Measurement of the lattice misfit of the nickel-base superalloy SC16 by high-energy synchrotron radiation G. BrunoG. SchumacherC. Schulze OriginalPaper Pages: 193 - 197
Phase equilibria of the ternary Al-Cu-Ni system and interfacial reactions of related systems at 800 °C Chao-Hong WangSinn-Wen ChenJen-Chin Wu OriginalPaper Pages: 199 - 209
An analysis of retained austenite in austempered ductile iron L. C. Chang OriginalPaper Pages: 211 - 217
Constrained phase-transformation of a TiNi shape-memory alloy Y. LiH. B. XuD. Z. Yang OriginalPaper Pages: 219 - 223
On the fracture and fatigue properties of Mo-Mo3Si-Mo5SiB2 refractory intermetallic alloys at ambient to elevated temperatures (25 °C to 1300 °C) H. ChoeJ. H. SchneibelR. O. Ritchie OriginalPaper Pages: 225 - 239
Influence of thermomechanical treatments on the microstructure and mechanical properties of HSLA-100 steel plates S. K. DhuaD. MukerjeeD. S. Sarma OriginalPaper Pages: 241 - 253
Relaxation mechanisms in Fe-Al-C alloys I. S. GolovinD. MukherjiN. Y. Rokhmanov OriginalPaper Pages: 255 - 266
Improvement in fracture toughness of Ti-4.5Al-3V-2Mo-2Fe through microstructural optimization GunawarmanMitsuo NinomiToshihiko Kazino OriginalPaper Pages: 267 - 275
Morphological healing evolution of intragranular penny-shaped microcracks by surface diffusion: Part I. Simulation P. Z. HuangJ. SunH. Gao OriginalPaper Pages: 277 - 285
Morphological healing evolution of intragranular penny-shaped microcracks by surface diffusion: Part II. Experiments H. L. ZhangJ. SunH. Gao OriginalPaper Pages: 287 - 294
The influence of microstructure and strain rate on the compressive deformation behavior of Ti-6Al-4V A. J. Wagoner JohnsonC. W. BullC. L. Briant OriginalPaper Pages: 295 - 306
Orientation dependence of dislocation structures in cyclically deformed Cu-16 At. Pct Al alloy single crystals X. W. LiX. M. WuY. Umakoshi OriginalPaper Pages: 307 - 318
A constitutive description of an aluminum-0.32 Pct iron under hot-deformation conditions Elis S. Puchi-Cabrera OriginalPaper Pages: 319 - 326
Internal hydrogen embrittlement of ultrahigh-strength AERMET 100 steel Richard L. S. ThomasJohn R. ScullyRichard P. Gangloff OriginalPaper Pages: 327 - 344
Microscale investigations of the metal-dusting corrosion mechanism on mild steel Bernd SchmidRolf ØdegårdØystein Grong OriginalPaper Pages: 345 - 354
X-ray photoelectron spectroscopy and scanning auger microprobe studies on oxidation-induced embrittlement mechanism of liquid-phase-sintered 95W-Ni-Fe alloy Jiahe AiFei He OriginalPaper Pages: 355 - 359
Effects of indium on the mechanical properties of ternary Sn-In-Ag solders M. S. Yeh OriginalPaper Pages: 361 - 365
Growth of solutal dendrites: A cellular automaton model and its quantitative capabilities Lazaro Beltran-SanchezDoru M. Stefanescu OriginalPaper Pages: 367 - 382
A new analytical approach to predict spacing selection in lamellar and rod eutectic systems Adrian V. CatalinaSubhayu SenDoru M. Stefanescu OriginalPaper Pages: 383 - 394
Cellular-to-dendritic transition during the directional solidification of binary alloys R. TrivediYunzue ShenShan Liu OriginalPaper Pages: 395 - 401
Observation of cold-rolling texture and partially recrystallized texture in polycrystalline 3 pct Si-Fe by high-resolution electron backscattered diffraction T. ImamuraY. HayakawaM. Kurosawa OriginalPaper Pages: 403 - 408
Response of semi-solid Sn-15 pct Pb to rapid shear-rate changes T. Y. LiuP. J. WardD. H. Kirkwood OriginalPaper Pages: 409 - 417
The coarsening of dispersed Al3Ti in aluminum-based matrices H. JonesW. M. Rainforth Communications Pages: 419 - 421
Spray deposited metal-carbon fiber reinforced polymer hybrid structures P. S. MohantyA. Argento Communications Pages: 421 - 424