1. Foreword

   • N. M. Parikh
   • J. B. Cohen

   EditorialNotes Pages: 322 - 322

2. Physical metallurgy of recycling wrought aluminum alloys

   • J. B. Hess

   Symposium on Metallurgical Implications of Recycling Pages: 323 - 327

3. Nickel-base superalloys; physical metallurgy of recycling

   • J. J. deBARBADILLO

   Symposium on Metallurgical Implications of Recycling Pages: 329 - 341

4. Effect of recycling on residuals, processing, and properties of carbon and low-alloy steels

   • E. T. Stephenson

   Symposium on Metallurgical Implications of Recycling Pages: 343 - 353

5. Solid state SiC/Ni alloy reaction

   • M. R. Jackson
   • R. L. Mehan
   • E. L. Hall

   OriginalPaper Pages: 355 - 364

6. Thermomechanical treatments of a 1050 pearlite steel

   • L. J. Chen
   • T. W. Wu
   • H. C. Cheng

   OriginalPaper Pages: 365 - 378

7. The effect of the nitrogen potential on the coarsening kinetics of VN precipitates

   • Ö. E. Atasoy

   OriginalPaper Pages: 379 - 384

8. Kinetic enrichment of hydrogen at interfaces and voids by dislocation sweep-in of hydrogen

   • S. V. Nair
   • R. R. Jensen
   • J. K. Tien

   OriginalPaper Pages: 385 - 393

9. The development of nitrogen concentration profiles on nitriding iron

   • H. C. F. Rozendaal
   • E. J. Mittemeijer
   • P. J. Van Der Schaaf

   OriginalPaper Pages: 395 - 399

10. Intergranular zinc embrittlement and its inhibition by phosphorus in 55 pct Al-Zn-coated sheet steel

    • L. Allegra
    • R. G. Hart
    • H. E. Townsend

    OriginalPaper Pages: 401 - 411

11. Microstructure and Tensile Ductility in a β Heat Treated Titanium Alloy

    • D. Banerjee
    • D. Mukherjee
    • K. Bose

    OriginalPaper Pages: 413 - 420

12. Roughness-Induced Crack Closure: An Explanation for Microstructurally Sensitive Fatigue Crack Growth

    • G. T. Gray
    • J. C. Williams
    • A. W. Thompson

    OriginalPaper Pages: 421 - 433

13. The Effect of ITMT’s and P/M Processing on the Microstructure and Mechanical Properties of the X7091 Alloy

    • Victor W. C. Kuo
    • E. A. Starke

    OriginalPaper Pages: 435 - 447

14. High Temperature Low Cycle Fatigue of IN 738 and Application of Strain Range Partitioning

    • M. Y. Nazmy

    OriginalPaper Pages: 449 - 461

15. On the Portevin-Le Chatelier Effect Due to Snoek Strain Aging in the Niobium Oxygen System

    • S. C. Park
    • L. P. Beckerman
    • R. E. Reed-hill

    OriginalPaper Pages: 463 - 469

16. Effect of Sulfides and Sulfide Morphology on Anisotropy of Tensile Ductility and Toughness of Hot-Rolled C-Mn Steels

    • W. A. Spitzig

    OriginalPaper Pages: 471 - 484

17. Improvement in lower temperature mechanical properties of 0.40 pct C-Ni-Cr-Mo ultrahigh strength steel with the second phase lower bainite

    • Yoshiyuki Tomita
    • Kunio Okabayashi

    OriginalPaper Pages: 485 - 492

18. Orientation relationships between BeC Mo and FcC α in a Ni-Al-Mo-W superalloy

    • Dennis M. Dimiduk

    Communications Pages: 493 - 498

19. Tritium permeability and pressure dependence of 304l stainless steel in the temperature range 723 to 1023 k

    • Masao Matsuyama
    • J. D. Redman

    Communications Pages: 498 - 500

20. Alpha-Beta Interface Sliding in Ti-Mn Alloys

    • Sreeramamurthy Ankem
    • Harold Margolin

    Communication Pages: 500 - 503