1. Thermal Simulation Analysis of Microstructure and Hardness for CrMoV with PWHT in Type IV Region

   • Bin Xu
   • Song Xue
   • Liangchao Li

   Topical Collection: Physical and Numerical Simulations of Materials Processing 13 September 2017 Pages: 2813 - 2819

   

2. Modification of Inclusions in Molten Steel by Mg-Ca Transfer from Top Slag: Experimental Confirmation of the ‘Refractory-Slag-Metal-Inclusion (ReSMI)’ Multiphase Reaction Model

   • Jae Hong Shin
   • Joo Hyun Park

   Communication 28 August 2017 Pages: 2820 - 2825

   

3. Formation Mechanism of Surface Crack in Low Pressure Casting of A360 Alloy

   • Shan-Guang Liu
   • Fu-Yang Cao
   • Jian-Fei Sun

   OriginalPaper 30 October 2017 Pages: 2826 - 2835

   

4. Solidification and Re-melting Phenomena During Slurry Preparation Using the RheoMetal™ Process

   • M. Payandeh
   • Mohsen Haddad Sabzevar
   • M. Wessén

   OriginalPaper Open access 21 August 2017 Pages: 2836 - 2848

   

5. Investigation of RE-O-S-As Inclusions in High Carbon Steels

   • Hongpo Wang
   • Lu Xiong
   • Yuanhua Zhou

   OriginalPaper 13 September 2017 Pages: 2849 - 2858

   

6. Flotation of Metallurgical Grade Silicon and Silicon Metal from Slag by Selective Hydrogen Fluoride-Assisted Flotation

   • E. Larsen
   • R. A. Kleiv

   OriginalPaper 24 August 2017 Pages: 2859 - 2865

   

7. Enhanced Dissolution of Platinum Group Metals Using Electroless Iron Deposition Pretreatment

   • Yu-ki Taninouchi
   • Toru H. Okabe

   OriginalPaper 18 September 2017 Pages: 2866 - 2872

   

8. Control of Carbide Precipitation During Electroslag Remelting-Continuous Rapid Solidification of GCr15 Steel

   • Gang Du
   • Jing Li
   • Zhong-Bing Wang

   OriginalPaper 21 September 2017 Pages: 2873 - 2890

   

9. Characterization of Flame Cut Heavy Steel: Modeling of Temperature History and Residual Stress Formation

   • T. Jokiaho
   • A. Laitinen
   • M. Vippola

   OriginalPaper 18 September 2017 Pages: 2891 - 2901

   

10. A New Grain Refiner for Ferritic Steels

    • Ming Li
    • Jian-Min Li
    • Ming-Xing Zhang

    OriginalPaper 04 October 2017 Pages: 2902 - 2912

    

11. Influence of the Physical Properties of Liquids and Diameter of Bubble on the Formation of Liquid Column at the Interface of Two Liquid Phases by the Rising Bubble

    • Masanori Tanno
    • Jiang Liu
    • Shin-ya Kitamura

    OriginalPaper 04 October 2017 Pages: 2913 - 2921

    

12. Experimentally Determined Phase Diagram for the Barium Sulfide-Copper(I) Sulfide System Above 873 K (600 °C)

    • Caspar Stinn
    • Katsuhiro Nose
    • Antoine Allanore

    OriginalPaper 04 October 2017 Pages: 2922 - 2929

    

13. Advanced Process Possibilities in Friction Crush Welding of Aluminum, Steel, and Copper by Using an Additional Wire

    • Florian A. Besler
    • Richard J. Grant
    • Michael J. R. Stegmüller

    OriginalPaper 11 October 2017 Pages: 2930 - 2948

    

14. Non-isothermal Crystallization Kinetics of Mold Fluxes for Casting High-Aluminum Steels

    • Lejun Zhou
    • Huan Li
    • Senlin Xie

    OriginalPaper 27 October 2017 Pages: 2949 - 2960

    

15. Study on Formation Mechanism of CaO-SiO₂-Based Inclusions in Saw Wire Steel

    • Kun-Peng Wang
    • Min Jiang
    • Zhan-Min Cao

    OriginalPaper 21 August 2017 Pages: 2961 - 2969

    

16. Experimental Phase Equilibria Studies of the Pb-Fe-O System in Air, in Equilibrium with Metallic Lead and at Intermediate Oxygen Potentials

    • M. Shevchenko
    • E. Jak

    OriginalPaper 16 August 2017 Pages: 2970 - 2983

    

17. Dephosphorization Kinetics between Bloated Metal Droplets and Slag Containing FeO: The Influence of CO Bubbles on the Mass Transfer of Phosphorus in the Metal

