1. Phase transformations in condensed systems revisited: Industrial applications

   • Morris E. Fine

   1996 Institute of Metals and Mehl Award Lecture Pages: 2397 - 2418

2. Thermodynamic studies and the phase diagram of the Li-Mg system

   • W. Gasior
   • Z. Moser
   • G. Schwitzgebel

   OriginalPaper Pages: 2419 - 2428

3. Experimental study of the phase equilibria in the Fe-Mn-Al system

   • Xing Jun Liu
   • Shi Ming Hao
   • Hui Chen

   OriginalPaper Pages: 2429 - 2435

4. Retardation of intermetallic phase formation in experimental superferritic stainless steels

   • S. Nana
   • M. B. Cortie

   OriginalPaper Pages: 2436 - 2444

5. Effect of alloying elements on martensitic transformation in the binary NiAl(β) phase alloys

   • R. Kainuma
   • H. Ohtani
   • K. Ishida

   OriginalPaper Pages: 2445 - 2453

6. Effects of low-temperature aging on the microstructure and soft magnetic properties of rapidly quenched Fe-Si-B alloys

   • T. Naohara

   OriginalPaper Pages: 2454 - 2460

7. Annealing and aging of interstitial C in α-Fe, As measured by internal friction

   • Wilson Pascheto
   • G. P. Johari

   OriginalPaper Pages: 2461 - 2469

8. Ostwald ripening of solid-liquid Pb-Sn dispersions

   • I. Seyhan
   • L. Ratke
   • P. W. Voorhees

   OriginalPaper Pages: 2470 - 2478

9. Precipitation behaviors in Al-Cu-Mg and 2024 aluminum alloys

   • Han-Cheng Shih
   • New-Jin Ho
   • J. C. Huang

   OriginalPaper Pages: 2479 - 2494

10. Hydrogen trapping and permeation in nickel thoria

    • A. K. Altunoglu
    • N.St J. Braithwaite

    OriginalPaper Pages: 2495 - 2503

11. Average effective interdiffusion coefficients and the Matano plane composition

    • M. A. Dayananda

    Transport Phenomena Pages: 2504 - 2509

12. Microstructural basis for the effect of chromium on the strength and toughness of AF1410-based high performance steels

    • Raghavan Ayer
    • P. M. Machmeier

    Mechanical Behavior Pages: 2510 - 2517

13. The fracture toughness of niobium-based,in situ composites

    • Kwai S. Chan

    Mechanical Behavior Pages: 2518 - 2531

14. A model study of cavity growth in superplasticity using single premachined holes

    • Atul H. Chokshi
    • Terence G. Langdon

    Mechanical Behavior Pages: 2532 - 2539

15. Cu-bearing high-strength low-alloy steels: The influence of microstructure on the initiation and growth of small fatigue cracks

