1. Thermodynamic aspects of the constitution, grain refining, and solidification enthalpies of Al-Ce-Si alloys

   • Joachim Gröbner
   • Djordje Mirković
   • Rainer Schmid-Fetzer

   OriginalPaper Pages: 3349 - 3362

2. Austenite formation during intercritical annealing

   • J. Huang
   • W. J. Poole
   • M. Militzer

   OriginalPaper Pages: 3363 - 3375

3. Determination of isothermal transformation diagrams for sigma-phase formation in cast duplex stainless steels CD3MN and CD3MWCuN

   • Yoon-Jun Kim
   • L. Scott Chumbley
   • Brian Gleeson

   OriginalPaper Pages: 3377 - 3386

4. The nitriding kinetics of iron-chromium alloys; the role of excess nitrogen: Experiments and modelling

   • R. E. Schacherl
   • P. C. J. Graat
   • E. J. Mittemeijer

   OriginalPaper Pages: 3387 - 3398

5. Effect of initial grain size of austenite on hot-deformed structure of Ni-30Fe alloy

   • Dong-Woo Suh
   • Jae-Young Cho
   • Kotobu Nagai

   OriginalPaper Pages: 3399 - 3408

6. A micromechanical analysis of the yielding behavior of individual widmanstätten colonies of an α + β titanium alloy

   • Kwai S. Chan

   OriginalPaper Pages: 3409 - 3422

7. On cells and microbands formed in an interstitial-free steel during cold rolling at low to medium reductions

   • Q. Z. Chen
   • B. J. Duggan

   OriginalPaper Pages: 3423 - 3430

8. Effect of different Cr contents on tensile and corrosion behaviors of 0.13 pct N-containing CD4MCU cast duplex stainless steels

   • Younghwan Jang
   • Jinil Son
   • Byunghak Choi

   OriginalPaper Pages: 3431 - 3438

9. Deformation and failure of Zr₅₇Nb₅Al₁₀Cu_15.4Ni_12.6/W particle composites under quasi-static and dynamic compression

   • T. Jiao
   • L. J. Kecskes
   • K. T. Ramesh

   OriginalPaper Pages: 3439 - 3444

10. The microstructural, mechanical, and fracture properties of austenitic stainless steel alloyed with gallium

    • D. G. Kolman
    • J. F. Bingert
    • R. D. Field

    OriginalPaper Pages: 3445 - 3454

11. Two-layered Zr-base amorphous alloy/metal surface composites fabricated by high-energy electron-beam irradiation

    • Kyuhong Lee
    • Eunsub Yun
    • Mikhail G. Golkovski

    OriginalPaper Pages: 3455 - 3460

12. Formability and strength of friction-stir-welded aluminum sheets

    • M. P. Miles
    • T. W. Nelson
    • B. J. Decker

    OriginalPaper Pages: 3461 - 3468

13. Defect structures and room-temperature mechanical properties of C15 laves phases in Zr-Nb-Cr and Zr-Hf-Cr alloy systems

    • Y. Nakagawa
    • T. Ohta
    • T. Takasugi

    OriginalPaper Pages: 3469 - 3476

14. Effect of boron on the low-cycle fatigue behavior and deformation structure of INCONEL 718 at 650 °C

    • L. Xiao
    • M. C. Chaturvedi
    • D. L. Chen

    OriginalPaper Pages: 3477 - 3487

15. Fatigue and fracture behavior of bulk metallic glass

    • Z. F. Zhang
    • J. Eckert
    • L. Schultz

    OriginalPaper Pages: 3489 - 3498

16. Double loop electrochemical potentiokinetic reactivation test optimization in checking of duplex stainless steel intergranular corrosion susceptibility

    • T. Amadou
    • H. Sidhom
    • C. Braham

    OriginalPaper Pages: 3499 - 3513

17. Local electrochemical studies after heat treatment of stainless steel: Role of induced metallurgical and surface modifications on pitting triggering

    • H. Krawiec
    • V. Vignal
    • J. M. Olive

    OriginalPaper Pages: 3515 - 3521

18. Residual stress-affected diffusion during plasma nitriding of tool steels

    • Thomas K. Hirsch
    • Alexandre Da S. Rocha
    • Telmo R. Strohaecker

    OriginalPaper Pages: 3523 - 3530

19. The influence of strontium on porosity formation in Al-Si alloys

    • C. M. Dinnis
    • A. K. Dahle
    • M. O. Otte

    OriginalPaper Pages: 3531 - 3541

20. A novel experiment for the study of substrate-induced nucleation in metallic alloys: Application to Zn-Al

    • A. Quiroga
    • M. Rappaz
    • B. Gay

    OriginalPaper Pages: 3543 - 3550

21. Effects of alloy composition and casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys

    • Suyitno
    • V. I. Savran
    • D. G. Eskin

    OriginalPaper Pages: 3551 - 3561

22. Neutron diffraction study of texture development during hot working of different gamma-titanium aluminide alloys

    • H. -G. Brokmeier
    • M. Oehring
    • H. Clemens

    OriginalPaper Pages: 3563 - 3579

23. Mechanisms of Hf dopant incorporation during the early stage of chemical vapor deposition aluminide coating growth under continuous doping conditions

    • G. Y. Kim
    • L. M. He
    • J. A. Haynes

    OriginalPaper Pages: 3581 - 3593

24. The selection of the spray deposition rate during the spray rolling process

    • Yaojun Lin
    • Yizhang Zhou
    • Kevin M. McHugh

    OriginalPaper Pages: 3595 - 3603

25. Effect of Sn on microstructure and mechanical properties of Ti-base dendrite/ultrafine-structured multicomponent alloys

    • G. He
    • M. Hagiwara
    • J. Eckert

    OriginalPaper Pages: 3605 - 3612

26. Quantitative analysis of texture evolution of cold-rolled direct-chill-cast and continuous-cast AA5052 and AA5182 aluminum alloys during isothermal annealing

    • Y. M. Zhao
    • W. C. Liu
    • J. G. Morris

    OriginalPaper Pages: 3613 - 3629

27. Ferrite number as a function of the larson-miller parameter for austenitic stainless weld metals after creep testing

    • Y. Cui
    • Carl D. Lundin

    Communications Pages: 3631 - 3633

28. The transient to steady-state transition during the spray-rolling process

    • Yaojun Lin
    • Yizhang Zhou
    • Kevin M. McHugh

    Communications Pages: 3633 - 3635