    • Kezhuan Gu
    • Neslihan Dogan
    • Kenneth S. Coley

    OriginalPaper 01 September 2017 Pages: 2984 - 3001

    

18. Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Atmospheres: Development of Technique

    • Ata Fallah-Mehrjardi
    • Taufiq Hidayat
    • Evgueni Jak

    OriginalPaper 25 August 2017 Pages: 3002 - 3016

    

19. Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmospheres: Experimental Results at 1473 K (1200 °C) and P(SO₂) = 0.25 atm

    • Ata Fallah-Mehrjardi
    • Taufiq Hidayat
    • Evgueni Jak

    OriginalPaper 25 August 2017 Pages: 3017 - 3026

    

20. Viscosity of Heterogeneous Silicate Melts: A Non-Newtonian Model

    • Zhuangzhuang Liu
    • Bart Blanpain
    • Muxing Guo

    OriginalPaper 07 September 2017 Pages: 3027 - 3037

    

21. A Structural Study on the Foaming Behavior of CaO-SiO₂-MO (MO = MgO, FeO, or Al₂O₃) Ternary Slag System

    • Youngjoo Park
    • Dong Joon Min

    OriginalPaper 29 August 2017 Pages: 3038 - 3046

    

22. Dielectric Properties and Oxidation Roasting of Molybdenite Concentrate by Using Microwave Energy at 2.45 GHz Frequency

    • Jiang Yonglin
    • Liu Bingguo
    • Zhang Libo

    OriginalPaper 05 September 2017 Pages: 3047 - 3057

    

23. Investigation of Origin of Attached Cu-Ag Droplets to Solid Particles During High-Temperature Slag/Copper/Spinel Interactions

    • Inge Bellemans
    • Evelien De Wilde
    • Kim Verbeken

    OriginalPaper 02 October 2017 Pages: 3058 - 3073

    

24. Study of Ferrite During Refinement of Prior Austenite Grains in Microalloyed Steel Continuous Casting

    • Jiang Liu
    • Guanghua Wen
    • Ping Tang

    OriginalPaper 08 August 2017 Pages: 3074 - 3082

    

25. A Review of Permanent Magnet Stirring During Metal Solidification

    • Jie Zeng
    • Weiqing Chen
    • Alexander Mclean

    OriginalPaper 28 August 2017 Pages: 3083 - 3100

    

26. Characteristics of Non-metallic Inclusions in Steel Obtained from Different-Sized Samplers

    • Hang Liao
    • Shufeng Yang
    • Jie Feng

    OriginalPaper 14 September 2017 Pages: 3101 - 3108

    

27. Influence of Forced Flow on the Dendritic Growth of Fe-C Alloy: 3D vs 2D Simulation

    • Weiling Wang
    • Zhaohui Wang
    • Miaoyong Zhu

    OriginalPaper 04 October 2017 Pages: 3109 - 3119

    

28. Mechanism of Macrosegregation Formation in Continuous Casting Slab: A Numerical Simulation Study

    • Dongbin Jiang
    • Weiling Wang
    • Miaoyong Zhu

    OriginalPaper 13 October 2017 Pages: 3120 - 3131

    

29. Single Crystal Casting with Fluidized Carbon Bed Cooling: A Process Innovation for Quality Improvement and Cost Reduction

    • M. Hofmeister
    • M. M. Franke
    • R. F. Singer

    OriginalPaper 10 October 2017 Pages: 3132 - 3142

    

30. Fabrication of Copper-Rich Cu-Al Alloy Using the Wire-Arc Additive Manufacturing Process

    • Bosheng Dong
    • Zengxi Pan
    • Huijun Li

    OriginalPaper 05 September 2017 Pages: 3143 - 3151

    

31. Effect of Melt Temperature on Surface Films Formed on Molten AZ91D Alloy Protected by Graphite Powder

    • Weihong Li
    • Jixue Zhou
    • Yuansheng Yang

    OriginalPaper 07 August 2017 Pages: 3152 - 3160

    

32. Effect of Slotted Anode on Gas Bubble Behaviors in Aluminum Reduction Cell

    • Meijia Sun
    • Baokuan Li
    • Sherman C. P. Cheung

    OriginalPaper 15 August 2017 Pages: 3161 - 3173

    

33. Role of Mechanical Stirring of Al-Mg Melt in the Healing of Bifilm Defect

    • Hamed Bagherpour-Torghabeh
    • Ramin Raiszadeh
    • Hamid Doostmohammadi

    OriginalPaper 15 August 2017 Pages: 3174 - 3184

    

34. Investigation of the Influence of Heat Balance Shifts on the Freeze Microstructure and Composition in Aluminum Smelting Bath System: Cryolite-CaF₂-AlF₃-Al₂O₃

