1. Influence of Cell Anisotropy and Relative Density on Compressive Deformation Responses of LM13-Cenosphere Hybrid Foam

   • Shyam Birla
   • D. P. Mondal
   • Rajeev Kumar

   OriginalPaper 13 November 2018 Pages: 1 - 11

   

2. Laser Additive Manufacturing of (Ti-6Al-4V)/10 wt.% Ag Composite Using Spherical Powders to Reduce Wear and Friction

   • Xiaoxue Li
   • Kang Yang
   • Qiang He

   OriginalPaper 14 November 2018 Pages: 12 - 19

   

3. Cathodic Cage Plasma Pre-treatment of TiN-Coated AISI-304 Stainless Steel for Enhancement of Mechanical Strength and Wear Resistance

   • H. A. Raza
   • M. Shafiq
   • C. M. Lopez-Badillo

   OriginalPaper 03 December 2018 Pages: 20 - 32

   

4. Effects of Heat Treatment on Microstructure, Mechanical Properties, Corrosion Resistance and Cytotoxicity of ZM21 Magnesium Alloy as Biomaterials

   • Dayue Jiang
   • Yilong Dai
   • Kun Yu

   OriginalPaper 10 December 2018 Pages: 33 - 43

   

5. Oxidation Behavior of Austenitic Steels in Supercritical Water Containing Dissolved Oxygen

   • Zhongliang Zhu
   • Hongyuan Li
   • Qiong Cao

   OriginalPaper 14 December 2018 Pages: 44 - 52

   

6. Micromechanical Modeling and Investigating the Effect of Particle Size and the Interface of Phases on the Mechanical Behavior of Dual-Phase Steels

   • Alireza Fallahi Arezodar
   • Ali Nikbakht

   OriginalPaper 04 December 2018 Pages: 53 - 62

   

7. Large-Scale Molecular Dynamics Simulation Studies on Deformation of Ni Nanowires: Surface Profile, Defects and Stacking Fault Width Analysis

   • Krishna Chaitanya Katakam
   • Pradeep Gupta
   • Natraj Yedla

   OriginalPaper 12 December 2018 Pages: 63 - 78

   

8. Evaluation of Plastic “Eta” Factor for Welds of SS316L(N) with High Strength Mismatch Ratio

   • R. Nikhil
   • S. A. Krishnan
   • A. Moitra

   OriginalPaper 18 December 2018 Pages: 79 - 86

   

9. Constitutive Modeling for Hot Deformation Behavior of Al-5083 + SiC Composite

   • Amitava Rudra
   • Satyabrata Das
   • Rupa Dasgupta

   OriginalPaper 18 December 2018 Pages: 87 - 99

   

10. Elastic Modulus Estimation for Copper Syntactic Foams Reinforced with Iron Hollow Spheres of Different Wall Thicknesses

    • L. Pérez
    • M. Villalobos
    • I. Alfonso

    OriginalPaper 19 December 2018 Pages: 100 - 106

    

11. Microstructure Evolution and Mechanical Property of Low-Alloy Steel Used for Armor Layer of Flexible Pipe During Thermomechanical Process and Hot Rolling Process

    • Zhenguang Liu
    • Shoudong Chen
    • Xiaowei Zhou

    OriginalPaper 15 November 2018 Pages: 107 - 116

    

12. Development and Mechanical Properties of In Situ Al₃Ti-Reinforced Nanostructured AA6061 via Mechanical Alloying

    • Versha Goyal
    • Rahul Ravi
    • P. R. Soni

    OriginalPaper 07 November 2018 Pages: 117 - 122

    

13. Workability Characteristics and Deformation Mechanisms of Die-Cast AM60 and AZ91 Magnesium Alloys: Correlation with Processing Maps

    • Dharmendra Chalasani
    • Mukesh Kumar Jain
    • Fateh Fazeli

    OriginalPaper 14 November 2018 Pages: 123 - 139

    

14. Microstructure and Mechanical Property Improvement in Laser-Welded TC4 Titanium Alloy and 301L Stainless Steel Joints Without Filler Metal

    • Yan Zhang
    • Da-Qian Sun
    • Hong-Mei Li

    OriginalPaper 12 November 2018 Pages: 140 - 153

    

15. Experimental and Numerical Analyses of the Consolidation Process of AA 7075–2 wt.% ZrO₂ Powders by Equal Channel Angular Pressing

    • S. E. Hernández-Martínez
    • J. J. Cruz-Rivera
    • J. L. Hernández-Rivera

    OriginalPaper 05 December 2018 Pages: 154 - 161

    

16. Ultra-Shallow Doping B, Mg, Ni, Cu, Mn, Cr and Fe into SiC with Very High Surface Concentrations Based on Plasma Stimulated Room-Temperature Diffusion

    • Ruixiang Hou
    • Lei Li
    • G. G. Qin

    OriginalPaper 06 December 2018 Pages: 162 - 168

    

