1. Influence of the cutting edge rounding on the chip formation process: Part 1. Investigation of material flow, process forces, and cutting temperature

   • B. Denkena
   • J. Köhler
   • Mesfin Sisay Mengesha

   Production Process 12 February 2012 Pages: 329 - 338

   

2. Development of a warm cross wedge rolling process using FEA and downsized experimental trials

   • Hanns Kache
   • Malte Stonis
   • Bernd-Arno Behrens

   Production Process 24 April 2012 Pages: 339 - 348

   

3. A new experimental methodology to analyse the friction behaviour at the tool-chip interface in metal cutting

   • Hendrik Puls
   • Fritz Klocke
   • Dieter Lung

   Production Process 08 May 2012 Pages: 349 - 354

   

4. Process design space for optimal surface integrity in finish hard milling of tool steel

   • S. Zhang
   • W. Li
   • Y. B. Guo

   Production Process 09 May 2012 Pages: 355 - 365

   

5. Residual stresses in surface layer after dry and MQL turning of AISI 316L steel

   • Tadeusz Leppert
   • Ru Lin Peng

   Production Process Open access 23 May 2012 Pages: 367 - 374

   

6. Determination of surface and in-depth residual stress distributions induced by hard milling of H13 steel

   • S. Zhang
   • T. C. Ding
   • J. F. Li

   Production Process 26 May 2012 Pages: 375 - 383

   

7. The non-hydrostatic response of polymer melts as a pressure medium in sheet metal forming

   • A. E. Tekkaya
   • M. M. Hussain
   • J. Witulski

   Production Process 03 June 2012 Pages: 385 - 394

   

8. Simulation of personnel requirements during production ramp-up

   • Gisela Lanza
   • Anna Sauer

   Production Process 07 June 2012 Pages: 395 - 402

   

9. Flank milling of compliant workpieces with chamfered tools

   • B. Denkena
   • W. Bickel
   • V. Sellmeier

   Production Process 19 June 2012 Pages: 403 - 412

   

10. Shear cutting of press hardened steel: influence of punch chamfer on process forces, tool stresses and sheared edge qualities

    • Katrin Nothhaft
    • Joungsik Suh
    • Wolfram Volk

    Production Process 19 July 2012 Pages: 413 - 420

    

11. Fatigue analysis of a mechanical press by means of the hybrid multi-body simulation

    • B.-A. Behrens
    • R. Krimm
    • C. Wager

    Computer Aided Engineering 14 July 2012 Pages: 421 - 430

    

12. Research on tool wear detection based on machine vision in end milling process

    • Jilin Zhang
    • Chen Zhang
    • Laishui Zhou

    Computer Aided Engineering 22 June 2012 Pages: 431 - 437

    

13. Development of an innovative monitoring system for spray fields in hot forging processes

    • Bernd-Arno Behrens
    • Conrad Frischkorn
    • Ingo Lüken

    Quality Assurance 20 June 2012 Pages: 439 - 447

    

14. Model based logistic monitoring for supply and assembly processes

    • Ben Münzberg
    • Matthias Schmidt
    • Peter Nyhuis

    Production Management 13 July 2012 Pages: 449 - 458

    

15. Tool path adaption based on optical measurement data for milling with industrial robots

    • E. Abele
    • K. Schützer
    • M. Pischan

    Machine Tool 18 May 2012 Pages: 459 - 465

    

16. Analysis of servo-mechanic drive concepts for forming presses

    • Christer-C. Schenke
    • Hajo Wiemer
    • Knut Großmann

    Machine Tool 30 May 2012 Pages: 467 - 474

    

17. Reliable material damping ratio determination in machine tool structures

    • K. Niehues
    • S. Schwarz
    • M. F. Zaeh

    Machine Tool 03 June 2012 Pages: 475 - 484

    

18. Process stabilization with an adaptronic spindle system

    • Berend Denkena
    • Olaf Gümmer

    Machine Tool 19 June 2012 Pages: 485 - 492

    

19. Improvement of dry EDM process characteristics using artificial soft computing methodologies

    • Reza Teimouri
    • Hamid Baseri

    Machine Tool 22 June 2012 Pages: 493 - 504

    

20. Identification method for damping parameters of roller linear guides

    • Christian Brecher
    • Marcel Fey
    • Stephan Bäumler

    Machine Tool 14 July 2012 Pages: 505 - 512

    

21. An active tool holding device

    • Alexander Boldering
    • Annika Raatz

    Machine Tool 15 July 2012 Pages: 513 - 520

    

22. Eccentric universal joints for parallel kinematic machine tools: variants and kinematic transformations

    • Knut Großmann
    • Bernd Kauschinger

    Machine Tool 29 July 2012 Pages: 521 - 529

    

23. An agent-based concept for planning and control of the production of carbon fibre reinforced plastics aircraft structures with mobile production units

    • Franz Dietrich
    • Christian Löchte
    • Annika Raatz

    Assembly 07 June 2012 Pages: 531 - 539