Influence of Cell Anisotropy and Relative Density on Compressive Deformation Responses of LM13-Cenosphere Hybrid Foam
Authors (first, second and last of 7)
Volume 28, issue 1, January 2019
57 articles in this issue
-
-
Laser Additive Manufacturing of (Ti-6Al-4V)/10 wt.% Ag Composite Using Spherical Powders to Reduce Wear and Friction
Authors (first, second and last of 6)
-
Cathodic Cage Plasma Pre-treatment of TiN-Coated AISI-304 Stainless Steel for Enhancement of Mechanical Strength and Wear Resistance
Authors (first, second and last of 6)
-
Effects of Heat Treatment on Microstructure, Mechanical Properties, Corrosion Resistance and Cytotoxicity of ZM21 Magnesium Alloy as Biomaterials
Authors (first, second and last of 7)
-
-
-
-
Evaluation of Plastic “Eta” Factor for Welds of SS316L(N) with High Strength Mismatch Ratio
Authors (first, second and last of 5)
-
-
Elastic Modulus Estimation for Copper Syntactic Foams Reinforced with Iron Hollow Spheres of Different Wall Thicknesses
Authors (first, second and last of 6)
-
Microstructure Evolution and Mechanical Property of Low-Alloy Steel Used for Armor Layer of Flexible Pipe During Thermomechanical Process and Hot Rolling Process
Authors (first, second and last of 8)
-
Development and Mechanical Properties of In Situ Al3Ti-Reinforced Nanostructured AA6061 via Mechanical Alloying
Authors (first, second and last of 4)
-
Workability Characteristics and Deformation Mechanisms of Die-Cast AM60 and AZ91 Magnesium Alloys: Correlation with Processing Maps
Authors (first, second and last of 4)
-
Microstructure and Mechanical Property Improvement in Laser-Welded TC4 Titanium Alloy and 301L Stainless Steel Joints Without Filler Metal
Authors (first, second and last of 4)
-
Experimental and Numerical Analyses of the Consolidation Process of AA 7075–2 wt.% ZrO2 Powders by Equal Channel Angular Pressing
Authors (first, second and last of 4)
-
Ultra-Shallow Doping B, Mg, Ni, Cu, Mn, Cr and Fe into SiC with Very High Surface Concentrations Based on Plasma Stimulated Room-Temperature Diffusion
Authors (first, second and last of 18)
-
Experimental Investigations for Optimizing the Extrusion Parameters on FDM PLA Printed Parts
Authors (first, second and last of 5)
-
Optimization of Tensile and Corrosion Properties of Dissimilar Friction Stir Welded AA2024-7075 Joints
Authors (first, second and last of 6)
-
Effect of Combined Rolling–ECAP on Ultrafine-Grained Structure and Properties in 6063 Al Alloy
Authors (first, second and last of 7)
-
-
Fabrication and Characterization of Core–Shell Density-Graded 316L Stainless Steel Porous Structure
Authors
-
Design and Development of Galvannealed Dual-Phase Steel: Microstructure, Mechanical Properties and Weldability
Authors (first, second and last of 7)
-
Mechanical Alloying and Powder Forging of 18%Cr Oxide Dispersion-Strengthened Steel Produced Using Elemental Powders
Authors (first, second and last of 5)
-
Role of Si in the Surface Damage Mechanism of RB-SiC/Si Under Mechanical Loading
Authors (first, second and last of 5)
-
EBSD Study on Processing Domain Parameters of Oxide Dispersion Strengthened 18Cr Ferritic Steel
Authors (first, second and last of 5)
-
Performance of Nd-Fe-B Magnets Fabricated by Hot Isostatic Pressing and Low-Temperature Sintering
Authors (first, second and last of 7)
-
Solidification Characteristics of Silicon-Alloyed Ductile Cast Irons
Authors (first, second and last of 4)
-
Microstructure and Corrosion Properties of Laser-Welded SAF 2507 Super Duplex Stainless Steel Joints
Authors (first, second and last of 6)
-
Development of a Novel Cr21 Lean Duplex Stainless Steel and Its Hot Deformation Behavior
Authors (first, second and last of 5)
-
A Systematic Study on the Dynamic Softening Behavior of a Heat-Resistant Alloy Considering Thermal and Microstructural Effects
Authors (first, second and last of 8)
-
Variation in Morphology and Kinetics of Granular Bainite with Welding Thermal Cycles in High-Nb Fire-Resistant Steel: Experiments and Theoretical Calculations
Authors (first, second and last of 6)
-
-
Influence of Bias Voltage and CH4/N2 Gas Ratio on the Structure and Mechanical Properties of TiCN Coatings Deposited by Cathodic Arc Deposition Method
Authors (first, second and last of 6)
-
Quantitative Evaluation of the Interaction Between Wear and Corrosion on Mg-3Gd-1Zn Alloy in Simulated Body Fluid
Authors (first, second and last of 4)
-
Tribo-corrosion and Albumin Attachment of Nitrogen Ion-Implanted CoCrMo Alloy During Friction Onset
Authors (first, second and last of 5)
-
Investigation of the Edge Crack Sensitivity of Cold Rolled Hot-Dip Galvanized DP780 Steels
Authors (first, second and last of 6)
-
-
Influence of Ca and Sr Addition on Impression Creep Behavior of Mg-4Al-RE Alloy
Authors (first, second and last of 7)
-
Constitutive Model Over Wide Temperature Range and Considering Negative-to-Positive Strain Rate Sensitivity for As-Quenched AA2219 Sheet
Authors (first, second and last of 5)
-
Tribocorrosion Behavior of SAF 2205 Duplex Stainless Steel in Artificial Seawater
Authors (first, second and last of 5)
-
Effect of Sintering Atmosphere on the Synthesis Process, Electrical and Mechanical Properties of NiFe2O4/Nano-TiN Ceramics
Authors (first, second and last of 6)
-
The Effect of Jet Flow Impingement on the Corrosion Products Formed on a Pipeline Steel in Naturally Aerated Sour Brine
Authors (first, second and last of 4)
-
Understanding the Mechanism of Dynamic Recrystallization During High-Temperature Deformation in Nb-1Zr-0.1C Alloy
Authors (first, second and last of 6)
-
High-Temperature Oxidation of Stellite 12 Hardfacings: Effect of Mo on Characteristics of Oxide Scale
Authors (first, second and last of 4)
-
Effects of Vanadium on Modification of Iron-Rich Intermetallics and Mechanical Properties in A356 Cast Alloys with 1.5 wt.% Fe
Authors (first, second and last of 6)
-
The Effect of Chemical Composition and Processing Technology on the Microstructure, Texture and Earing Behavior of DR Tinplate
Authors (first, second and last of 5)
-
Microstructure and Mechanical Characterization of Friction-Stir-Welded 316L Austenitic Stainless Steels
Authors (first, second and last of 4)
-
ZrB2-SiC-Ta4HfC5/Ta4HfC5 Oxidation-Resistant Dual-Layer Coating Fabricated by Spark Plasma Sintering for C/C Composites
Authors (first, second and last of 4)
-
Feasibility of Using Steel Drums for the Confinement of Burned Low-Level Radioactive Waste Ashes
Authors (first, second and last of 4)
-