17. Experimental Investigations for Optimizing the Extrusion Parameters on FDM PLA Printed Parts

    • Leipeng Yang
    • Shujuan Li
    • Qilong Yuan

    OriginalPaper 17 December 2018 Pages: 169 - 182

    

18. Optimization of Tensile and Corrosion Properties of Dissimilar Friction Stir Welded AA2024-7075 Joints

    • Chenghang Zhang
    • Guangjie Huang
    • Qing Liu

    OriginalPaper 17 December 2018 Pages: 183 - 199

    

19. Effect of Combined Rolling–ECAP on Ultrafine-Grained Structure and Properties in 6063 Al Alloy

    • Abdrakhman Naizabekov
    • Sergey Lezhnev
    • Igor Mazur

    OriginalPaper 10 December 2018 Pages: 200 - 210

    

20. Surface Self-nanocrystallization in Copper Electroforming

    • Chunjian Shen
    • Zengwei Zhu
    • Di Zhu

    OriginalPaper 19 December 2018 Pages: 211 - 220

    

21. Fabrication and Characterization of Core–Shell Density-Graded 316L Stainless Steel Porous Structure

    • Morteza Mirzaei
    • Mohammad Hossein Paydar

    OriginalPaper 14 December 2018 Pages: 221 - 230

    

22. Design and Development of Galvannealed Dual-Phase Steel: Microstructure, Mechanical Properties and Weldability

    • Sourabh Chatterjee
    • Soumyajit Koley
    • Saurabh Kundu

    OriginalPaper 14 December 2018 Pages: 231 - 241

    

23. Mechanical Alloying and Powder Forging of 18%Cr Oxide Dispersion-Strengthened Steel Produced Using Elemental Powders

    • D. Kumar
    • U. Prakash
    • T. Sakthivel

    OriginalPaper 17 December 2018 Pages: 242 - 253

    

24. Role of Si in the Surface Damage Mechanism of RB-SiC/Si Under Mechanical Loading

    • Quanli Zhang
    • Zhen Zhang
    • Suet To

    OriginalPaper 17 December 2018 Pages: 254 - 262

    

25. EBSD Study on Processing Domain Parameters of Oxide Dispersion Strengthened 18Cr Ferritic Steel

    • Manmath Kumar Dash
    • S. Saroja
    • Arup Dasgupta

    OriginalPaper 17 December 2018 Pages: 263 - 272

    

26. Performance of Nd-Fe-B Magnets Fabricated by Hot Isostatic Pressing and Low-Temperature Sintering

    • Fang Yang
    • Haiying Wang
    • Yanli Sui

    OriginalPaper 17 December 2018 Pages: 273 - 277

    

27. Solidification Characteristics of Silicon-Alloyed Ductile Cast Irons

    • Stelian Stan
    • Iulian Riposan
    • Iuliana Stan

    OriginalPaper 18 December 2018 Pages: 278 - 286

    

28. Microstructure and Corrosion Properties of Laser-Welded SAF 2507 Super Duplex Stainless Steel Joints

    • Kai Qi
    • Ruifeng Li
    • Mingfang Wu

    OriginalPaper 18 December 2018 Pages: 287 - 295

    

29. Development of a Novel Cr21 Lean Duplex Stainless Steel and Its Hot Deformation Behavior

    • Yan Zhao
    • Yuan Wang
    • Zhenyu Liu

    OriginalPaper 18 December 2018 Pages: 296 - 307

    

30. A Systematic Study on the Dynamic Softening Behavior of a Heat-Resistant Alloy Considering Thermal and Microstructural Effects

    • Weicheng Jiang
    • Li Ruihong
    • AiLian Bao

    OriginalPaper 13 November 2018 Pages: 308 - 320

    

31. Variation in Morphology and Kinetics of Granular Bainite with Welding Thermal Cycles in High-Nb Fire-Resistant Steel: Experiments and Theoretical Calculations

    • Z. P. Qin
    • H. H. Wang
    • W. Deng

    OriginalPaper 12 November 2018 Pages: 321 - 329

    

32. Study on the Deformation Homogeneity and Electrical Conductivity in Co-Cr-Ni-Mo Wires Drawn with Different Drawing Practices

    • Sai Srikanth Gvk
    • M. J. Tan
    • Zhenyun Liu

    OriginalPaper 12 November 2018 Pages: 330 - 342

    

33. Influence of Bias Voltage and CH₄/N₂ Gas Ratio on the Structure and Mechanical Properties of TiCN Coatings Deposited by Cathodic Arc Deposition Method

    • Nikolay Petkov
    • Egor Kashkarov
    • Hristo Bahchedzhiev

    ReviewPaper 13 November 2018 Pages: 343 - 354

    

34. Quantitative Evaluation of the Interaction Between Wear and Corrosion on Mg-3Gd-1Zn Alloy in Simulated Body Fluid

    • Xiaobo Zhang
    • Jianwei Dai
    • Yunqiang Bai

    OriginalPaper 26 November 2018 Pages: 355 - 362

    

