1. Simultaneous Grain Growth and Grain Refinement in Bulk Ultrafine-Grained Copper under Tensile Deformation at Room Temperature

   • Hailiang Yu
   • Cheng Lu
   • Xing Zhao

   Communication 01 June 2016 Pages: 3785 - 3789

   

2. Grain Refinement of a Large-Scale Al Alloy Casting by Introducing the Multiple Ultrasonic Generators During Solidification

   • Ruiqing Li
   • Zhilin Liu
   • Pinghu Chen

   Communication 26 May 2016 Pages: 3790 - 3796

   

3. Modified Methodology for the Quench Temperature Selection in Quenching and Partitioning (Q&P) Processing of Steels

   • Eun Jung Seo
   • Lawrence Cho
   • Bruno C. De Cooman

   Communication 07 June 2016 Pages: 3797 - 3802

   

4. Letter to the Editor

   • John Campbell

   Communication 15 June 2016 Pages: 3803 - 3805

5. Response by M.A. Kaplan and G.E. Fuchs

   • Gerhard E. Fuchs
   • Max A. Kaplan

   Communication 15 June 2016 Pages: 3806 - 3809

6. Foreword

   • John S. Carpenter
   • Allison M. Beese
   • James Sears

   Symposium: Additive Manufacturing: Building the Pathway to Process and Material Qualification 14 June 2016 Pages: 3810 - 3810

7. Powder Bed Layer Characteristics: The Overseen First-Order Process Input

   • H. W. Mindt
   • M. Megahed
   • S. G. R. Brown

   Symposium: Additive Manufacturing: Building the Pathway to Process and Material Qualification 01 April 2016 Pages: 3811 - 3822

   

8. Empirical Approach to Understanding the Fatigue Behavior of Metals Made Using Additive Manufacturing

   • David B. Witkin
   • Thomas V. Albright
   • Dhruv N. Patel

   Symposium: Additive Manufacturing: Building the Pathway to Process and Material Qualification 13 April 2016 Pages: 3823 - 3836

   

9. Study of Internal Channel Surface Roughnesses Manufactured by Selective Laser Melting in Aluminum and Titanium Alloys

   • Jukka Pakkanen
   • Flaviana Calignano
   • Paolo Fino

   Symposium: Additive Manufacturing: Building the Pathway to Process and Material Qualification 22 April 2016 Pages: 3837 - 3844

   

10. Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization

    • Amrita Basak
    • Ranadip Acharya
    • Suman Das

    Symposium: Additive Manufacturing: Building the Pathway to Process and Material Qualification 14 June 2016 Pages: 3845 - 3859

    

11. Multicomponent High-Strength Low-Alloy Steel Precipitation-Strengthened by Sub-nanometric Cu Precipitates and M₂C Carbides

    • Divya Jain
    • Dieter Isheim
    • David N. Seidman

    OriginalPaper 26 May 2016 Pages: 3860 - 3872

    

12. Phase Field Modeling of Cyclic Austenite-Ferrite Transformations in Fe-C-Mn Alloys

    • Hao Chen
    • Benqiang Zhu
    • Matthias Militzer

    OriginalPaper 09 June 2016 Pages: 3873 - 3881

    

13. Burst Ductility of Zirconium Clads: The Defining Role of Residual Stress

    • Gulshan Kumar
    • A. K. Kanjarla
    • Indradev Samajdar

    OriginalPaper 09 May 2016 Pages: 3882 - 3896

    

14. A Computational Investigation on Bending Deformation Behavior at Various Deflection Rates for Enhancement of Absorbable Energy in TRIP Steel

    • Hang Thi Pham
    • Takeshi Iwamoto

    OriginalPaper 24 May 2016 Pages: 3897 - 3911

    

15. The Cause of Premature Tensile Fracture of Gas-Nitrocarburized Steel

    • Jaeyoon Hwang
    • Jeongho Han
    • Young-Kook Lee

    OriginalPaper 25 May 2016 Pages: 3912 - 3918

    

16. Transverse and z-Direction CVN Impact Tests of X65 Line Pipe Steels of Two Centerline Segregation Ratings

    • Lihong Su
    • Huijun Li
    • Xianyong Qu

    OriginalPaper 02 June 2016 Pages: 3919 - 3932

    

17. Inhomogeneity of Microstructure and Damping Capacity of a FC25 Disc-Brake Rotor and Their Interrelationship

    • Jongbin Park
    • Jeongho Han
    • Young-Kook Lee

    OriginalPaper 15 June 2016 Pages: 3933 - 3942

    

18. The Deformation Behavior Analysis and Mechanical Modeling of Step/Intercritical Quenching and Partitioning-Treated Multiphase Steels

