1. Analysis of wear of fused silica moulding using glassy carbon moulds

   • Fritz Klocke
   • Olaf Dambon
   • Julia Dukwen

   Production Process 11 June 2016 Pages: 367 - 374

   

2. Reprocessing of aluminum chips by hot backward extrusion

   • Bernd-Arno Behrens
   • Anas Bouguecha
   • Martin Bonhage

   Production Process 18 June 2016 Pages: 375 - 382

   

3. Influence of short-term heat treatment on the microstructure and mechanical properties of EN AW-6060 T4 extrusion profiles: Part A

   • Hannes Fröck
   • Matthias Graser
   • Olaf Kessler

   Production Process 17 June 2016 Pages: 383 - 389

   

4. Influence of short-term heat treatment on the microstructure and mechanical properties of EN AW-6060 T4 extrusion profiles—Part B

   • Matthias Graser
   • Hannes Fröck
   • Marion Merklein

   Production Process 16 June 2016 Pages: 391 - 398

   

5. Tailored heat treated accumulative roll bonded aluminum blanks: failure under bending stresses

   • H. Nguyen
   • W. Böhm
   • M. Merklein

   Production Process 18 June 2016 Pages: 399 - 407

   

6. Concept of an offline correction method based on historical data for milling operations using industrial robots

   • Jörg Krüger
   • Hongqing Zhao
   • Wilfrid Polley

   Production Process 04 July 2016 Pages: 409 - 420

   

7. An integrated model of tool grinding: challenges, chances and limits of predicting process dynamics

   • K. M. de Payrebrune
   • M. Kröger

   Production Process 24 June 2016 Pages: 421 - 432

   

8. Repairing parts from nickel base material alloy by laser cladding and ball end milling

   • V. Böß
   • B. Denkena
   • B. Rottwinkel

   Production Process 17 August 2016 Pages: 433 - 441

   

9. Keyhole stability during laser welding—part I: modeling and evaluation

   • Jörg Volpp
   • Frank Vollertsen

   Production Process 02 September 2016 Pages: 443 - 457

   

10. Tribological measures for controlling material flow in sheet-bulk metal forming

    • M. Löffler
    • K. Andreas
    • M. Merklein

    Production Process 31 August 2016 Pages: 459 - 470

    

11. Priority allocation rules for single machine total weighted linear and square tardiness problems

    • Aihua Yin
    • Abraham P. Punnen
    • Dongping Hu

    Computer Aided Engineering 11 June 2016 Pages: 471 - 476

    

12. Bi-objective scheduling of flexible flow lines: a gradual transition tabu search approach

    • M. Zandieh
    • M. B. Abiri
    • Seyed Habib A. Rahmati

    Production Management 25 June 2016 Pages: 477 - 488

    

13. Simulation-based planning and evaluation of personnel scheduling in knowledge-intensive production systems

    • B. Denkena
    • M. A. Dittrich
    • C. Wagener

    Production Management 26 August 2016 Pages: 489 - 496

    

14. Friction in feed drives of machine tools: investigation, modeling and validation

    • C. Rebelein
    • M. F. Zaeh

    Machine Tool 23 May 2016 Pages: 497 - 507

    

15. Finite element modeling for the cutting process of the titanium alloy Ti10V2Fe3Al

    • Michael Storchak
    • Like Jiang
    • Xun Li

    Machine Tool 20 July 2016 Pages: 509 - 517

    

16. Simulation and development of an active damper with robust μ-control for a machine tool with a gantry portal

    • E. Abele
    • G. Pfeiffer
    • A. Bretz

    Machine Tool 22 August 2016 Pages: 519 - 528

    

17. Preload variation due to temperature increase in double nut ball screws

    • A. Oyanguren
    • P. Zahn
    • I. Ulacia

    Machine Tool 26 August 2016 Pages: 529 - 537