1. Processing and Thermoelectric Properties of TiNiSn Materials: A Review

   • J. S. Young
   • R. G. Reddy

   ReviewPaper 15 October 2019 Pages: 5917 - 5930

   

2. Impact of Cryogenic Treatment on Mechanical Behavior and Microstructure of Ti-6Al-4V ELI Biomaterial

   • Anil Kumar Singla
   • Jagtar Singh
   • Vishal S. Sharma

   OriginalPaper 20 September 2019 Pages: 5931 - 5945

   

3. Effect of Prestrain on the Fatigue Life of Superelastic Nitinol

   • Karthikeyan Senthilnathan
   • Ali Shamimi
   • Tom Duerig

   OriginalPaper Open access 23 September 2019 Pages: 5946 - 5958

   

4. Performance of Composite Insulators Used for Electric Transmission under Extreme Climatic Conditions

   • Sounak Nandi
   • B. Subba Reddy
   • Dinesh Sharma

   OriginalPaper 27 September 2019 Pages: 5959 - 5969

   

5. Aqueous Corrosion Behavior of Cast CoCrFeMnNi Alloy

   • S. Pathak
   • N. Kumar
   • P. S. De

   OriginalPaper 30 September 2019 Pages: 5970 - 5977

   

6. Fatigue Failure Characteristics of Single-Crystal Fe-3%Al Alloy

   • Mitsuhiro Okayasu
   • Keisuke Noda

   OriginalPaper 20 September 2019 Pages: 5978 - 5987

   

7. Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed β-Type Titanium Alloys for Orthopedic Applications

   • Mamoun Fellah
   • Naouel Hezil
   • Sabine Weiss

   OriginalPaper 24 September 2019 Pages: 5988 - 5999

   

8. Wear Behavior of Ti-Al₂O₃ Biocomposites in 9 g/L NaCl Solution

   • André F. F. Oliveira
   • Fatih Toptan

   OriginalPaper 24 September 2019 Pages: 6000 - 6010

   

9. Alternative Pathogen Control Chemistry of Glass Fiber-Reinforced Polyester Panels for Cooling Towers

   • Seval Bal
   • Nazmiye Ozlem Sanli
   • Yusuf Menceloglu

   OriginalPaper 30 September 2019 Pages: 6011 - 6024

   

10. Investigation of Mode I Notch Toughness of Zr_41.2Ti_13.8Cu₁₀Ni_12.5Be_22.5 Metallic Glass under Dynamic Loading Conditions

    • Zhiyong Wang
    • Zhipeng Zhou
    • Zhihua Wang

    OriginalPaper 08 October 2019 Pages: 6025 - 6032

    

11. Investigation into the Wear and Dent Resistance of Ni/Ti Nanolaminates and Superelastic NiTi Coating

    • Nicole Cameron
    • Zoheir Farhat

    OriginalPaper 09 October 2019 Pages: 6033 - 6041

    

12. On the Use of Voltammetry to Estimate the Effectiveness of Cathodic Protection of Buried Steel Structures

    • Dan Nguyen Dang
    • Marc Jeannin
    • Philippe Refait

    OriginalPaper 10 October 2019 Pages: 6042 - 6052

    

13. Influence of Y-Rich Compounds on High-Cycle Fatigue Performance of Y-Doped M951 Superalloy

    • Pengjie Zhou
    • Dehang Song
    • Katsunari Oikawa

    OriginalPaper 11 October 2019 Pages: 6053 - 6062

    

14. Study on Tribological and Friction Noise Performance of Ti6Al4V Self-lubricating Composites

    • Zhenyu Yang
    • Xiaoliang Shi
    • Chunliang Fu

    OriginalPaper 15 October 2019 Pages: 6063 - 6072

    

15. The Effect of Annealing Time on Microstructure and AC Corrosion Behavior of X80 Steel in Simulated Solution of Alkaline Soil

    • M. Zhu
    • J. Ma
    • C. W. Du

    OriginalPaper 15 October 2019 Pages: 6073 - 6080

    

16. Electrochemical Corrosion Behavior of 5083 Aluminum Alloy Subjected to Laser Shock Peening

    • Yu Yang
    • Wangfan Zhou
    • Xudong Ren

    OriginalPaper 23 September 2019 Pages: 6081 - 6091

    

17. Characterization of Laser-Welded Ti Alloy and Stainless Steel Joint Using Cu Interlayer

    • Yan Zhang
    • DaQian Sun
    • HongMei Li

    OriginalPaper 20 September 2019 Pages: 6092 - 6101

    