    • Hongshan Zhao
    • Wei Li
    • Xuejun Jin

    OriginalPaper 14 June 2016 Pages: 3943 - 3955

    

19. Effects of Thermal Aging on Material Properties, Stress Corrosion Cracking, and Fracture Toughness of AISI 316L Weld Metal

    • Timothy Lucas
    • Antti Forsström
    • Hannu Hänninen

    OriginalPaper 14 June 2016 Pages: 3956 - 3970

    

20. Microstructural Evolution of Cu/Solder/Cu Pillar-Type Structures with Different Diffusion Barriers

    • Hsi-Kuei Cheng
    • Yu-Jie Lin
    • Tzeng-Feng Liu

    OriginalPaper 08 June 2016 Pages: 3971 - 3980

    

21. Effect of Process Variables on the Inertia Friction Welding of Superalloys LSHR and Mar-M247

    • D. W. Mahaffey
    • O. N. Senkov
    • S. L. Semiatin

    OriginalPaper 08 June 2016 Pages: 3981 - 4000

    

22. Effect of Plastic Pre-straining on Residual Stress and Composition Profiles in Low-Temperature Surface-Hardened Austenitic Stainless Steel

    • Federico Bottoli
    • Thomas L. Christiansen
    • Marcel A. J. Somers

    OriginalPaper 15 June 2016 Pages: 4001 - 4011

    

23. On the Crystallization of Compacted and Chunky Graphite from Liquid Multicomponent Iron-Carbon-Silicon-Based Melts

    • D. M. Stefanescu
    • R. Huff
    • R. Suarez

    OriginalPaper 05 May 2016 Pages: 4012 - 4023

    

24. The Influences of Grain Size and Morphology on the Hot Tearing Susceptibility, Contraction, and Load Behaviors of AA7050 Alloy Inoculated with Al-5Ti-1B Master Alloy

    • Y. Li
    • Q. L. Bai
    • L. Z. Zhuang

    OriginalPaper 09 May 2016 Pages: 4024 - 4037

    

25. High Magnetic Field-Induced Formation of Banded Microstructures in Lamellar Eutectic Alloys During Directional Solidification

    • Xi Li
    • Yves Fautrelle
    • Rene Moreau

    OriginalPaper 01 June 2016 Pages: 4038 - 4052

    

26. Study of Hot Tearing During Steel Solidification Through Ingot Punching Test and Its Numerical Simulation

    • Takao Koshikawa
    • Michel Bellet
    • Manuel Bobadilla

    OriginalPaper 06 June 2016 Pages: 4053 - 4067

    

27. A Study of the Oscillation Marks’ Characteristics of Continuously Cast Incoloy Alloy 825 Blooms

    • Saud Saleem
    • Michael Vynnycky
    • Hasse Fredriksson

    OriginalPaper 06 June 2016 Pages: 4068 - 4079

    

28. Roles of Alloy Composition and Grain Refinement on Hot Tearing Susceptibility of 7××× Aluminum Alloys

    • Q. L. Bai
    • Y. Li
    • L. Z. Zhuang

    OriginalPaper 15 June 2016 Pages: 4080 - 4091

    

29. Effect of Phosphorus on the Grain Boundary Cohesion and γ′ Precipitation in IN706 alloy

    • Sha Zhang
    • Xin Xin
    • Xiaofeng Sun

    OriginalPaper 25 May 2016 Pages: 4092 - 4103

    

30. Influence of Pressure and Temperature on Microstructure and Mechanical Behavior of Squeeze Cast Mg-10Gd-3Y-0.5Zr Alloy

    • Cunlong Wang
    • Enrique J. Lavernia
    • Wenjiang Ding

    OriginalPaper 13 May 2016 Pages: 4104 - 4115

    

31. Microstructure Evolution of Biphasic TiNi_1+x Sn Thermoelectric Materials

    • Nisha Verma
    • Jason E. Douglas
    • Carlos G. Levi

    OriginalPaper 10 May 2016 Pages: 4116 - 4127

    

32. The Effect of Hot Deformation Parameters on Microstructure Evolution of the α-Phase in Ti-6Al-4V

    • Bama Perumal
    • Martin A. Rist
    • Michael E. Fitzpatrick

    OriginalPaper Open access 13 May 2016 Pages: 4128 - 4136

    

33. The Effect of Homogenization Heat Treatment on Thermal Expansion Coefficient and Dimensional Stability of Low Thermal Expansion Cast Irons

    • Li-Hao Chen
    • Zong-Pei Liu
    • Yung-Ning Pan

    OriginalPaper 16 May 2016 Pages: 4137 - 4145

    

34. Low-Temperature Nitriding of Deformed Austenitic Stainless Steels with Various Nitrogen Contents Obtained by Prior High-Temperature Solution Nitriding

