1. Influence of the Initial Microstructure on the Heat Treatment Response and Tensile Properties of TRIP-Assisted Steel

   • Kyooyoung Lee
   • Joo Hyun Ryu
   • Dong-Woo Suh

   Communication 23 August 2016 Pages: 5259 - 5265

   

2. An Investigation Into 6-Fold Symmetry in Martensitic Steels

   • Christopher Kinney
   • Ken Pytlewski
   • J. W. Morris Jr.

   Communication 15 August 2016 Pages: 5266 - 5270

   

3. Foreword

   • Andrea García-Junceda
   • María Jesús Santofimia

   Symposium: New Steels for Applications under Extreme Conditions 16 September 2016 Pages: 5271 - 5271

4. Fatigue Hardening Behavior of 1.5 GPa Grade Transformation-Induced Plasticity-Aided Martensitic Steel

   • Koh-Ichi Sugimoto
   • Tomohiko Hojo

   Symposium: New Steels for Applications under Extreme Conditions 11 April 2016 Pages: 5272 - 5279

   

5. Continuous Hardening During Isothermal Aging at 723 K (450 °C) of a Precipitation Hardening Stainless Steel

   • Carola Celada-Casero
   • Jesús Chao
   • David San Martin

   Symposium: New Steels for Applications under Extreme Conditions 29 June 2016 Pages: 5280 - 5287

   

6. Effect of Prior Austenite Grain Size Refinement by Thermal Cycling on the Microstructural Features of As-Quenched Lath Martensite

   • Javier Hidalgo
   • Maria Jesus Santofimia

   Symposium: New Steels for Applications under Extreme Conditions Open access 05 May 2016 Pages: 5288 - 5301

   

7. Extremely Low-Stress Triaxiality Tests in Calibration of Fracture Models in Metal-Cutting Simulation

   • František Šebek
   • Petr Kubík
   • Jiří Hůlka

   Symposium: New Steels for Applications under Extreme Conditions 15 April 2016 Pages: 5302 - 5312

   

8. Alternative Fabrication Routes toward Oxide-Dispersion-Strengthened Steels and Model Alloys

   • Frank Bergner
   • Isabell Hilger
   • Thomas Weissgärber

   Symposium: New Steels for Applications under Extreme Conditions 25 July 2016 Pages: 5313 - 5324

   

9. On the Role of Alloy Composition and Sintering Parameters in the Bimodal Grain Size Distribution and Mechanical Properties of ODS Ferritic Steels

   • Andrea García-Junceda
   • Mónica Campos
   • José Manuel Torralba

   Symposium: New Steels for Applications under Extreme Conditions 28 April 2016 Pages: 5325 - 5333

   

10. Microstructure and Mechanical Properties of Ultrafine-Grained Austenitic Oxide Dispersion Strengthened Steel

    • Xiaodong Mao
    • Suk Hoon Kang
    • Jinsung Jang

    Symposium: New Steels for Applications under Extreme Conditions 01 June 2016 Pages: 5334 - 5343

    

11. Nano-precipitation Strengthened G91 by Thermo-mechanical Treatment Optimization

    • J. Vivas
    • C. Celada-Casero
    • C. Capdevila

    Symposium: New Steels for Applications under Extreme Conditions 06 June 2016 Pages: 5344 - 5351

    

12. Influence of the Initial Microstructure on the Reverse Transformation Kinetics and Microstructural Evolution in Transformation-Induced Plasticity–Assisted Steel

    • Jeong In Kim
    • Joo Hyun Ryu
    • Dong-Woo Suh

    OriginalPaper 30 August 2016 Pages: 5352 - 5361

    

13. Study of the Eutectoid Transformation in Nodular Cast Irons in Relation to Solidification Microsegregation

    • Alexandre Freulon
    • Philippe de Parseval
    • Jacques Lacaze

    OriginalPaper 12 August 2016 Pages: 5362 - 5371

    

14. Effect of Strain-Induced Age Hardening on Yield Strength Improvement in Ferrite-Austenite Duplex Lightweight Steels

    • Hyejin Song
    • Seok Gyu Lee
    • Sunghak Lee

    OriginalPaper 16 August 2016 Pages: 5372 - 5382

    

15. Exploring the Phase Transformation in β-Quenched Ti-55531 Alloy During Continuous Heating via Dilatometric Measurement, Microstructure Characterization, and Diffusion Analysis

    • Fuwen Chen
    • Guanglong Xu
    • Kechao Zhou

    OriginalPaper 16 August 2016 Pages: 5383 - 5394

    

16. Serration Behavior of a Zr-Based Metallic Glass Under Different Constrained Loading Conditions

    • G. N. Yang
    • J. L. Gu
    • K. F. Yao

    OriginalPaper 31 August 2016 Pages: 5395 - 5400

    

17. Grain Size Hardening Effects in Mg-Gd Solid Solutions

    • Devarajan Nagarajan
    • Carlos H. Cáceres
    • John R. Griffiths

    OriginalPaper 12 August 2016 Pages: 5401 - 5408

    

18. A New Venue Toward Predicting the Role of Hydrogen Embrittlement on Metallic Materials

    • Burak Bal
    • Ibrahim Sahin
    • Demircan Canadinc

    OriginalPaper 16 August 2016 Pages: 5409 - 5422

    

19. Effect of Boron Addition on Microstructural Evolution and Room-Temperature Mechanical Properties of Novel Fe_66−x CrNiB _x Si (x = 0, 0.25, 0.50 and 0.75 Wt Pct) Advanced High-Strength Steels

    • Mohsen Askari-Paykani
    • Hamid Reza Shahverdi
    • Reza Miresmaeili

    OriginalPaper 16 August 2016 Pages: 5423 - 5437

    

