1. Aging Enhanced Super-Elasticity and Ductility of a Cold NiTiTa Alloy

   • Song Cai
   • Jeremy E. Schaffer
   • Yang Ren

   Brief Communication 15 June 2022 Pages: 3205 - 3209

   

2. Achieving High-Quality Tungsten–Copper Composites Via Deformation-Driven Metallurgy

   • Ranzhuoluo Zang
   • Yuming Xie
   • Long Wan

   Brief Communication 22 July 2022 Pages: 3210 - 3215

   

3. Nitrogen-Induced Phase Separation in Equiatomic FeNiCo Medium Entropy Alloy

   • S. A. R. Qadri
   • K. N. Sasidhar
   • S. R. Meka

   Brief Communication 28 June 2022 Pages: 3216 - 3223

   

4. Reduction of Freckle Defect in Single-Crystal Blade Root by Controlling Local Cooling Conditions

   • Dariusz Szeliga

   Brief Communication 26 June 2022 Pages: 3224 - 3231

   

5. Transformation During Aging of Niobium-Rich Carbides in Cast Heat-Resistant Alloys

   • Rosa Ortega-Reyes
   • Sergio Haro-Rodríguez
   • Rafael Colás

   Brief Communication 30 June 2022 Pages: 3232 - 3238

   

6. Intercritical Austenite Formation and Decomposition in the Coarse Grain Heat-Affected Zone of an X80 Line Pipe Steel

   • Tianbi Zhang
   • Sabyasachi Roy
   • Matthias Militzer

   Brief Communication 02 August 2022 Pages: 3239 - 3244

   

7. Development and Evaluation of Dissimilar Gas Tungsten Arc-Welded Joint of P92 Steel/Inconel 617 Alloy for Advanced Ultra-Supercritical Boiler Applications

   • A. Kumar
   • C. Pandey

   Original Research Article 12 July 2022 Pages: 3245 - 3273

   

8. Icosahedral Ordering Induced by Cr in Al–Zn Alloy Liquid

   • Saichao Cao
   • Long Zeng
   • Jianguo Li

   Original Research Article 16 June 2022 Pages: 3274 - 3284

   

9. Microstructure and Tribological Performances of Laser Cladded Ni–Mo–Cr₃C₂ Coatings Under Grease-Lubrication Condition

   • Zhu Weixin
   • Kong Dejun

   Original Research Article 17 June 2022 Pages: 3285 - 3295

   

10. The Effect of Small Additions of Fe and Heavy Deformation on the Precipitation in an Al–1.1Mg–0.5Cu–0.3Si At. Pct Alloy

    • Elisabeth Thronsen
    • Hanne Mørkeseth
    • Randi Holmestad

    Original Research Article Open access 04 July 2022 Pages: 3296 - 3310

    

11. Tag-and-Trace Method of α-Al Crystals Applied to Study Solidification and Casting of Aluminum Alloys

    • Jorge Santos
    • Anders E. W. Jarfors
    • Arne K. Dahle

    Original Research Article Open access 24 June 2022 Pages: 3311 - 3320

    

12. Heterogeneity and Solidification Pathways in Additively Manufactured 316L Stainless Steels

    • Amy J. Godfrey
    • J. Simpson
    • S. S. Babu

    Original Research Article 08 July 2022 Pages: 3321 - 3340

    

13. Investigating the Effects of Dendrite Evolution on Microsegregation in Al–Cu Alloys by Coupling Experiments, Micro-modeling, and Phase-Field Simulations

    • Zhenjie Yao
    • David Montiel
    • John Allison

    Original Research Article 22 June 2022 Pages: 3341 - 3356

    

14. Multi-dimensional Effect of Heat Treatment on Microstructure and Property of Ti₆Al₄V Alloy Fabricated by Selective Electron Beam Melting

    • Junyi Huang
    • Yang Yang
    • Yanan Fu

    Original Research Article 26 June 2022 Pages: 3357 - 3368

    

15. Physical Understanding of Active Control of Beam Scanning in Preventing Top Concavity in Electron Beam Welding

    • Manlelan Luo
    • Andrey P. Sliva
    • Shengyong Pang

    Original Research Article 02 July 2022 Pages: 3369 - 3380

    

16. On the Role of Deformation and Cracking in the Cold Spray Processing of Refractory Ta Powders Onto Ta or 4340 Steel Substrates: Effects of Topical Oxide Layers and Spray Velocity

    • R. A. Ahmed
    • V. Rahneshin
    • W. O. Soboyejo

    Original Research Article 01 July 2022 Pages: 3381 - 3391

    

17. Calculation and Use of Variable Diffusivity for the Analysis of Transient Liquid Phase Bonding Behavior

    • O. C. Afolabi
    • H. Sada
    • O. A. Ojo

    Original Research Article 23 July 2022 Pages: 3392 - 3403

    

18. Effect of Cryogenic Thermal Cycling on Tribocorrosion Performance of Fe-Based Bulk Amorphous Alloy in 3.5 Pct NaCl Solution

    • Juan Jin
    • Xiulin Ji
    • Weiwei Zhu

    Original Research Article 06 July 2022 Pages: 3404 - 3417

    

19. Effect of Carbon Content on Variant Pairing in Bainitic Low Alloy Steel

    • Adam Ståhlkrantz
    • Peter Hedström
    • Annika Borgenstam

    Original Research Article Open access 07 July 2022 Pages: 3418 - 3427

    

20. The Effect of Grain Size Gradient on Plastic Deformation of Gradient Aluminum

    • Hao Lyu
    • Yaxin Zhang
    • Haoshuai Li

    Original Research Article 24 July 2022 Pages: 3428 - 3440

    

21. Improvement of Creep Behavior Prediction Using Threshold Stress and Tensile Properties: Introduction of the TTC Relations

    • Xu Zhao
    • Xuming Niu
    • Zhigang Sun

    Original Research Article 24 July 2022 Pages: 3441 - 3455

    

22. Medium Mn Dual-Phase Nanotwinned Steel

    • X. K. Shang
    • Q. W. Guan
    • B. B. He

    Original Research Article 23 July 2022 Pages: 3456 - 3464

    

23. Effect of Ni Content on Solidification Behavior and Hot-Tearing Susceptibility of Co–Ni–Al–W-Based Superalloys

    • Xiaozhou Zhou
    • Yuheng Zhang
    • Jianxin Xie

    Original Research Article 09 July 2022 Pages: 3465 - 3477

    

24. Step-by-Step Observation of Secondary-Phase Evolution During the Casting Cracking Process in Mg–Ce–Al Alloys

    • Bo Hu
    • Dejiang Li
    • Xiaoqin Zeng

    Original Research Article 28 July 2022 Pages: 3478 - 3492

    

25. Crucial Microstructural Features to Determine the Mechanical Properties of Welded Joints in a Cu-Containing Low-Carbon Low-Alloy Steel After Postweld Heat Treatment

    • Jinliang Wang
    • Guangqi Dong
    • Liqing Chen

    Original Research Article 30 July 2022 Pages: 3493 - 3505