    • Federico Bottoli
    • Grethe Winther
    • Marcel A. J. Somers

    OriginalPaper 24 May 2016 Pages: 4146 - 4159

    

35. Probing Formability Improvement of Ultra-thin Ferritic Stainless Steel Bipolar Plate of PEMFC in Non-conventional Forming Process

    • Hyuk Jong Bong
    • Frédéric Barlat
    • Myoung-Gyu Lee

    OriginalPaper 23 May 2016 Pages: 4160 - 4174

    

36. Influence of Composition and Hot Rolling on the Subsurface Microstructure and Bendability of Ultrahigh-Strength Strip

    • Antti Juhani Kaijalainen
    • Mia Liimatainen
    • David A. Porter

    OriginalPaper 03 June 2016 Pages: 4175 - 4188

    

37. Recovery Kinetics in Commercial Purity Aluminum Deformed to Ultrahigh Strain: Model and Experiment

    • Tianbo Yu
    • Niels Hansen

    OriginalPaper 06 June 2016 Pages: 4189 - 4196

    

38. Effect of Process Parameters on Microstructure and Hardness of Oxide Dispersion Strengthened 18Cr Ferritic Steel

    • M. Nagini
    • R. Vijay
    • G. Sundararajan

    OriginalPaper 08 June 2016 Pages: 4197 - 4209

    

39. Microstructural Evolutions During Annealing of Plastically Deformed AISI 304 Austenitic Stainless Steel: Martensite Reversion, Grain Refinement, Recrystallization, and Grain Growth

    • Meysam Naghizadeh
    • Hamed Mirzadeh

    OriginalPaper 06 June 2016 Pages: 4210 - 4216

    

40. Application of a Pore Fraction Hot Tearing Model to Directionally Solidified and Direct Chill Cast Aluminum Alloys

    • Ruifeng Dou
    • A. B. Phillion

    OriginalPaper 08 June 2016 Pages: 4217 - 4225

    

41. Al-Ti Particulate Composite: Processing and Studies on Particle Twinning, Microstructure, and Thermal Stability

    • Devinder Yadav
    • Ranjit Bauri
    • Jens Freudenberger

    OriginalPaper 08 June 2016 Pages: 4226 - 4238

    

42. Fatigue Properties of Cast Magnesium Wheels

    • Zhenming Li
    • Alan A. Luo
    • Peng Zhang

    OriginalPaper 20 May 2016 Pages: 4239 - 4257

    

43. Creep Properties of the As-Cast Al-A319 Alloy: T4 and T7 Heat Treatment Effects

    • Hamid R. Erfanian-Naziftoosi
    • Ernesto J. Rincón
    • Hugo F. López

    OriginalPaper 18 May 2016 Pages: 4258 - 4267

    

44. Microstructure Evolution in the Near-Surface Region During Homogenization of a Twin-Roll Cast AlFeMnSi Alloy

    • Junjie Wang
    • Xiaorong Zhou
    • Yudie Yuan

    OriginalPaper Open access 01 June 2016 Pages: 4268 - 4275

    

45. Developing a Basal Texture with Two Peaks Tilting Towards the Transverse Direction in Hot Rolled Mg-5.7Zn-0.5Zr Plates

    • Yannan Wang
    • Yunchang Xin
    • Qing Liu

    OriginalPaper 15 June 2016 Pages: 4276 - 4286

    

46. Solute-Derived Thermal Stabilization of Nano-sized Grains in Melt-Spun Aluminum

    • A. H. Baker
    • P. G. Sanders
    • S. L. Kampe

    OriginalPaper 02 June 2016 Pages: 4287 - 4300

    

47. Study of the Induced Anisotropy in Field Annealed Hitperm Alloys by Mössbauer Spectroscopy and Kerr Microscopy

    • J. S. Blázquez
    • J. Marcin
    • I. Skorvanek

    OriginalPaper 19 May 2016 Pages: 4301 - 4305

    

48. Processing and Characterization of Functionally Graded Aluminum (A319)—SiC_p Metallic Composites by Centrifugal Casting Technique

    • E. Jayakumar
    • Jibin C. Jacob
    • B. C. Pai

    OriginalPaper 01 June 2016 Pages: 4306 - 4315

    

49. Electrodeposition of Nanostructured Permalloy and Permalloy-Magnetite Composite Coatings and Investigation of Their Magnetic Properties

    • Sara Fazli
    • M. E. Bahrololoom

    OriginalPaper 07 June 2016 Pages: 4316 - 4324

    

50. Coupled Model for Carbon Partitioning from Martensite into Austenite During the Quenching Process in Fe-C Steels

    • Peixing Liu
    • Bin Zhu
    • Yisheng Zhang

    OriginalPaper 19 May 2016 Pages: 4325 - 4333