    • Jingjing Liu
    • Ata Fallah-Mehrjardi
    • Mark Taylor

    OriginalPaper 10 October 2017 Pages: 3185 - 3195

    

35. A Mathematical Model for the Multiphase Transport and Reaction Kinetics in a Ladle with Bottom Powder Injection

    • Wentao Lou
    • Miaoyong Zhu

    OriginalPaper 25 August 2017 Pages: 3196 - 3212

    

36. Thermal Conductivity Measurement of Molten Cu-Co Alloy Using an Electromagnetic Levitator Superimposed with a Static Magnetic Field

    • Yuki Nakamura
    • Ryuji Takahashi
    • Hiroyuki Fukuyama

    OriginalPaper 03 October 2017 Pages: 3213 - 3218

    

37. Model Implementation of Boron Removal Using CaCl₂-CaO-SiO₂ Slag System for Solar-Grade Silicon

    • Hui Chen
    • Ye Wang
    • Kazuki Morita

    OriginalPaper 05 October 2017 Pages: 3219 - 3227

    

38. Crystal Phases Formed in a CaO-Fe₂O₃ System Under a High Cooling Rate in Air

    • Yoshiaki Kashiwaya

    OriginalPaper 10 October 2017 Pages: 3228 - 3238

    

39. The Importance of Slag Structure to Boron Removal from Silicon during the Refining Process: Insights from Raman and Nuclear Magnetic Resonance Spectroscopy Study

    • Guoyu Qian
    • Zhi Wang
    • Liyuan Sun

    OriginalPaper 10 October 2017 Pages: 3239 - 3250

    

40. Experimental Study on the Activities of Al and Ca in Ferrosilicon

    • Silvia Tomé-Torquemada
    • Björn Glaser
    • Du Sichen

    OriginalPaper Open access 31 October 2017 Pages: 3251 - 3258

    

41. Effect of Joining Atmosphere in Transient Liquid Phase Bonding of Inconel 617 Superalloy

    • H. Esmaeili
    • S. E. Mirsalehi
    • A. Farzadi

    OriginalPaper 03 October 2017 Pages: 3259 - 3269

    

42. Use of Friction Stir Processing for Improving Heat-Affected Zone Liquation Cracking Resistance of a Cast Magnesium Alloy AZ91D

    • G. M. Karthik
    • G. D. Janaki Ram
    • Ravi Sankar Kottada

    OriginalPaper 05 October 2017 Pages: 3270 - 3280

    

43. A Gibbs Energy Minimization Approach for Modeling of Chemical Reactions in a Basic Oxygen Furnace

    • Ari Kruskopf
    • Ville-Valtteri Visuri

    OriginalPaper 31 August 2017 Pages: 3281 - 3300

    

44. Modeling of Radiative Heat Transfer in an Electric Arc Furnace

    • Florian Opitz
    • Peter Treffinger
    • Jürgen Wöllenstein

    OriginalPaper 30 August 2017 Pages: 3301 - 3315

    

45. Thermal Modeling of the Injection of Standard and Thermally Insulated Cored Wire

    • E.-I. Castro-Cedeno
    • A. Jardy
    • J. P. Bellot

    OriginalPaper 29 September 2017 Pages: 3316 - 3328

    

46. Modeling and Simulation of the Off-gas in an Electric Arc Furnace

    • Thomas Meier
    • Karima Gandt
    • Herbert Pfeifer

    OriginalPaper 28 September 2017 Pages: 3329 - 3344

    

47. Numerical Research on Magnetic Field, Temperature Field and Flow Field During Melting and Directionally Solidifying TiAl Alloys by Electromagnetic Cold Crucible

    • Ruirun Chen
    • Yaohua Yang
    • Hengzhi Fu

    OriginalPaper 21 August 2017 Pages: 3345 - 3358

    

48. Experimental Study on Electrical Conductivity of MnO-CaO-SiO₂ Slags at 1723 K to 1823 K (1450 °C to 1550 °C) and Various Oxygen Potentials

    • Jun-Hao Liu
    • Guo-Hua Zhang
    • Zhi Wang

    OriginalPaper 05 September 2017 Pages: 3359 - 3363

    

49. Characterization of Inclusion Populations in Mn-Si Deoxidized Steel

    • Alfonso García-Carbajal
    • Martín Herrera-Trejo
    • Arturo-Isaias Martinez-Enriquez

    OriginalPaper 21 August 2017 Pages: 3364 - 3379

    

50. Solvent Extraction of Rare Earth Elements from a Nitric Acid Leach Solution of Apatite by Mixtures of Tributyl Phosphate and Di-(2-ethylhexyl) Phosphoric Acid

    • Ali Ferdowsi
    • Hossein Yoozbashizadeh

    OriginalPaper 25 September 2017 Pages: 3380 - 3387