Woo Lee
    • Jong Sung Lim

    OriginalPaper Pages: 986 - 991

12. Prediction of the solubility of 6APA in aqueous phase and optimum control scheme for batch crystallization process through pH variation

    • Bahman ZareNezhad

    OriginalPaper Pages: 992 - 995

13. Simulation of the aromatic recovery process by extractive distillation

    • Min Su Ko
    • Sangyoup Na
    • Hwayong Kim

    OriginalPaper Pages: 996 - 1000

14. Numerical analysis of fixed bed adsorption kinetics using orthogonal collocation

    • In-Soo Park

    OriginalPaper Pages: 1001 - 1006

15. High pressure phase behavior for carbon dioxide-1-butanol and carbon dioxide-1-octanol systems

    • Hun-Soo Byun
    • Chul Kwak

    OriginalPaper Pages: 1007 - 1013

16. Analysis of the constant molar flow method for measurements of kinetics parameters in porous adsorbent particles

    • In-Soo Park

    OriginalPaper Pages: 1014 - 1019

17. Statistical and deterministic chaos analysis of pressure fluctuations in a fluidized bed of polymer powders

    • See Hoon Lee
    • Sang Done Kim
    • Soung Hee Park

    OriginalPaper Pages: 1020 - 1025

18. Degradation of benzene and toluene by a fluidized bed bioreactor including microbial consortium

    • Kwang Joong Oh
    • Young Sik Kim
    • Donguk Kim

    OriginalPaper Pages: 1026 - 1029

19. Particle size distribution of PM-10 and heavy metal emission with different temperature and HCl concentrations from incinerators

    • Jong-Ik Yoo
    • Ki-Heon Kim
    • Min Jang

    OriginalPaper Pages: 1030 - 1036

20. Effectiveness and mechanisms of high-temperature lead capture by various Aluminum-Silicate minerals

    • Hee-Chul Yang
    • Jong-Sung Yun
    • Joon-Hyung Kim

    OriginalPaper Pages: 1037 - 1042

21. Temperature fluctuations and heat transfer in a circulating fluidized bed

    • Pyung-Seob Song
    • Yi-Yeong Jeong
    • Sang-Done Kim

    OriginalPaper Pages: 1043 - 1049

22. A study of adsorption behavior of 2,4-Dichlorophenoxyacetic Acid onto various GACs

    • Sook Jin Kim
    • Tae Young Kim
    • Sung Yong Cho

    OriginalPaper Pages: 1050 - 1058

23. Enhancement of combustion efficiency with mixing ratio during fluidized bed combustion of anthracite and bituminous blended coal

    • Jeong-Gook Jang
    • Mi-Ran Kim
    • Jea-Keun Lee

    OriginalPaper Pages: 1059 - 1065

24. Loopseal operation of iron ore particles in pneumatic conveying

    • Won Namkung
    • Minyoung Cho

    OriginalPaper Pages: 1066 - 1071

25. Photocatalytic degradation of trichloroethylene over TiO₂/SiO2 in an annulus fluidized bed reactor

    • Tak-Hyoung Lim
    • Sang-Done Kim

    OriginalPaper Pages: 1072 - 1077

26. Removal of heavy metal-cyanide complexes by ion exchange

    • Seung-Jai Kim
    • Ki-Hyun Lim
    • Sung-Yong Cho

    OriginalPaper Pages: 1078 - 1084

27. Particle size effect on the filtration drag of fly ash from a coal power plant

    • Joo-Hong Choi
    • Soon-Jong Ha
    • Young-Ok Park

    OriginalPaper Pages: 1085 - 1090

28. Steam gasification of an australian bituminous coal in a fluidized bed

    • Woon-Jae Lee
    • Sang-Done Kim
    • Byung-Ho Song

    OriginalPaper Pages: 1091 - 1096

29. Effect of Cl/S molar ratio on theoretical partitioning of heavy metals under waste combustion conditions

    • Jeong-Gook Jang
    • Mi-Ran Kim
    • Jea-Keun Lee

    OriginalPaper Pages: 1097 - 1105

30. Drying characteristics of millet in a continuous multistage fluidized bed

    • Kyong-Bin Choi
    • Sang-Il Park
    • Dong-Hyun Lee

    OriginalPaper Pages: 1106 - 1111

31. Pressure fluctuation characteristics of polyethylene particles in a gas-solid fluidized bed with different distributors

    • Dong Hyun Yang
    • Dong Hyun Lee
    • Gui Young Han

    OriginalPaper Pages: 1112 - 1116