20. Effect of Weld Characteristic on Mechanical Strength of Laser-Arc Hybrid-Welded Al-Mg-Si-Mn Aluminum Alloy

    • Chen Zhang
    • Ming Gao
    • Xiaoyan Zeng

    OriginalPaper 22 August 2016 Pages: 5438 - 5449

    

21. Effects of Cr₂O₃ Activating Flux on the Plasma Plume in Pulsed Laser Welding

    • Luo Yi
    • Du Yunfei
    • Han Jingtao

    OriginalPaper 23 August 2016 Pages: 5450 - 5460

    

22. Formation of Intermetallic Compounds During Explosive Welding

    • Bella A. Greenberg
    • Mikhail A. Ivanov
    • Vladimir I. Lysak

    OriginalPaper 23 August 2016 Pages: 5461 - 5473

    

23. The Effect of Bi on the Selective Oxide Formation on CMnSi TRIP Steel

    • Jonghan Oh
    • Lawrence Cho
    • Bruno C. De Cooman

    OriginalPaper 29 August 2016 Pages: 5474 - 5486

    

24. On the Tendency of the Co-, Ni-, and Fe-Based Melts to the Bulk Amorphization

    • Irina V. Sterkhova
    • Vladimir I. Lad’yanov
    • Pavel P. Umnov

    OriginalPaper 01 September 2016 Pages: 5487 - 5495

    

25. Analysis on the Deflection Angle of Columnar Dendrites of Continuous Casting Steel Billets Under the Influence of Mold Electromagnetic Stirring

    • Xincheng Wang
    • Shengqian Wang
    • Xuefeng Liu

    OriginalPaper 24 August 2016 Pages: 5496 - 5509

    

26. Influence of Melt Superheat, Sr Modifier, and Al-5Ti-1B Grain Refiner on Microstructural Evolution of Secondary Al-Si-Cu Alloys

    • Jovid Rakhmonov
    • Giulio Timelli
    • Franco Bonollo

    OriginalPaper 15 August 2016 Pages: 5510 - 5521

    

27. Numerical and Experimental Investigation of the Innovatory Incremental-Forming Process Dedicated to the Aerospace Industry

    • Joanna Szyndler
    • Franciszek Grosman
    • Lukasz Madej

    OriginalPaper Open access 02 May 2016 Pages: 5522 - 5533

    

28. Influence of Cycle Temperature on the Wear Resistance of Vermicular Iron Derivatized with Bionic Surfaces

    • Qi Sui
    • Peng Zhang
    • Luquan Ren

    OriginalPaper 18 August 2016 Pages: 5534 - 5547

    

29. Two-Phase Master Sintering Curve for 17-4 PH Stainless Steel

    • Im Doo Jung
    • Sangyul Ha
    • Randall M. German

    OriginalPaper 12 August 2016 Pages: 5548 - 5556

    

30. Numerical Simulation of Solidification, Homogenization, and Precipitation in an Industrial Ni-Based Superalloy

    • Luc Rougier
    • Alain Jacot
    • Virginie Jaquet

    OriginalPaper 18 August 2016 Pages: 5557 - 5568

    

31. Modeling the Capillary Pressure for the Migration of the Liquid Phase in Granular Solid–Liquid–Vapor Systems: Application to the Control of the Composition Profile in W-Cu FGM Materials

    • Jean-Michel Missiaen
    • Jean-Joël Raharijaona
    • Francis Delannay

    OriginalPaper 29 August 2016 Pages: 5569 - 5579

    

32. Correlation of Thermally Induced Pores with Microstructural Features Using High Energy X-rays

    • David B. Menasche
    • Paul A. Shade
    • Robert M. Suter

    OriginalPaper 29 August 2016 Pages: 5580 - 5588

    

33. Effect of Grain Boundary Character Distribution on the Adiabatic Shear Susceptibility

    • Yang Yang
    • Lihong Jiang
    • Qingming Zhang

    OriginalPaper 17 August 2016 Pages: 5589 - 5597

    

34. Elasto-Plastic-Creep Constitutive Equation of an Al-Si-Cu High-Pressure Die Casting Alloy for Thermal Stress Analysis

    • Yuichi Motoyama
    • Hidetoshi Shiga
    • Makoto Yoshida

    OriginalPaper 25 August 2016 Pages: 5598 - 5608

    

35. A Study on the Electrodeposited Cu-Zn Alloy Thin Films

    • Rasim Özdemir
    • İsmail Hakkı Karahan
    • Orhan Karabulut

    OriginalPaper 06 September 2016 Pages: 5609 - 5617

    

36. Texture Analyses of Ti/Al₂O₃ Nanocomposite Produced Using Friction Stir Processing

    • Aziz Shafiei-Zarghani
    • Seyed Farshid Kashani-Bozorg
    • Adrian P. Gerlich

    OriginalPaper 29 August 2016 Pages: 5618 - 5629

    

37. Microstructure and Mechanical Properties of Aluminum-Alumina Bulk Nanocomposite Produced by a Novel Two-Step Ultrasonic Casting Technique

    • H. M. Vishwanatha
    • Jayakumar Eravelly
    • Sudipto Ghosh

    OriginalPaper 06 September 2016 Pages: 5630 - 5640

    

38. Measurements and Modeling of Stress in Precipitation-Hardened Aluminum Alloy AA2618 during Gleeble Interrupted Quenching and Constrained Cooling

    • Nicolas Chobaut
    • Denis Carron
    • Jean-Marie Drezet

    OriginalPaper 29 August 2016 Pages: 5641 - 5649

    

39. Tool Steel Heat Treatment Optimization Using Neural Network Modeling

    • Bojan Podgornik
    • Igor Belič
    • Matjaz Godec

    OriginalPaper 18 August 2016 Pages: 5650 - 5659