18. Corrosion Behavior of AZ31 Magnesium Alloy Produced by Continuous Variable Cross Section Direct Extrusion

    • Wen Kang
    • Feng Li
    • Wen Bin Fang

    OriginalPaper 24 September 2019 Pages: 6102 - 6110

    

19. The Effect of Weld Metal Composition on Microstructural and Mechanical Properties of Dissimilar Welds Between Monel 400 and Inconel 600

    • Naser Aminipour
    • Reza Derakhshandeh-Haghighi

    OriginalPaper 20 September 2019 Pages: 6111 - 6124

    

20. Investigation of the Hot Stamping Process for TRIP Steel with High Strength and High Ductility

    • Xianhong Han
    • Huizhen Zhang
    • Jun Chen

    OriginalPaper 20 September 2019 Pages: 6125 - 6134

    

21. Functionally Graded W-Cu Materials Prepared from Cu-Coated W Powders by Microwave Sintering

    • Wenchao Chen
    • Pengqi Chen
    • Jigui Cheng

    OriginalPaper 23 September 2019 Pages: 6135 - 6144

    

22. Microstructure and Mechanical Properties of B₄C-Blended M3:2 High-Speed Steel Powders Consolidated by Sintering and Heat Treatment

    • Fengli Zhang
    • Peng Luo
    • Songlin Li

    OriginalPaper 23 September 2019 Pages: 6145 - 6156

    

23. Workability of High-Strength Automobile Steel at High Temperatures Using Hot Processing Maps and Electron Backscatter Diffraction

    • Zhi-Qiang Yang
    • Li-Gang Liu
    • Qiang Li

    OriginalPaper 23 September 2019 Pages: 6157 - 6164

    

24. Beam Current Effect on Microstructure and Properties of Electron-Beam-Melted Ti-6Al-4V Alloy

    • N. S. Pushilina
    • V. A. Klimenov
    • R. S. Laptev

    OriginalPaper 20 September 2019 Pages: 6165 - 6173

    

25. Refill Friction Stir Spot Welding Dissimilar Al/Mg Alloys

    • Peng Chai
    • Wei Hu
    • Qi Song

    OriginalPaper 30 September 2019 Pages: 6174 - 6181

    

26. Effect of Rolling Temperature on the Microstructure and Mechanical Properties of AZ31 Alloy Sheet Processed through Variable-Plane Rolling

    • Yanjun Wu
    • Rong Zhu

    OriginalPaper 09 October 2019 Pages: 6182 - 6191

    

27. The Effect of Annealing on the Properties of AW5754 Aluminum Alloy-AZ31B Magnesium Alloy Explosively Welded Bimetals

    • Miroslav Sahul
    • Martin Sahul
    • Barbara Odokienová

    OriginalPaper 03 October 2019 Pages: 6192 - 6208

    

28. Characterization of Hot Workability of 5052 Aluminum Alloy Based on Activation Energy-Processing Map

    • Peng Zhou
    • Lei Deng
    • Xin-yun Wang

    OriginalPaper 09 October 2019 Pages: 6209 - 6218

    

29. Ti Alloy Three-Way Pipe Fabricated by the Combination of 3D Printing and Cold Isostatic Pressing

    • Yanru Shao
    • Fang Yang
    • Alex A. Volinsky

    OriginalPaper 09 October 2019 Pages: 6219 - 6227

    

30. Effect of Boron Micro-alloying on Microstructure and Corrosion Behavior of Dual-Phase Steel

    • Satendra Kumar
    • Rahul Desai

    OriginalPaper 08 October 2019 Pages: 6228 - 6236

    

31. Effect of Solution Heating Rate on Quasi-static and Dynamic Mechanical Properties of Al-Mg-Si-Cu Alloy

    • Xiaofeng Wang
    • Tongya Shi
    • Yonggang Wang

    OriginalPaper 09 October 2019 Pages: 6237 - 6247

    

32. Development of Pore-Free Ti-Si-C MAX/Al-Si Composite Materials Manufactured by Squeeze Casting Infiltration

    • Anna Dmitruk
    • Krzysztof Naplocha
    • Karl Ulrich Kainer

    OriginalPaper Open access 16 October 2019 Pages: 6248 - 6257

    

33. Magnetron-Sputtered Ni-Cr and Ti-Si Layers to Protect Ti-46Al-8Nb (at.%) Substrates Against Gas Absorption

    • Marzena Mitoraj-Królikowska
    • Elzbieta Godlewska

    OriginalPaper Open access 26 September 2019 Pages: 6258 - 6267

    

34. Mechanical Behavior of Lead at High Strain Rates

    • Xiaoyun Zhang
    • Yihui Zhu
    • Cheng Xu

    OriginalPaper 23 September 2019 Pages: 6268 - 6274

    