35. Tribo-corrosion and Albumin Attachment of Nitrogen Ion-Implanted CoCrMo Alloy During Friction Onset

    • Xueyan Yan
    • Jie Meng
    • Alex A. Volinsky

    OriginalPaper 26 November 2018 Pages: 363 - 371

    

36. Investigation of the Edge Crack Sensitivity of Cold Rolled Hot-Dip Galvanized DP780 Steels

    • Yun Han
    • Xingrong Chu
    • Huaxiang Teng

    OriginalPaper 04 December 2018 Pages: 372 - 381

    

37. Microstructure, Phase Transformation, Mechanical Behavior, Bio-corrosion and Antibacterial Properties of Ti-Nb-xSn (x = 0, 0.25, 0.5 and 1.5) SMAs

    • Mustafa K. Ibrahim
    • E. Hamzah
    • Safaa N. Saud

    OriginalPaper 30 November 2018 Pages: 382 - 393

    

38. Influence of Ca and Sr Addition on Impression Creep Behavior of Mg-4Al-RE Alloy

    • Yaocheng Zhang
    • Li Yang
    • Zhaoxia Han

    OriginalPaper 06 December 2018 Pages: 394 - 403

    

39. Constitutive Model Over Wide Temperature Range and Considering Negative-to-Positive Strain Rate Sensitivity for As-Quenched AA2219 Sheet

    • Z. X. Li
    • M. Zhan
    • J. W. Wang

    OriginalPaper 11 December 2018 Pages: 404 - 413

    

40. Tribocorrosion Behavior of SAF 2205 Duplex Stainless Steel in Artificial Seawater

    • Ruipeng Gao
    • Eryong Liu
    • Zhixiang Zeng

    OriginalPaper 11 December 2018 Pages: 414 - 422

    

41. Effect of Sintering Atmosphere on the Synthesis Process, Electrical and Mechanical Properties of NiFe₂O₄/Nano-TiN Ceramics

    • Bin Wang
    • Jinjing Du
    • Linbo Li

    OriginalPaper 10 December 2018 Pages: 423 - 430

    

42. The Effect of Jet Flow Impingement on the Corrosion Products Formed on a Pipeline Steel in Naturally Aerated Sour Brine

    • M. A. Domínguez-Aguilar
    • M. Díaz-Cruz
    • B. Castro-Domínguez

    OriginalPaper 10 December 2018 Pages: 431 - 447

    

43. Understanding the Mechanism of Dynamic Recrystallization During High-Temperature Deformation in Nb-1Zr-0.1C Alloy

    • Atanu Chaudhuri
    • Apu Sarkar
    • Satyam Suwas

    OriginalPaper 13 December 2018 Pages: 448 - 462

    

44. High-Temperature Oxidation of Stellite 12 Hardfacings: Effect of Mo on Characteristics of Oxide Scale

    • Amir Motallebzadeh
    • Shaikh Asad Ali Dilawary
    • Huseyin Cimenoglu

    OriginalPaper 10 December 2018 Pages: 463 - 474

    

45. Effects of Vanadium on Modification of Iron-Rich Intermetallics and Mechanical Properties in A356 Cast Alloys with 1.5 wt.% Fe

    • Bo Lin
    • Haoyu Li
    • Shaobo Li

    OriginalPaper 11 December 2018 Pages: 475 - 484

    

46. The Effect of Chemical Composition and Processing Technology on the Microstructure, Texture and Earing Behavior of DR Tinplate

    • Xiao-fei Zheng
    • Lu-hai Liao
    • Quan-quan Qiu

    OriginalPaper 14 December 2018 Pages: 485 - 497

    

47. Microstructure and Mechanical Characterization of Friction-Stir-Welded 316L Austenitic Stainless Steels

    • R. Ramesh
    • I. Dinaharan
    • E. T. Akinlabi

    OriginalPaper 17 December 2018 Pages: 498 - 511

    

48. ZrB₂-SiC-Ta₄HfC₅/Ta₄HfC₅ Oxidation-Resistant Dual-Layer Coating Fabricated by Spark Plasma Sintering for C/C Composites

    • Changling Zhou
    • Yushi Qi
    • Wenbo Han

    OriginalPaper 14 December 2018 Pages: 512 - 518

    

49. Feasibility of Using Steel Drums for the Confinement of Burned Low-Level Radioactive Waste Ashes

    • Gustavo S. Duffó
    • Silvia B. Farina
    • Francesca Marotta

    OriginalPaper 17 December 2018 Pages: 519 - 525

    

50. Graphene-Reinforced Aluminum Hybrid Foam: Response to High Strain Rate Deformation

    • Sourav Das
    • Sanjeev Khanna
    • D. P. Mondal

    OriginalPaper 17 December 2018 Pages: 526 - 534