    • D. L. Davidson
    • K. S. Chan
    • R. C. McClung

    Mechanical Behavior Pages: 2540 - 2556

16. High cycle fatigue behavior of gas-carburized medium carbon Cr-Mo steel

    • Hyung-Jun Kim
    • Young-Gak Kweon

    Mechanical Behavior Pages: 2557 - 2563

17. Analysis of damping in particle-reinforced superplastic zinc composites

    • Junsheng Lu
    • David C. Van Aken

    Mechanical Behavior Pages: 2565 - 2573

18. Microstructures relevant to brittle fracture initiation at the heat-affected zone of weldment of a low carbon steel

    • Kenji Ohya
    • Jongseop Kim
    • Michihiko Nagumo

    Mechanical Behavior Pages: 2574 - 2582

19. Microstructure and mechanical behavior of Cr-Cr₂Hfin situ intermetallic composites

    • K. S. Ravichandran
    • D. B. Miracle
    • M. G. Mendiratta

    Mechanical Behavior Pages: 2583 - 2592

20. High-temperature deformation processing of Ti-24Al-20Nb

    • P. K. Sagar
    • D. Banerjee
    • Y. V. R. K. Prasad

    Mechanical Behavior Pages: 2593 - 2604

21. Forming of tailor-welded blanks

    • F. I. Saunders
    • R. H. Wagoner

    OriginalPaper Pages: 2605 - 2616

22. Atmospheric stress corrosion cracking of a superplastic 7475 aluminum alloy

    • T. C. Tsai
    • T. H. Chuang

    OriginalPaper Pages: 2617 - 2627

23. Elevated temperature compressive properties of Zr-modified NiAl

    • J. Daniel Whittenberger
    • R. D. Noebe

    OriginalPaper Pages: 2628 - 2641

24. High-temperature behavior of precious metal base composites

    • I. M. Wolff
    • G. Sauthoff

    OriginalPaper Pages: 2642 - 2652

25. Corrosive wear of SiC Whisker-and particulate-reinforced 6061 aluminum alloy composites

    • S. Y. Yu
    • H. Ishii
    • T. H. Chuang

    OriginalPaper Pages: 2653 - 2662

26. Effects of nitrogen implantation on low cycle fatigue behavior of ferritic Fe-24Cr-4Al stainless alloy

    • S. M. Zhu
    • S. C. Tjong

    OriginalPaper Pages: 2663 - 2672

27. Thermodynamic activities and phase boundaries for the alloys of the Ni₃Al-Ni₃Ti pseudobinary section in the Ni-Al-Ti system

    • J. Kapala
    • D. Kath
    • K. Hilpert

    OriginalPaper Pages: 2673 - 2677

28. The influence of aqueous environments on low δK and high ΔK fatigue crack propagation behavior in low carbon structural steels

    • Masazumi Tanaka

    OriginalPaper Pages: 2678 - 2685

29. Initiation of stress corrosion cracking for pipeline steels in a carbonate-bicarbonate solution

    • Z. F. Wang
    • A. Atrens

    OriginalPaper Pages: 2686 - 2691

30. Characterization of constitutional liquid film migration in nickel-base alloy 718

    • V. L. Acoff
    • R. G. Thompson

    OriginalPaper Pages: 2692 - 2703

31. Retrograde solubility in semiconductors

    • Aindrea L. Mckelvey

    OriginalPaper Pages: 2704 - 2707

32. A model for macrosegregation and its application to Al-Cu castings

    • S. Chang
    • D. M. Stefanescu

    OriginalPaper Pages: 2708 - 2721

33. Determination of the solidification curves of commercial aluminum alloys

    • Sinn-wen Chen
    • Shih-chang Jeng

    OriginalPaper Pages: 2722 - 2726

34. Orientation dependence of primary dendrite spacing

    • CH. A. Gandin
    • M. Eshelman
    • R. Trivedi

    OriginalPaper Pages: 2727 - 2739

35. Transitions between type A flake, type D flake, and coral graphite eutectic structures in cast irons

    • J. S. Park
    • J. D. Verhoeven

    OriginalPaper Pages: 2740 - 2753

36. Equiaxed dendritic solidification with convection: Part I. Multiscale/multiphase modeling

    • C. Y. Wang
    • C. Beckermann

    OriginalPaper Pages: 2754 - 2764

37. Equiaxed dendritic solidification with convection: Part II. Numerical simulations for an Al-4 Wt pct Cu alloy

    • C. Y. Wang
    • C. Beckermann

    OriginalPaper Pages: 2765 - 2783

38. Equiaxed dendritic solidification with convection: Part III. Comparisons with NH₄Cl-H₂O experiments

    • C. Beckermann
    • C. Y. Wang

    OriginalPaper Pages: 2784 - 2795

39. Active wear and failure mechanisms of TiN-Coated high speed steel and tin-coated cemented carbide tools when machining powder metallurgically made stainless steels

    • Laizhu Jiang
    • Hannu HÄnninen
    • Veijo Kauppinen

    OriginalPaper Pages: 2796 - 2808

40. Abnormal growth of faceted (WC) grains in a (Co) liquid matrix

    • Young Joon Park
    • Nong Moon Hwang
    • Duk Yong Yoon

    OriginalPaper Pages: 2809 - 2819

41. NiTi and NiTi-TiC composites: Part IV. Neutron diffraction study of twinning and shape-memory recovery

    • D. C. Dunand
    • D. Mari
    • J. A. Roberts

    OriginalPaper Pages: 2820 - 2836

42. Tensile ductility and fracture of superplastic Aluminum-SiC composites under thermal cycling conditions

    • Gaspar González-Doncel
    • Oleg D. Sherby

    OriginalPaper Pages: 2837 - 2842

43. Observation of short fatigue crack-growth process in SiC-fiber-reinforced Ti-15-3 alloy composite

    • S. Q. Guo
    • Y. Kagawa
    • K. Honda

    OriginalPaper Pages: 2843 - 2851

44. The dependence of complex alloyed steel properties on quenching and tempering conditions

    • Bertold B. Vinokur
    • Alexandr Vinokur
    • Victoriya E. Shtessel

    Communications Pages: 2852 - 2859

45. The effect of substrate constraint on the martensitic transformation of Ni-Ti thin films

    • S. A. Mathews
    • Manfred Wuttig
    • Quanmin Su

    OriginalPaper Pages: 2859 - 2861