35. Comparative Corrosion Behavior of Five Different Microstructures of Rebar Steels in Simulated Concrete Pore Solution with and Without Chloride Addition

    • Prvan Kumar Katiyar
    • Prasanna Kumar Behera
    • K. Mondal

    OriginalPaper 11 October 2019 Pages: 6275 - 6286

    

36. Hot Deformation and Processing Maps of B₄C/6061Al Nanocomposites Fabricated by Spark Plasma Sintering

    • Ruifeng Liu
    • Wenxian Wang
    • Shipeng Wan

    ReviewPaper 23 September 2019 Pages: 6287 - 6297

    

37. Exploiting Acoustic Anisotropy to Detect Recrystallization in a Ni Single Crystal Using Ultrasonic Nondestructive Inspection

    • Mark F. A. Warchol
    • Trevor J. Watt
    • Eric M. Taleff

    OriginalPaper 23 September 2019 Pages: 6298 - 6306

    

38. Comparative Evaluation of Creep-Rupture Behavior of P9 Steel Plate and Thick Section Tubeplate Forging

    • B. K. Choudhary
    • Isaac Samuel E.
    • S. D. Yadav

    OriginalPaper 26 September 2019 Pages: 6307 - 6319

    

39. Effect of Tungsten Inert Gas Arc Remelting on Microstructure and Wear Properties of Plasma-Sprayed NiCr-Cr₃C₂ Coating

    • Jing-min Yuan
    • Tian-shun Dong
    • Ran Wang

    OriginalPaper 25 September 2019 Pages: 6320 - 6329

    

40. Characterization of Hydrophobic Silane Film Deposited on AISI 304 Stainless Steel for Corrosion Protection

    • E. T. Akinlabi
    • A. D. Baruwa
    • J. Chinn

    OriginalPaper 26 September 2019 Pages: 6330 - 6339

    

41. Effect of Molybdenum Content on Structure and Properties of a Co-Cr Biomedical Alloy

    • Amit Aherwar
    • Amar Patnaik
    • Marjan Bahraminasab

    OriginalPaper 26 September 2019 Pages: 6340 - 6353

    

42. Synergetic Strengthening of Grain Refinement and Texture in Gradient Zircaloy-4 by Surface Mechanical Rolling Treatment

    • Chao Xin
    • Qiaoyan Sun
    • Jun Sun

    OriginalPaper 25 September 2019 Pages: 6354 - 6364

    

43. Effect of Tool Offset and Rotational Speed in Dissimilar Friction Stir Welding of AISI 304 Stainless Steel and Mild Steel

    • Avinish Tiwari
    • Piyush Singh
    • Sukhomay Pal

    OriginalPaper 07 October 2019 Pages: 6365 - 6379

    

44. Impact Behavior of Polyetheretherketone/Nickel Foam Co-continuous Composites

    • X. G. Yang
    • D. L. Duan
    • H. C. Zhang

    OriginalPaper 30 September 2019 Pages: 6380 - 6390

    

45. Microstructural Development and Mechanical Properties of Friction Stir Welded Ferritic Stainless Steel AISI 409

    • M. M. Z. Ahmed
    • Mohamed M. El-Sayed Seleman
    • Essam Ahmed

    OriginalPaper 10 October 2019 Pages: 6391 - 6406

    

46. Very High-Cycle Fatigue Properties and Residual Stress Relaxation of Micro-shot-Peened EA4T Axle Steel

    • Jinxin Zhang
    • Jiwang Zhang
    • Xing Li

    OriginalPaper 09 October 2019 Pages: 6407 - 6417

    

47. Fatigue Failure Analysis and Life Prediction of Aeroengine Compressor Components

    • Yajun Chen
    • Xuntao Zhang
    • Haipeng Song

    OriginalPaper 15 October 2019 Pages: 6418 - 6427

    

48. Effect of Chromium Content on Microstructure, Hardness, and Wear Resistance of As-Cast Fe-Cr-B Alloy

    • Ye Tian
    • Jiang Ju
    • Yongping Lei

    OriginalPaper 07 October 2019 Pages: 6428 - 6437

    

49. On the Microstructure and Solidification Behavior of N-Bearing Ti-46Al-8Ta (at.%) Intermetallic Alloys

    • Soroush Saeedipour
    • Ahmad Kermanpur

    OriginalPaper 07 October 2019 Pages: 6438 - 6448

    

50. Deformation Behavior and Microstructural Evolution of Reeled Pipeline Steels during Cyclic Plastic Deformation

    • Yuanbo Jiang
    • Chengning Li
    • Jiangcheng Liu

    OriginalPaper 10 October 2019 Pages: 6449 - 6457